Tribological Behavior and Mechanism of Plasma-Sprayed High-Entropy Monoboride Coating over a Wide Temperature Range
Source abstract
Abstract
Due to the extremely high hardness of high-entropy monoborides (HEMB), this study successfully prepared a new type of HEMB-(V0.2Cr0.2Ta0.2Mo0.2W0.2)B coating by adjusting the spraying process using atmospheric plasma spraying technology. The high-entropy coating was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS). The change rule concerning the alteration in the phase composition of the coating surface with power and protective atmosphere was explored, indicating that with the decrease in power and the application of a protective atmosphere, the generation of oxide on the coating surface is successfully inhibited. The wear resistance of the coating in a temperature range from room temperature to 800 °C was evaluated in dry sliding wear test conditions. The results indicated that the wear mechanism of (V0.2Cr0.2Ta0.2Mo0.2W0.2)B coating below 400 °C is abrasive wear, and above 400 °C, the wear mechanism is mainly oxidative wear.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Entropy Alloys Studies · Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Materials Science and Engineering, Zhengzhou University, Zhengzhou 450001, China
Zhongyuan Critical Metals Laboratory, Zhengzhou University, Zhengzhou 450002, China
Funding
National Natural Science Foundation of China · Project of Zhongyuan Critical Metals Laboratory
References (34)
Show source-provided references
1. A novel strategy to enhance micro/nano-tribological properties of DLC film by combining micro-pattern and thin ionic liquids film10.1016/j.colsurfa.2013.03.047 ↗
2. Failure analysis of a run-of-the-river hydroelectric power plant10.1016/j.engfailanal.2016.05.035 ↗
3. Recent advances in the development of aerospace materials10.1016/j.paerosci.2018.01.001 ↗
4. Corrosion protection by chemical vapor deposition: A review10.1515/CORRREV.2005.23.4-5-6.355 ↗
5. Tribology of hard coating alloys deposited by thermal methods: Applications to industrial components10.1016/j.surfcoat.2008.08.061 ↗
6. Contact and rubbing of flat surfaces10.1063/1.1721448 ↗
7. Entropy-stabilized oxides10.1038/ncomms9485 ↗
8. High-entropy ceramics: Present status, challenges, and a look forward10.1007/s40145-021-0477-y ↗
9. High entropy oxides for reversible energy storage10.1038/s41467-018-05774-5 ↗
10. Ultrafine-grained high-entropy zirconates with superior mechanical and thermal properties
11. Novel processing route for the fabrication of bulk high-entropy metal diborides10.1016/j.scriptamat.2018.08.039 ↗
12. Synthesis of superfine high-entropy metal diboride powders10.1016/j.scriptamat.2019.03.038 ↗
13. Irradiation damage in (Zr0.25Ta0.25Nb0.25Ti0.25) C high-entropy carbide ceramics10.1016/j.actamat.2020.06.011 ↗
14. Castle, E., Csanádi, T., Grasso, S., Dusza, J., and Reece, M. (2018). Processing and properties of high-entropy ultra-high temperature carbides. Sci. Rep., 8.10.1038/s41598-018-26827-1 ↗
15. Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys10.1016/j.intermet.2011.01.004 ↗
16. Solid solution alloys of AlCoCrFeNiTix with excellent room-temperature mechanical properties10.1063/1.2734517 ↗
17. Microstructure and wear behavior of AlxCo1. 5CrFeNi1. 5Tiy high-entropy alloys10.1016/j.actamat.2011.06.041 ↗
18. Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off10.1038/nature17981 ↗
19. Hydrogen storage properties of multi-principal-component CoFeMnTixVyZrz alloys10.1016/j.ijhydene.2010.06.012 ↗
20. The role of compositional tuning of the distributed exchange on magnetocaloric properties of high-entropy alloys10.1007/s11837-017-2523-3 ↗
21. Discovery of a superconducting high-entropy alloy10.1103/PhysRevLett.113.107001 ↗
22. Transition metal borides: Superhard versus ultra-incompressible10.1002/adma.200703025 ↗
23. A novel high-entropy monoboride (Mo0.2Ta0.2Ni0.2Cr0.2W0.2) B with superhardness and low thermal conductivity10.1016/j.ceramint.2020.07.131 ↗
24. Ablation behavior of plasma-sprayed La1–xSrxTiO3+δ coating irradiated by high-intensity continuous laser10.1021/acsami.7b11034 ↗
25. Characterization of thick plasma spray tungsten coating on ferritic/martensitic steel F82H for high heat flux armor10.1016/j.jnucmat.2008.12.219 ↗
26. Vacuum annealing enhances the properties of a tungsten coating deposited on copper by atmospheric plasma spray10.1016/j.jnucmat.2012.07.017 ↗
27. Effect of annealing with pressure on tungsten film properties fabricated by atmospheric plasma spray10.1007/s12540-014-6006-6 ↗
28. Effect of oxidation behavior on the mechanical and thermal properties of plasma sprayed tungsten coatings10.1007/s11666-008-9190-4 ↗
29. A high-entropy (Yb0.2Y0.2Lu0.2Ho0.2Er0.2)2Si2O7 environmental barrier coating prepared by atmospheric plasma-spray10.1016/j.ceramint.2022.11.332 ↗
30. Guo, H., Zhang, X.-N., Chen, J., Li, H.-P., and Ostrikov, K. (2018). Non-equilibrium synergistic effects in atmospheric pressure plasmas. Sci. Rep., 8.10.1038/s41598-018-22911-8 ↗
31. Tribological performances of CoCrFeNiAl high entropy alloy matrix solid-lubricating composites over a wide temperature range10.1016/j.triboint.2021.106912 ↗
32. In situ lubrication with boric acid: Powder delivery of an environmentally benign solid lubricant10.1080/05698190600639939 ↗
33. Improvement of the milling process performance by using cutting fluids prepared with nano-silver and boric acid10.1016/j.jmapro.2020.05.027 ↗
34. Thermal oxidation of Ti6Al4V alloy: Microstructural and electrochemical characterization10.1016/j.matchemphys.2009.09.007 ↗