Thermo-Mechanical Finite Element Modeling of the Laser Treatment of Titanium Cold-Sprayed Coatings
Source abstract
Abstract
This paper implements a thermo-mechanical model to simulate the laser treatment effects on a cold-sprayed titanium coating and aluminum substrate. The thermo-mechanical finite element model considers the transient temperature field due to the laser source and applied boundary conditions, using them as input loads for the subsequent stress-strain analysis. Numerical outcomes highlighted the relevance of thermal gradients and the presence of thermally-induced stress-strain fields responsible for promoting damage in the coating.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High-Temperature Coating Behaviors · High Entropy Alloys Studies · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Industrial Engineering, University of Salerno, Via Giovanni Paolo II 132, Fisciano, Salerno 84084, Italy
Department of Chemical, Materials and Industrial Production Engineering, University of Naples “Federico II”, P. Tecchio 80, Naples 80125, Italy
References (43)
Show source-provided references
1. Cold spraying of titanium: A review of bonding mechanisms, microstructure and properties10.4028/www.scientific.net/KEM.533.53 ↗
2. Bonding features and associated mechanisms in kinetic sprayed titanium coatings10.1016/j.actamat.2009.07.061 ↗
3. Elimination of porosity in directly fabricated titanium via cold gas dynamic spraying10.1016/j.jmatprotec.2008.03.005 ↗
4. Characterization of cold spray titanium deposits by X-ray microscopy and microtomography10.1017/S1431927608080355 ↗
5. Cold spray characteristics of commercially pure Ti and Ti-6Al-4V10.4028/www.scientific.net/AMR.89-91.639 ↗
6. An overview on the use of titanium in the aerospace industry10.1016/0921-5093(96)10233-1 ↗
7. Corrosion behavior of cold sprayed titanium coatings and free standing deposits10.1007/s11666-010-9540-x ↗
8. Corrosion performance of laser posttreated cold sprayed titanium coatings10.1007/s11666-011-9637-x ↗
9. Pathak, S., and Saha, G. (2017). Development of Sustainable cold spray coatings and 3D additive manufacturing components for repair/manufacturing applications: A critical review. Coatings, 7.10.3390/coatings7080122 ↗
10. Astarita, A., Rubino, F., Carlone, P., Ruggiero, A., Leone, C., Genna, S., Merola, M., and Squillace, A. (2016). On the improvement of AA2024 wear properties through the deposition of a cold-sprayed titanium coating. Metals, 6.10.3390/met6080185 ↗
11. Recrystallization of cold spray-fabricated CP titanium structures10.1007/s11666-008-9212-2 ↗
12. Steen, W.M., and Mazumder, J. (2010). Laser Material Processing, Springer.10.1007/978-1-84996-062-5 ↗
13. Ion, J. (2005). Laser Processing of Engineering Materials: Principles, Procedure and Industrial Application, Elsevier. [1st ed.].10.1016/B978-075066079-2/50009-X ↗
14. Selective laser post-treatment on titanium cold spray coatings10.1080/10426914.2015.1037912 ↗
15. Rubino, F., Paradiso, V., Astarita, A., Carlone, P., and Squillace, A. (2018). Advances in titanium on aluminium alloys cold spray coatings. Cold-Spray Coatings, Springer International Publishing.10.1007/978-3-319-67183-3_7 ↗
16. Selective laser treatment on cold-sprayed titanium coatings: Numerical modeling and experimental analysis10.1007/s11663-016-0636-7 ↗
17. Enhanced wear resistance of titanium surfaces by a new thermal oxidation treatment10.1016/S0043-1648(99)00359-2 ↗
18. Davis, J.R. (1993). ASM Specialty Handbook: Aluminum and Aluminum Alloys, ASM International.
19. Duncan, R.M., Hanson, B.H., Design Council, British Standards Institution, and Council of Engineering Institutions (1980). The Selection and Use of Titanium, Oxford University Press for the Design Council, the British Standards Institution, the Council of Engineering Institutions.
