Comparative Effects of Fine and Conventional Shot Peening on Surface Morphology, Topography, Wettability, and Antibacterial Activity of Biomedical Ti6Al4V Alloy

Interest in textured surfaces for biomaterials and implants is increasing, with shot peening emerging as a promising method for surface modification. This study investigates the influence of conventional and fine shot peening on the surface morphology, topography, wettability, and antibacterial properties of biomedical-grade Ti6Al4V alloy. Peening was conducted using a custom-built, fully automated system, employing fine (100–200 µm) and coarse (700–1000 µm) shots using well-controlled sets of parameters. Both treatments introduced severe plastic deformation on the surface, resulting in increased roughness. Conventionally shot-peened samples exhibited deeper and wider dimples compared to finely peened ones. Surface wettability shifted from hydrophilic (contact angle: ~4°, untreated) to hydrophobic, reaching contact angles of ~91° and ~100° for fine and conventional shot peening, respectively. Antibacterial assays against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) were evaluated by normalizing colony counts to the untreated Ti6Al4V surface. The inherent antibacterial response of Ti6Al4V against E. coli was preserved after both shot peening treatments, showing no notable increase in bacterial proliferation. In contrast, adhesion of S. aureus increased, more notably on fine shot-peened surfaces, indicating a strain-specific response influenced by surface roughness and wettability. In summary, both fine and conventional shot peening altered the surface morphology, topography, and wettability of Ti6Al4V. At the same time, their antibacterial influence was strain-dependent, underscoring the need for careful parameter selection in biomedical applications.