The Effect of Direct and Pulsed Current in the Presence of Surfactants on the Electrodeposition of Zn–SiC Nanocomposite Coatings
Source abstract
Abstract
Zn–SiC nanocomposite coatings were electrodeposited from aqueous citrate electrolytes using either direct current deposition (DCD) or pulsed electrodeposition (PED). The effects of various surface-active organic compounds (SDS, gum arabic, gelatin, CTAB, PEG 20000, and Triton X–100) on the coatings’ surface morphology and chemical composition were studied. The influence of pulse frequency and duty cycle on the percentage of the SiC nanoparticles (NPs) incorporated and on the quality of the deposits was also investigated. The amount of SiC NPs incorporated in the Zn matrix was similar for layers obtained by DCD compared to PED. The Zn–SiC coating deposited by PED exhibited a more fine-grained surface morphology. The percentage of SiC co-deposited with Zn was mainly affected by the type of surfactant used. The ionic surfactants (cationic gelatin and CTAB or anionic gum arabic) allowed the co-deposition of considerably higher amounts of SiC NPs with Zn, compared to the non-ionic compounds PEG 20000 and Triton X–100. However, the use of high molecular weight organic compounds such as gelatin and gum arabic led to aggregation of SiC NPs within the Zn matrix.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Electrodeposition and Electroless Coatings · Corrosion Behavior and Inhibition · ZnO doping and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Biomaterials & Corrosion Laboratory, Department of Materials Science and Engineering, Tel-Aviv University, Ramat Aviv 6997801, Israel
Institute of Metallurgy and Material Science, Polish Academy of Sciences, Reymonta 25, 30-059 Krakow, Poland
School of Chemistry, Faculty of Exact Sciences, Tel-Aviv University, Ramat Aviv 6997801, Israel
Funding
National Centre for Research and Development in Poland · EU COST Action MP1407
References (61)
Show source-provided references
1. Eliaz, N., and Gileadi, E. (2019). Physical Electrochemistry: Fundamentals, Techniques, and Applications, Wiley-VCH. [2nd ed.].
2. An overview on the preparation, characterization and properties of electrodeposited-metal matrix nanocomposites
3. Effect of CTAB concentration in the electrolyte on the tribological properties of nanoparticle SiC reinforced Ni metal matrix composite (MMC) coating produced by electrodeposition10.1016/j.colsurfa.2012.11.048 ↗
4. Direct current electrodeposition of Zn and Zn-SiC nanocomposite coatings10.1179/0020296714Z.000000000187 ↗
5. Electro co-deposition and characterization of SiC in nickel metal matrix composite coatings on aluminium 707510.1016/j.proeng.2014.12.433 ↗
6. A review of the electrodeposition of metal matrix composite coatings by inclusion of particles in a metal layer: An established and diversifying technology10.1179/0020296713Z.000000000161 ↗
7. Development of Zn-SiC composite coatings: Electrochemical corrosion studies
8. Microstructural, phase evolution and corrosion properties of silicon carbide reinforced pulse electrodeposited nickel-tungsten composite coatings10.1016/j.apsusc.2015.12.179 ↗
9. Electrochemical preparation and characterization of Ni/SiC gradient deposit10.1016/j.jmatprotec.2003.07.008 ↗
10. Electrochemical deposition of nickel/SiC composites in the presence of surfactants10.1016/j.matchemphys.2004.04.022 ↗
11. Codeposition of micro- and nano-sized SiC particles in the nickel matrix composite coatings obtained by electroplating10.1016/j.surfcoat.2006.10.004 ↗
12. Effect of pulse electrodeposition parameters on the properties of Ni/nano-SiC composites10.1016/j.apsusc.2008.03.151 ↗
13. Codeposition of SiC particles with electrolytic nickel10.2478/v10172-011-0072-2 ↗
14. Narasimman, P., Pushpavanam, M., and Periasamy, V.M. (2012). Effect of Surfactant on the electrodeposition of Ni-SiC composites. Port. Electrochim. Acta, 30.10.4152/pea.201201001 ↗
15. ZnNi/SiC composites obtained from an alkaline bath10.1016/S0257-8972(02)00360-2 ↗
16. The influence of SiC and Al2O3 micrometric particles on the electrodeposition of ZnNi films and the ontainment of ZnNi-SiC and ZnNi-Al2O3 electrocomposite coatings from slightly acidic solutions10.1016/j.surfcoat.2007.04.084 ↗
17. Effects of SiC and Al2O3 particles on the electrodeposition of Zn, Co and ZnCo. I. Electrodeposition in the absence of SiC and Al2O310.1007/s10800-008-9670-8 ↗
18. Effect of SiC and Al2O3 particles on the electrodeposition of Zn, Co and ZnCo: Electrodeposition in the presence of SiC and Al2O3 and production of ZnCo-SiC and ZnCo-Al2O3 coatings10.1007/s10800-009-9803-8 ↗
19. Induced codeposition of alloys of tungsten, molybdenum and rhenium with transition metals10.1007/978-0-387-49489-0_4 ↗
20. Microstructure and composition of pulse plated Re–Ni alloys on a rotating cylinder electrode10.1016/j.jelechem.2014.08.016 ↗
21. Effect of pulse on-time and peak current density on pulse plated Re-Ni alloys10.1149/2.0111507jes ↗
22. Electrodeposition of Zn-TiO2 nanocomposite fils-effect of bath composition10.1007/s10008-007-0485-z ↗
23. Influence of the electrodeposition current regime on the corrosion resistance of Zn–CeO2 nanocomposite coatings10.1016/j.surfcoat.2014.04.051 ↗
24. Pulsed-reverse current electrodeposition of Zn and Zn-TiO2 nanocomposite films10.1016/j.surfcoat.2010.04.030 ↗
25. Pulsed electrodeposition of Zn in the presence of surfactants10.1016/j.electacta.2005.06.023 ↗
26. Roventi, G., Belezze, T., and Fratesi, R. (2012, January 16–19). Rivestimenti compositi Zn-SiC ottenuti per elettrodeposizione. Proceedings of XI AIMAT National Congress, Gaeta, Italy.
