Development and Performance Study of a Slow-Releasing Anti-Icing Fog Seal Based on Response Surface Methodology

To prevent traffic accidents caused by icy roads in winter and damage to roads resulting from repeated freeze–thaw cycles, this paper proposes an optimized design plan for slow-release anti-icing fog seal. The effects of the dosages of slow-release anti-icing agent, water-based epoxy resin modifier, and penetrant on the ice- and snow-melting properties, mechanical properties, and penetration properties of the fog seal were investigated. Based on single-factor experiments, a Box–Behnken model was established, and the response surface method was employed to optimize the design of the fog seal. Subsequently, wear resistance was assessed using an accelerated loading test, while anti-skid performance was evaluated through the British pendulum test and the sand patch test. The results indicate that the optimal ratio for the slow-release anti-icing fog seal is 13% slow-release anti-icing agent, 20% water-based epoxy resin modifier, and 12% penetrant. This material demonstrated excellent ice- and snow-melting performance as well as good wear and skid resistance in testing, providing valuable insights for the application of the slow-release anti-icing agent in new pavement maintenance techniques.