Facile One-Step Method to Fabricate a Slippery Lubricant-Infused Surface (LIS) with Self-Replenishment Properties for Anti-Icing Applications
Source abstract
Abstract
In this work, a slippery lubricant-infused surface (LIS) was prepared by simple one-step mixing of polydimethylsiloxane (PDMS) resin and dimethyl silicone oil (PMX-200) directly. Silicone oil showed good compatibility with PDMS resin, and the added amount of silicone oil had no significant effect on the surface morphology of LIS. According to the results of surface observations, once the silicone oil film anchored on the LIS was removed, the silicone oil inside the PDMS polymer automatically diffused to the surface and formed a new silicone oil film again in a short time. Furthermore, with the increase of silicone oil content, the oil self-replenishment speed and amount of the LIS were enhanced, which also promoted a decrease of the surface water sliding angle and the improvement of the lubrication ability of the LIS. In the icing/deicing cycle tests, the slippery LIS still maintained very low ice adhesion strength after 24 cycles, showing excellent anti-icing performance.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Surface Modification and Superhydrophobicity · Adhesion, Friction, and Surface Interactions · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
CNPC Tubular Goods Research Institute, State Key Laboratory for Performance and Structure Safety of Petroleum Tubular Goods and Equipment Materials, Xi’an, Shaanxi 710077, China
Corrosion and Protection Center, Institute for Advanced Materials and Technology, University of Science and Technology Beijing, Beijing 100083, China
Hengyang Valin Steel Tube Co., Ltd., Hengyang, Hunan 421001, China
Petro China Traim Oilfield Company, Korla 841000, China
Funding
China Postdoctoral Science Foundation · the Basic Research and Strategic Reserve Technology Research Fund (project of China National Petroleum Corporation)
References (50)
Show source-provided references
1. Design of anti-icing surfaces: Smooth, textured or slippery?10.1038/natrevmats.2015.3 ↗
2. Bio-inspired strategies for anti-icing10.1021/nn406522n ↗
3. Anti-icing coating with an aqueous lubricating layer10.1021/am501252u ↗
4. Application of anti-icing coating based on adsorption of functional substances by microporous sphere10.1016/j.porgcoat.2019.105320 ↗
5. Fabrication and anti-icing property of coral-like superhydrophobic aluminum surface10.1016/j.apsusc.2015.01.066 ↗
6. Bioinspired surfaces with superwettability for anti-Icing and ice-phobic application: Concept, mechanism, and design10.1002/smll.201701867 ↗
7. Fabrication of superhydrophobic coating via spraying method and its applications in anti-icing and anti-corrosion10.1016/j.apsusc.2016.07.138 ↗
8. Magnetic particle-based super-hydrophobic coatings with excellent anti-icing and thermoresponsive deicing performance10.1039/C5TA05277G ↗
9. Superhydrophobic carbon nanotubes/epoxy nanocomposite coating by facile one-step spraying10.1016/j.surfcoat.2018.01.045 ↗
10. Moving superhydrophobic surfaces toward real-world applications10.1126/science.aaf2073 ↗
11. Mussel-inspired superhydrophobic surfaces with enhanced corrosion resistance and dual-action antibacterial properties10.1016/j.msec.2017.07.002 ↗
12. Superhydrophobic surfaces: A review on fundamentals, applications, and challenges10.1007/s11998-017-0011-x ↗
13. The role of surface morphology in the barrier properties of epoxy coatings in different corrosion environments10.1016/j.porgcoat.2016.11.002 ↗
14. Superhydrophilic anti-fouling electrospun cellulose acetate membranes coated with chitin nanocrystals for water filtration10.1016/j.memsci.2016.02.069 ↗
15. Superhydrophobic drag reduction in laminar flows: A critical review10.1007/s00348-016-2264-z ↗
16. Robust superhydrophobic TiO2@ fabrics for UV shielding, self-cleaning and oil–water separation10.1039/C4TA05332J ↗
17. Dual-action smart coatings with a self-healing superhydrophobic surface and anti-corrosion properties10.1039/C6TA10903A ↗
18. Mechanically robust superhydrophobic steel surface with anti-icing, UV-durability, and corrosion resistance properties10.1021/acsami.5b00558 ↗
