Rolling Contact Fatigue Damage Analysis of G10CrNi3Mo Steel Bearing Inner Ring by X-ray Measurements
Source abstract
Abstract
Contact fatigue is the main failure model for bearing systems in steel rolling mills. Characterizing the degree of contact fatigue damage is important for predicting its operating life. In this paper, the X-ray diffraction method (XRD) is used to measure the residual stress state and the diffraction peak width (FWHM, full width at half maximum) of six samples with different degrees of contact fatigue failure. The results show that surface residual stress values increased by more than 70% compared with the original state, while the diffraction peak width values decreased by more than 7% and were strongly correlated with the degree of contact fatigue damage. The XRD measurement of the bearing inner ring enables the characterization of the evolution of the residual stress state and grain distortion due to damage development. FWHM values may be considered an indicator for predicting the degree of contact fatigue.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels · Advanced machining processes and optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Research Institute, Baoshan Iron & Steel Co., Ltd., Shanghai 201900, China
School of Materials and Chemistry, University of Shanghai for Science and Technology, 516 Jungong Road, Shanghai 200093, China
References (34)
Show source-provided references
1. Root Cause Failure Analysis of Outer Ring Fracture of Four-Row Cylindrical Roller Bearing10.1080/10402000802180151 ↗
2. Vibrations of tandem cold rolling mill: Coupled excitation of rolling force and variable stiffness of fault-free back-up roll bearing10.1007/s42243-022-00886-1 ↗
3. Multiscale modeling and simulation of rolling contact fatigue10.1016/j.ijfatigue.2017.11.005 ↗
4. Further understanding of rolling contact fatigue in rolling element bearings—A review10.1016/j.triboint.2019.105849 ↗
5. An approach for predicting failure mechanism in rough surface rolling contact fatigue10.1016/j.triboint.2021.106923 ↗
6. Study on gear contact fatigue failure competition mechanism considering tooth wear evolution10.1016/j.triboint.2020.106277 ↗
7. Rolling contact fatigue in refurbished case carburized bearings10.1016/j.triboint.2017.05.026 ↗
8. Palmgren, A.J.P.S.I.I. (1959). Ball and Roller Bearing Engineering, S.H. Burbank & Co. Press.
9. Rolling-Contact Fatigue Studies with Four Tool Steels and a Crystallized Glass Ceramic10.1115/1.3662277 ↗
10. A new approach for safety life prediction of industrial rolling bearing based on state recognition and similarity analysis10.1016/j.ssci.2019.104530 ↗
11. Finite element simulation of subsurface initiated damage from non-metallic inclusions in wind turbine gearbox bearings10.1016/j.ijfatigue.2019.105347 ↗
12. Measurement of strain evolution in overloaded roller bearings using time-of-flight neutron diffraction10.1016/j.matdes.2020.108571 ↗
13. Microstructure, properties and synergetic effect of graphene oxide-functionalized carbon nanotubes hybrid reinforced copper matrix composites prepared by DC electrodeposition10.1016/j.carbon.2023.118157 ↗
14. Microstructure and properties of graphene oxide reinforced copper-matrix composite foils fabricated by ultrasonic assisted electrodeposition10.1016/j.msea.2023.144995 ↗
15. Surface characteristics and stress corrosion behavior of AA 7075-T6 aluminum alloys after different shot peening processes10.1016/j.surfcoat.2022.128481 ↗
16. Surface characteristic and wear resistance of QT-700-2 nodular cast iron after laser quenching combing with shot peening treatment10.1016/j.surfcoat.2021.127589 ↗
17. Residual stress distribution as a function of depth in graphite/copper brazing joints via X-ray diffraction10.1016/j.jmst.2019.07.023 ↗
18. Failure analysis of rolling bearings by X-ray measurement of residual stress10.1016/0043-1648(73)90005-7 ↗
19. Characterization of Dislocation Evolution in Cyclically Loaded Austenitic and Ferritic Stainless Steels via XRD Line-profile Analysis10.2355/isijinternational.ISIJINT-2019-077 ↗
20. Hübschen, G., Altpeter, I., Tschuncky, R., and Herrmann, H.-G. (2016). Materials Characterization Using Nondestructive Evaluation (NDE) Methods, Woodhead Publishing.
21. Radial-shear rolling of high-strength aluminum alloys: Finite element simulation and analysis of microstructure and mechanical properties10.1016/j.msea.2020.139424 ↗
22. Relation of hardness with FWHM and residual stress of GCr15 steel after shot peening10.1016/j.apsusc.2017.09.136 ↗
23. Contact fatigue damage analysis of shot peened gears by means of X-ray measurements10.1016/j.engfailanal.2008.08.020 ↗
24. Rail RCF damage quantification and comparison for different dam-age models10.1007/s40534-021-00253-y ↗
25. Rail rolling contact fatigue formation and evolution with surface defects10.1016/j.ijfatigue.2022.106762 ↗
26. Effects of surface defects on rolling contact fatigue of rail10.1016/j.proeng.2011.04.212 ↗
27. Investigation on rolling contact fatigue of railway wheel steel with surface defect10.1016/j.wear.2020.203207 ↗
28. Surface roughness in grinding outer ring inner raceway of tapered roller bearing
29. Optimization of grinding efficiency considering surface integrity of bearing raceway10.1007/s42452-019-0697-8 ↗
30. Effect of the residual stress on contact fatigue of a wind turbine carburized gear with multiaxial fatigue criteria10.1016/j.ijmecsci.2018.11.013 ↗
31. Effect of vibration amplitude and axle load on the rail rolling contact fatigue under water condition10.1016/j.ijfatigue.2022.107329 ↗
32. Accelerated discovery of composition-carbide-hardness linkage of Stellite alloys assisted by image recognition10.1016/j.scriptamat.2023.115539 ↗
33. Role of Cr-rich carbide precipitates in the intergranular oxidation of Ni-Cr alloys10.1016/j.scriptamat.2018.07.016 ↗
34. Residual stresses after deep rolling of a torsion bar made from high strength steel10.1016/j.jmatprotec.2014.11.042 ↗