Atomic Oxygen Adaptability of Flexible Kapton/Al2O3 Composite Thin Films Prepared by Ion Exchange Method
Source abstract
Abstract
Polyimide film (Kapton) is an important polymer material used for the construction of spacecrafts. The performance of Kapton can be degraded for atomic oxygen erosion in space. Commonly used atomic oxygen protective layers have issues such as poor toughness and poor adhesion with the film. In this paper, Kapton/Al2O3 nanocomposite films were prepared via an ion exchange method, and the optical properties, mechanical properties, and mechanisms for the change in the mass and microstructure, before and after atomic oxygen exposure, were analyzed. The results show that the deposition of the Kapton/Al2O3 surface nanocomposite film prepared via the ion exchange method has no obvious effects on the internal structure and optical transmittance of the Kapton film matrix. The tensile strength and elongation of the prepared film were much higher than those of the pure Kapton film, demonstrating its good flexibility. Scanning electron microscope (SEM) analysis showed that the etching pits had a carpet-like morphology on the composite film surface and were relatively small after atomic oxygen erosion. In contrast with the C–C bond rupture in the oxydianiline (ODA) benzene in Kapton films, the Kapton/Al2O3 nanocomposite film mainly destroyed the C=C bond in the pyromellitic dianhydride (PMDA) benzene ring. On exposure to an atomic oxygen environment for a short period, the Kapton/Al2O3 nanocomposite film exhibited improved atomic oxygen erosion resistance because the Al2O3 layer inhibited atomic oxygen diffusion. With increasing atomic oxygen exposure time, the atomic oxygen diffused into the Kapton matrix via the pores of the Al2O3 layer, causing damage to the substrate. This resulted in a detachment of the surface Al2O3 layer and exposure of the Kapton matrix, and thereby the atomic oxygen resistance was decreased. The applicability of the ion exchange mechanism of trivalent Al element on the surface modification of the polyimide is explored in this study. The behavior of the Kapton/Al2O3 composite film under the atomic oxygen environment of space is investigated, which provides the basis for studying the effects of atomic oxygen on the flexible protective Kapton film.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Silicone and Siloxane Chemistry · Synthesis and properties of polymers · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Tianjin Key Laboratory of Composite and Functional Materials, School of Materials Science and Engineering, Tianjin University, Tianjin 300350, China
Jizhong Energy Resources Co., LTD, Xingtai 054000, China
Department of environment, Shanghai Institute of Satellite Equipment, Shanghai 200240, China
School of Mechanical Engineering, Hebei University of Technology, Tianjin 300130, China
Funding
Natural Science Foundation of China · Natural Science Foundation of Hebei province
References (47)
Show source-provided references
1. Electrical insulation and dielectrics in the space environment10.1109/TEI.1987.299008 ↗
2. Nishikawa, T., Sonoda, K., and Nakanishi, K. (1988, January 26). Effect of atomic oxygen on polymers used as surface materials for spacecrafts, electrical insulating materials. Proceedings of the Twenty-First Symposium on Electrical Insulating Materials, Nerima, Japan.
3. Effects of 69 months in low earth orbit on Kapton antenna structures10.2514/3.26524 ↗
4. Reactions of atomic oxygen (O(3P)) with various polymer films10.1016/0141-3910(88)90004-3 ↗
5. Aluminum plasma immersion ion implantation in polymers10.1016/S0168-583X(03)00844-9 ↗
6. Metal ion implantation and dynamic ion mixing for the protection of high-performance polymers from severe oxidative environment10.1016/S0168-583X(98)00797-6 ↗
7. Banks, B.A., Mirtich, M.J., Rutledge, S.K., Swec, D.M., and Nahra, H.K. (1985, January 14–17). Ion beam sputter-deposited thin film coatings for protection of spacecraft polymers in low earth orbit, NASA TM-87051. Proceedings of the 23rd Aerospace Science Meeting, Reno, NV, USA.10.2514/6.1985-420 ↗
8. Protection of polymer from atomic-oxygen erosion using Al2O3 atomic layer deposition coatings10.1016/j.tsf.2007.07.150 ↗
9. Atomic oxygen protective coatings for Kapton film: A review10.1016/0257-8972(93)90169-O ↗
10. Effect of low earth orbit atomic oxygen on spacecraft materials10.1007/BF00354389 ↗
11. Multiple layer coating scheme to protect polymer films from atomic oxygen erosion10.1016/0040-6090(94)90062-0 ↗