19. Anti-icing properties of a superhydrophobic surface in a salt environment: An unexpected increase in freezing delay times for weak brine droplets10.1039/C5CP06988B ↗
20. Comparison of barrier properties for a superhydrophobic epoxy coating under different simulated corrosion environments10.1016/j.corsci.2015.11.023 ↗
21. Superhydrophobic materials and coatings: A review10.1088/0034-4885/78/8/086501 ↗
22. Mechanical durability of superhydrophobic surfaces: The role of surface modification technologies10.1016/j.apsusc.2016.09.049 ↗
23. Strategies for anti-icing: Low surface energy or liquid-infused?10.1039/C6RA11383D ↗
24. Recent developments in air-trapped superhydrophobic and liquid-infused slippery surfaces for anti-icing application10.1016/j.porgcoat.2019.105373 ↗
25. Slippery liquid-infused porous electric heating coating for anti-icing and de-icing applications10.1016/j.surfcoat.2019.06.077 ↗
26. Slippery liquid-infused porous surface bio-inspired by pitcher plant for marine anti-biofouling application10.1016/j.colsurfb.2015.09.019 ↗
27. Corrosion protection application of slippery liquid-infused porous surface based on aluminum foil10.1016/j.apsusc.2017.06.170 ↗
28. Apparent contact angle and contact angle hysteresis on liquid infused surfaces10.1039/C6SM00920D ↗
29. Slippery liquid-infused porous surface fabricated on CuZn: A barrier to abiotic seawater corrosion and microbiologically induced corrosion10.1016/j.apsusc.2018.06.139 ↗
30. Slippery liquid-infused porous surface for corrosion protection with self-healing property10.1016/j.cej.2018.03.137 ↗
31. Slippery liquid-infused porous surfaces that prevent microbial surface fouling and kill non-adherent pathogens in surrounding media: A controlled release approach10.1002/adfm.201505522 ↗
32. Hydrophobic liquid-infused porous polymer surfaces for antibacterial applications10.1021/am401532z ↗
33. Durable lubricant-infused anodic aluminum oxide surfaces with high-aspect-ratio nanochannels10.1016/j.cej.2019.02.163 ↗
34. Robust slippery coating with superior corrosion resistance and anti-icing performance for AZ31B Mg alloy protection10.1021/acsami.7b00972 ↗
35. Slippery liquid infused porous TiO2/SnO2 nanocomposite thin films via aerosol assisted chemical vapour deposition with anti-icing and fog retardant properties10.1021/acsami.9b14160 ↗
36. Long-term stability of a liquid-infused coating with anti-corrosion and anti-icing potentials on Al alloy10.1002/celc.201900302 ↗
37. Silicone oil-infused slippery surfaces based on Sol–Gel process-induced nanocomposite coatings: A facile approach to highly stable bioinspired surface for biofouling resistance10.1021/acsami.6b09879 ↗
38. Anti-adhesion effects of liquid-infused textured surfaces on high-temperature stainless steel for soft tissue10.1016/j.apsusc.2016.05.110 ↗
39. Improvement of lubricant-infused surfaces for anti-icing applications10.1680/jsuin.16.00026 ↗
40. Solvent-tunable PDMS microlens fabricated by femtosecond laser direct writing10.1039/C4TC02737J ↗
41. Investigation on artificial blood vessels prepared from bacterial cellulose10.1016/j.msec.2014.10.023 ↗
42. Mussel-inspired superhydrophilic surface with enhanced antimicrobial properties under immersed and atmospheric conditions10.1016/j.apsusc.2018.09.173 ↗
43. A combination structure of microblock and nanohair fabricated by chemical etching for excellent water repellency and icephobicity10.1016/j.apsusc.2018.06.043 ↗
44. Sticky or slippery wetting: Network formation conditions can provide a one-way street for water flow on platinum-cured silicone10.1021/acsami.6b02066 ↗
45. One-step fabrication of bioinspired lubricant-regenerable icephobic slippery liquid-infused porous surfaces10.1021/acsomega.8b01148 ↗
46. A simple way to a slippery lubricant impregnated coating with ultra-stability and self-replenishment property10.1021/acs.iecr.9b01176 ↗
47. Effect of silicone oil viscosity on emulsification10.1001/archopht.1987.01060040116047 ↗
48. Transparent, wear-resistant, superhydrophobic and superoleophobic poly (dimethylsiloxane)(PDMS) surfaces10.1016/j.jcis.2016.10.094 ↗
49. Designing durable icephobic surfaces10.1126/sciadv.1501496 ↗
50. Durability of a lubricant-infused Electrospray Silicon Rubber surface as an anti-icing coating10.1016/j.apsusc.2015.02.051 ↗