20. Finite element method applied to the quenching of steel cylinders using a multi-phase constitutive model10.1007/s00419-013-0733-x ↗
21. 3-D finite element modeling of laser cladding by powder injection: Effects of laser pulse shaping on the process10.1016/S0143-8166(03)00063-0 ↗
22. An experimentally based thermo-kinetic phase transformation model for multi-pass laser heat treatment by using high power direct diode laser10.1007/s00170-012-4029-z ↗
23. Roberts, I.A. (2012). Investigation of Residual Stresses in the Laser Melting of Metal Powders in Additive Layer Manufacturing. [Ph.D. Thesis, University of Wolverhampton].
24. Finite element simulation of the temperature and stress fields in single layers built without-support in selective laser melting10.1016/j.matdes.2013.05.070 ↗
25. Selective laser melting of iron-based powder10.1016/j.jmatprotec.2003.11.051 ↗
26. “Advanced mechanics of materials” 5th edition, A.P. Boresi, R.J. Schmidt and O.M. Sidebottom10.1111/j.1475-1305.1993.tb00852.x ↗
27. Cavaliere, P. (2018). Residual stresses in cold spray coatings. Cold-Spray Coatings, Springer International Publishing.10.1007/978-3-319-67183-3 ↗
28. Effects of substrate hardness and spray angle on the deposition behavior of cold-sprayed Ti particles10.1007/s11666-013-0039-0 ↗
29. Firm, K., Boyer, R., and Welsch, G. (1994). Materials Properties Handbook: Titanium Alloys, ASM International.
30. Thermomechanical modelling of laser surface glazing for H13 tool steel10.1007/s00339-018-1671-9 ↗
31. Marple, B.R., Agarwal, A., Hyland, M.M., Lau, Y.-C., Li, C.-J., Lima, R.S., and Montavon, G. (2010). Microstructure and mechanical properties of cold spray titanium coatings. Thermal Spray 2010: Global Solutions for Future Application, Proceedings of the International Thermal Spray Conference, Singapore, 3–5 May 2010, Springer.
32. Tensile stresses and their implication to cracking at pyramid indentation of pressure-sensitive hard metals and ceramics10.1016/S0921-5093(98)00752-7 ↗
33. Thermal stresses and their implication on cracking during laser melting of ceramic materials10.1016/j.actamat.2004.06.005 ↗
34. Hussain, T. (2011). A Study of Bonding Mechanisms and Corrosion Behaviour of Cold Sprayed Coatings. [Ph.D. Thesis, University of Nottingham].
35. Marple, B.R., Agarwal, A., Hyland, M.M., Lau, Y.-C., Li, C.-J., Lima, R.S., and Montavon, G. (2011). Ti-parts for aviation industry produced by cold spraying. Thermal Spray 2010: Global Solutions for Future Applications, Proceedings of the International Thermal Spray Conference, Singapore, 3–5 May 2011, Springer.
36. Lugscheider, E. (2005). Spray forming titanium alloys using the cold spray process. Thermal Spray Connects: Exploring Its Surfacing Potential, DVS-Verlag.
37. Marple, B.R., Li, C.-J., Hyland, M.M., Lima, R.S., Lau, Y.-C., and Montavon, G. (2008). Characterization of cold-sprayed Ni, Ti, Cu coating properties for their optimization. Thermal Spray: Crossing Borders, Proceedings of the 2008 International Thermal Spray Conference, Maastricht, the Netherlands, 2–4 June 2008, Springer.
38. Influence of helium and nitrogen gases on the properties of cold gas dynamic sprayed pure titanium coatings10.1007/s11666-010-9568-y ↗
39. Production of titanium deposits by cold-gas dynamic spray: Numerical modeling and experimental characterization10.1361/105996306X108219 ↗
40. Formation and characterization of anodized layers on CP Ti and Ti-6Al-4V biomaterials10.1016/0257-8972(92)90005-U ↗
41. Effect of thermal oxidation on corrosion and corrosion–wear behaviour of a Ti-6Al-4V alloy10.1016/j.biomaterials.2003.10.009 ↗
42. Oxygen diffusion hardening of cp-titanium for biomedical applications10.1088/1748-6041/5/5/054104 ↗
43. Oxygen boost diffusion for the deep-case hardening of titanium alloys10.1016/S0921-5093(99)00697-8 ↗