27. Electrodeposition of Zn-SiC nanocoposite coatings10.1007/s10800-013-0571-0 ↗
28. Preparation and corrosion resistance of pulse electrodeposited Zn and Zn-SiC nanocomposite coatings10.1016/j.apsusc.2013.12.143 ↗
29. Conway, B.E. (2005). Modern Aspects of Electrochemistry, Springer.10.1007/b106562 ↗
30. Native and structurally modified gum arabic: Exploring the effect of the gum’s microstructure in obtaining electroactive nanoparticles10.1016/j.carbpol.2014.11.020 ↗
31. The effect of additives on Zinc deposited from Zinc sulfate solutions10.1007/BF03222748 ↗
32. Current efficiency studies of the zinc electrowinning process on aluminum rotating cylinder electrode (RCE) in sulfuric acid medium: Influence of different additives10.1016/j.electacta.2007.04.112 ↗
33. Surface modification of γ-Al2O3 nano-particles with gum arabic and its applications in adsorption and biodesulfurization10.1016/j.surfcoat.2006.11.043 ↗
34. Influences of SiC concentration on Sn/SiC nanocomposite electrodeposition10.1016/S1452-3981(23)14272-6 ↗
35. Effects of dispersion surfactants on the properties of ceramic-carbon nanotube (CNT) nanocomposites10.1016/j.ceramint.2013.06.031 ↗
36. Electrodeposition of Re-Ni alloys from aqueous solutions with organic additives10.1016/j.tsf.2016.10.012 ↗
37. Electroplating and characterization of Zn–Ni, Zn–Co and Zn–Ni–Co alloys10.1016/j.surfcoat.2010.08.077 ↗
38. Electrodeposition of Zn–Ni, Zn–Fe and Zn–Ni–Fe alloys10.1016/j.surfcoat.2010.08.102 ↗
39. Corrosion behavior of composition modulated multilayer Zn–Co electrodeposits produced using a single-bath technique10.1007/s10800-008-9677-1 ↗
40. Synthesis and characterization of nickel tungsten alloys by electrodeposition10.1016/j.electacta.2004.11.038 ↗
41. Cationic polymers and their therapeutic potential10.1039/c2cs35094g ↗
42. Recent advancement of gelatin nanoparticles in drug and vaccine delivery10.1016/j.ijbiomac.2015.08.006 ↗
43. Competitive adsorption and displacement of anionic polysaccharides (fucoidan and gum arabic) on the surface of protein-coated lipid droplets10.1016/j.foodhyd.2015.08.023 ↗
44. Hydrodynamic properties of whole arabic gum
45. EQCM study of the adsorption of polyethyleneglycol with different molecular weights and its coadsorption with Cl− ions on Pt in perchloric acid solution10.1016/S1452-3981(23)15382-X ↗
46. Thermodynamic studies of PEG (Mw 20,000) adsorption onto a polycrystalline gold electrode10.1149/1.3551501 ↗
47. Thermodynamic study of PEG (Mw 20,000) adsorption in the presence of Cl-anions onto a polycrystalline gold electrode10.1149/2.065203jes ↗
48. Suppressing dendrite growth during zinc electrodeposition by PEG-200 additive10.1149/2.040311jes ↗
49. Zinc electrodeposition in the presence of polyethylene glycol 20,00010.1016/j.electacta.2006.10.042 ↗
50. Zn electrodeposition in the presence of surfactants Part I. Voltammetric and structural studies10.1016/j.electacta.2006.06.025 ↗
51. The influence of surfactant CTAB on the microstructure and material properties of Nickel microelectroforming
52. Zinc electrowinning from acidic sulfate solutions: Part I: Effect of sodium lauryl sulfate10.1023/A:1018431619595 ↗
53. Direct current electrodeposition of Zn-SiC nanocomposite coatings from citrate bath10.1149/2.0421811jes ↗
54. The effect of SiC nanoparticle size on the electrodeposition of Zn–SiC nanocomposite coatings from citrate bath10.1149/2.1271814jes ↗
55. Zinc-Nickel alloy deposition in the presence of citrate ions10.1007/BF00242202 ↗
56. Tin–Zinc alloy electrodeposition from aqueous citrate baths10.1016/j.surfcoat.2013.12.046 ↗
57. Electrodeposition of Sn–Zn and Sn–Zn–Mo layers from citrate solutions10.1016/j.susc.2012.08.010 ↗
58. Investigation of electrochemical co-deposition of zinc and molybdenum from citrate solutions10.1016/j.electacta.2012.12.140 ↗
59. Electrodeposition of Zn-Mn-Mo layers from citrate-based aqueous10.1016/j.electacta.2016.04.005 ↗
60. The influence of sorbitol on zinc film deposition, zinc dissolution process and morphology of deposits obtained from alkaline bath10.1007/s10800-006-9133-z ↗
61. The synergistic effects of additives on improving the electroplating of Zinc under high current densities10.1149/1.2967343 ↗