Oxidation Behavior of MoSi2-Coated TZM Alloys during Isothermal Exposure at High Temperatures
Source abstract
Abstract
Coating properties and oxidation behaviors of Si pack cementation-coated TZM (Mo-0.5Ti-0.1Zr-0.02C) alloys were investigated in order to understand the stability of the coating layer at high temperatures up to 1350 °C in an ambient atmosphere. After the pack cementation coatings, MoSi2 and Mo5Si3 layers were formed. When MoSi2-coated TZM alloys were oxidized in air at high temperatures, the Si in the outer MoSi2 layer diffused and formed SiO2. Also, due to the diffusion of Si, the MoSi2 layer was transformed into a columnar shaped Mo5Si3 phase. During isothermal oxidation, the Mo5Si3 phase was formed both within the coated MoSi2 layer and between the MoSi2 and the substrate. The coating properties and the oxidation behavior of the Si pack-coated TZM alloys were discussed along with the identification of growth kinetics.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Advanced ceramic materials synthesis · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Materials Science and Engineering, Hanbat National University, Daejeon 34158, Korea
Agency for Defense System, Yuseong P.O. Box 35-5, Daejeon 34060, Korea
Funding
national research foundation of republic of korea · Agency for defense development
References (23)
Show source-provided references
1. Studies on the development of TZM alloy by aluminothermic coreduction process and formation of protective coating over the alloy by plasma spray technique10.1016/j.ijrmhm.2011.04.010 ↗
2. In situ chemical vapour co-deposition of Al and Si to form diffusion coatings on TZM10.1016/j.msea.2008.03.020 ↗
3. Development of silicide coating over molybdenum based refractory alloy and its characterization10.1016/j.jnucmat.2010.06.014 ↗
4. Studies on the development of protective coating on TZM alloy and its subsequent characterization10.1016/j.jmatprotec.2007.12.075 ↗
5. The mechanical properties and fracture mechanisms of wrought low carbon arc cast (LCAC), molybdenum–0.5pct titanium–0.1pct zirconium (TZM), and oxide dispersion strengthened (ODS) molybdenum flat products10.1016/j.msea.2005.11.030 ↗
6. Oxidation and volatilization of TZM alloy in air10.1016/S0022-3115(00)00303-2 ↗
7. Oxidation behavior of MoSi2 and Mo(Si, Al)2 coated Mo–0.5Ti–0.1Zr–0.02C alloy10.1016/j.intermet.2010.12.002 ↗
8. Coating designs for oxidation control of Mo-Si-B alloys10.1016/S1359-6462(02)00070-2 ↗
9. Microstructure and oxidation resistance of a plasma sprayed Mo-Si-B multiphase alloy coating10.1016/S0966-9795(03)00069-4 ↗
10. Magnetron-sputtered oxidation protection coatings for Mo-Si-B alloys10.1016/j.corsci.2014.03.013 ↗
11. Thermal stability and mechanical properties of boron enhanced Mo–Si coatings10.1016/j.surfcoat.2015.09.015 ↗
12. Oxidation response of Al coated TZM alloys under dynamic plasma flame10.1016/j.ijrmhm.2013.02.011 ↗
13. Aluminum pack cementation of Mo-Si-B alloys10.1016/j.scriptamat.2006.07.044 ↗
14. Surface protection effect of diffusion pack cementation process by Al-Si powders with chloride activator on magnesium and its alloys10.2320/matertrans.MC200709 ↗
15. Oxidation of MoSi2-coated and uncoated TZM (Mo0.5Ti0.1Zr0.02C) alloys under high temperature plasma flame10.2320/matertrans.M2013065 ↗
16. Enhanced oxidation resistance of Mo-Si-B-Ti alloys by pack cementation10.1007/s11085-017-9730-8 ↗
17. High temperature environmental resistant Mo-Si-B based coatings10.1016/j.ijrmhm.2017.11.033 ↗
18. Diffusion structures in Mo vs Si solid-solid diffusion couples10.1016/S1359-6462(98)00111-0 ↗
19. Growth kinetics of three Mo-Silicide layers formed by chemical vapor deposition of Si on Mo substrate10.1016/S0257-8972(02)00015-4 ↗
20. The role of microstructure on pesting during oxidation of MoSi2 and Mo(Si,Al)2 at 773 K10.1007/BF01668515 ↗
21. Multiphase diffusion in binary and ternary solid-state systems10.1016/0079-6786(90)90007-3 ↗
22. Kirkaldy, J.S., and Young, D.J. (1988). Diffusion in the Condensed State, The Institute of Metals.
23. Diffusional reactions in composite synthesis10.1016/0921-5093(94)06500-4 ↗