Study on Dimensional Stability of Veneer Rice Straw Particleboard

As an important industry of the national economy, the development of furniture manufacturing industry is very rapid. In particular, with the development of panel furniture industry, wood-based panels have become a necessary choice for furniture material for modern families in recent years. As a new particleboard material, in order to be more widely used in the furniture industry, it is not enough to have the characteristics of environmental protection. The material should also have excellent appearance and dimensional stability, so as to change people’s dependence on traditional wood-based panels. In this study, the rice straw particleboard (RSP) substrate was veneered by Betula sp. and Cyclobalanopsis glauca. In the process of veneering, different RSP specimens were treated by different sanding thicknesses and moisture contents of the RSP substrate, glue spread, species and thickness of veneer. The dimensional stability of different RSP specimens after veneering was analyzed. Based on the same variables, the change in the panel dimension and warp degree of the specimens of RSP which the sanding thickness was 0.2 mm were higher than the specimens with a sanding thickness of 0.6 mm. The dimensional stability of specimens of Cyclobalanopsis glauca veneer was better than that of Betula sp. veneer. A certain degree of change within the appropriate moisture content had a little effect on dimensional stability of veneered RSP. The greater of the amount of glue, the worse the dimensional stability of veneered RSP. The thinner the veneer, the worse was the dimensional stability of the veneered RSP.