12. The space atomic oxygen environment erosion on spacecraft surfaces and its protection techniques
13. Evaluation of protective Silicone/Siloxane coatings in simulated low-earth-orbit environment10.2514/1.15787 ↗
14. Low earth orbit resistant siloxane copolymers10.1002/(SICI)1097-4628(19960425)60:4<591::AID-APP12>3.0.CO;2-2 ↗
15. Bridged bisimide polysilsesquioxane xerogels: New hybrid organic-inorganic materials10.1021/cm960440i ↗
16. Resistance of polyimide/silica hybrid films to atomic oxygen attack10.1016/j.surfcoat.2005.09.028 ↗
17. Atomic oxygen irradiation induced degradation of polyimide without and with siloxane coating
18. Atomic-oxygen undercutting of long duration exposure facility atomized-Kapton multilayer insulation10.2514/3.26492 ↗
19. Investigation on sol-gel boehmite-AlOOH films on Kapton and their erosion resistance to atomic oxygen10.1016/j.tsf.2008.01.023 ↗
20. Influence of surface treatment of polyimide film on adhesion enhancement between polyimide and metal films10.5012/bkcs.2007.28.2.188 ↗
21. Controlling interparticle spacing among metal nanoparticles through metal-catalyzed decomposition of surrounding polymer matrix10.1021/ja050735+ ↗
22. Formation and characterization of cobalt oxide layers on polyimide films via surface modification and ion-exchange technique10.1016/j.tsf.2009.12.004 ↗
23. Site-Selective direct silver metallization on surface-modified polyimide Layers10.1021/la034888r ↗
24. Preparation of surface conductive and highly reflective silvered polyimide films by surface modification and in situ self-metallization technique10.1016/j.tsf.2005.07.286 ↗
25. Fabrication of nickel oxide nanocomposite layer on a flexible polyimide substrate via ion exchange technique10.1021/am900620u ↗
26. Formation and growth of copper nanoparticles from ion-doped precursor polyimide layers10.1021/jp0478559 ↗
27. Copper/polyimide heterojunctions: Controlling interfacial structures through an additive-based, all-wet chemical process using ion-doped precursors10.1002/adfm.200600527 ↗
28. Preparation of polyimide/zinc oxide nanocomposite films via an ion-exchange technique and their photoluminescence properties10.1155/2011/950832 ↗
29. Preparation of highly reflective and conductive metallized polyimide films through surface modification: Processing, morphology and properties10.1039/B509537A ↗
30. Hydrothermally synthesized ternary heterostructured MoS2/Al2O3/g-C3N4 photocatalyst10.1016/j.materresbull.2017.03.008 ↗
31. (2007). National Standards of the People’s Republic of China, GB/T 1040.3-2006 Plastics—Determination of Tensile properties—Part 3: Test Conditions for Films and Sheet, China Standards Press.
32. Surface treatment of 25-μm Kapton film by ammonia for improvement of TiO2/SiO2 coating’s adhesion10.1002/sia.6231 ↗
33. The color of finely dispersed nanoparticles10.1007/s003400100666 ↗
34. Changes in the shape and optical properties of gold nanoparticles contained within alumina membranes due to low-temperature annealing10.1021/jp971267w ↗
35. Spectroscopic studies of poly [N, N′-bis (phenoxy phenyl) pomalidomide]. 1. structures of the polyimide and three model compounds10.1021/ma60076a011 ↗
36. Analysis of structure and imidization of poly (amic acid) using FTIR spectroscopy10.3724/SP.J.1095.2011.00332 ↗
37. An ATR-FTIR study of water in cellulose acetate membranes prepared by phase inversion10.1016/0376-7388(95)00089-U ↗
38. Banks, B.A., Miller, S.K., and Groh, K.K.D. (2004, January 16–19). Low earth orbital atomic oxygen interactions with materials. Proceedings of the 2nd International Energy Conversion Engineering Conference, Providence, RI, USA.10.2514/6.2004-5638 ↗
39. Oxidation kinetics of siliconized TiAl-based alloy
40. Kinetic model and mechanisms of oxidation of 2D 2C/C composite
41. Du, H., and Ye, Z.H. (1996). LEO Spacecraft Space Environment Manua, National Defense Industry Press. [1st ed.].
42. In situ erosion study of Kapton using novel hyperthermal oxygen atom source10.2514/2.3435 ↗
43. Ground-based investigations of atomic oxygen erosion behaviors of Al2O3 coating on Kapton
44. Origin of the carbon 1s-core level shifts in polyimide model compounds10.1002/pol.1985.170231113 ↗
45. Beamson, G., and Briggs, D. (1998). High Resolution XPS of Organic Polymers: The Scienta ESCA300 Database, John Wiley & Sons.
46. Evaluation of the effect of surface roughness on thin film thickness measurements using variable angle XPS10.1016/0169-4332(89)90500-X ↗
47. XPS and X-ray AES (XAES) study of different aluminate compounds