The Tribological Properties of Plasma Electrolytic Oxidation Layers Synthesized on Arc Spray Coatings on Aluminum Alloys in Contact with Various Friction Materials
Source abstract
Abstract
Oxide layers on the surface of the aluminum alloys D16 and AMg6 and on arc coatings sprayed with electrode wires made of the alloys D16 and AMg6 were synthesized using plasma electrolytic oxidation (PEO). The microstructure, phase composition and micro-hardness of the PEO layers were studied. In addition to the two main phases (α-Al2O3 and γ-Al2O3), a small amount of a metastable crystalized Al2.427O3.64 phase was found in their structure. A comparison was made of the wear resistance and friction coefficients of the synthesized PEO layers during friction tests in pairs with other PEO layers, a galvanic chromium coating, cast iron, steels and bronze of the BrC30 type. The results of the friction tests for the various PEO layers on aluminum alloys in tribo-contact with high-hardness elements made of hardened or chrome-plated steel justify the possibility of their use in a friction pair. We experimentally showed the influence of glycerin additive in motor oil 15W30 on the change in the friction coefficient of the PEO layers synthesized on the aluminum alloys and on the arc-sprayed coatings on their surfaces in tribocouples with hardened steel.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Surface Treatment and Coatings · High-Temperature Coating Behaviors · Tribology and Wear Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Karpenko Physico-Mechanical Institute of the National Academy of Sciences of Ukraine, 5, Naukova Str., 79060 Lviv, Ukraine
Department of Mechanical, Energy and Biotechnology Engineering, Vytautas Magnus University, LT-53361 Kauno r, Lithuania
Funding
National Research Foundation of Ukraine
References (81)
Show source-provided references
1. Jiang, J., Islam, M.A., Xie, Y., and Stack, M.M. (2024). Some thoughts on modelling abrasion-corrosion: Wear by hard particles in corrosive environments. J. Bio-Tribo-Corros., 10.10.1007/s40735-023-00811-3 ↗
2. Tartakovsky, E.D., Goncharov, V.G., and Sapozhnikov, V.M. (2024, January 25). Analysis of the Effectiveness of Existing Methods of Repair 5D49 Diesel Engine Crankshafts, Available online: http://www.nbuv.gov.ua/portal/natural/Znpudazt/2009_107/n107-71.
3. Improved technologies at restoring crankshafts operational integrity for diesel vehicle destination
4. Increasing the industrial locomotives resource by improving technologies of the crankshaft engine rehabilitation
5. Wear of diesel engine inlet valves and seat inserts10.1243/0954407021529048 ↗
6. Repair welding of a rotating electrical machine’s broken shaft
7. (2024, January 25). Handbook of Reliability Prediction Procedures for Mechanical Equipment, Logistics Technology Support, Naval Surface Warfare Center (NSWC), Carderock Divizion, NSWC-11, West Bethesda, Maryland, May-2011, 20817–5700, Available online: https://extapps.ksc.nasa.gov/Reliability/Documents/HandbookofMechanicalReliability.pdf.
8. The use of trivalent chromium bath to obtain a solar selective black chromium coating10.1016/j.apsusc.2014.03.122 ↗
9. EIS study of organic coating on zinc surface pretreated with environmentally friendly products10.1016/j.porgcoat.2004.04.005 ↗
10. Electrochemical study on the corrosion resistance of Cr III-based conversion layers on zinc coatings10.1016/S0257-8972(02)00047-6 ↗
11. Chromium electrodeposition from Cr(III) aqueous solutions10.1016/j.surfcoat.2011.02.027 ↗
12. Corrosion and tribological behavior of Ni–Cr alloy coatings electrodeposited on low carbon steel in Cr (III)–Ni (II) bath10.1016/j.surfcoat.2015.10.006 ↗
13. Tribological behaviour of hard coatings deposited by arc-evaporation PVD10.1016/S0042-207X(02)00248-8 ↗
14. Effect of deposition method on tribological performance and corrosion resistance characteristics of CrxN coatings deposited by physical vapor deposition10.1016/j.tsf.2017.06.013 ↗
15. Bembenek, M., Makoviichuk, M., Shatskyi, I., Ropyak, L., Pritula, I., Gryn, L., and Belyakovskyi, V. (2022). Optical and mechanical properties of layered infrared interference filters. Sensors, 22.10.3390/s22218105 ↗
16. Laserstrahldispergieren von SiC in Aluminiumlegierungen zum partiellen Verschleißschutz
17. Selective laser melting of dispersed TiC particles strengthened 316L stainless steel10.1016/j.compositesb.2020.108291 ↗
18. Mechanical properties and corrosion behavior of selective laser melted 316L stainless steel after different heat treatment processes10.1016/j.jmst.2019.03.003 ↗
19. Analysis of the rheological behavior and stability of 316L stainless steel–TiC powder injection molding feedstock10.1016/j.msea.2005.06.057 ↗
20. Wank, A., Schmengler, C., Müller-Roden, K., Beck, F., and Schläfer, T. (2017, January 7–9). Aptitude of different types of carbides for production of durable rough surfaces by laser dispersing. Proceedings of the Thermal Spray International Thermal Spray, ITSC 2017, Düsseldorf, Germany. Paper No: itsc2017p0414.10.31399/asm.cp.itsc2017p0414 ↗
21. Student, M., Hvozdetskyi, V., Stupnytskyi, T., Student, O., Maruschak, P., Prentkovskis, O., and Skačkauskas, P. (2022). Mechanical properties of arc coatings sprayed with cored wires with different charge compositions. Coatings, 12.10.3390/coatings12070925 ↗
22. Optimization of the chromium content of powder wires of the Fe–Cr–C and Fe–Cr–B systems according to the corrosion resistance of electric-arc coatings10.1007/s11003-016-9939-8 ↗
23. Corrosion Resistance of VC–FeCr and VC–FeCrCo Coatings Obtained by Supersonic Gas-Flame Spraying10.1007/s11003-019-00214-1 ↗
24. Tribological behavior of plasma-sprayed metal based solid self-lubricating coatings under heavy load10.1016/j.wear.2021.204108 ↗
25. Influence of doping graphite on microstructure and tribological properties of plasma sprayed 3Al2O3–2SiO2 coating10.1016/j.triboint.2016.04.028 ↗
26. Microstructural characterization and tribological properties of atmospheric plasma sprayed high entropy alloy coatings10.1007/s11666-022-01422-z ↗
27. The thermodynamic and mechanical properties of Earth-abundant metal ternary boride Mo2(Fe,Mn)B2 solid solutions for impact- and wear-resistant alloys10.1039/D3MA00313B ↗
28. Improvement of wear resistance of aluminum alloy by HVOF method10.1016/j.jmrt.2020.11.102 ↗
29. Effect of connected pores on the corrosion behavior of plasma sprayed alumina coatings10.1016/S0257-8972(89)80033-7 ↗
30. Improving the aluminum drill pipes stability by optimizing the shape of protector thickening
31. Plasma-electrolytic oxidation of magnesium and its alloys: Mechanism, properties and applications10.1016/j.jma.2017.02.004 ↗
32. Optimization of plasma electrolytic oxidation technological parameters of deformed aluminum alloy D16T in flowing electrolyte10.3390/ceramics6010010 ↗
33. Design of a two-layer Al–Al2O3 coating with an oxide layer formed by the plasma electrolytic oxidation of Al for the corrosion and wear protections of steel
34. Analytical model of deformation of a functionally graded ceramic coating under local load10.3390/ceramics6030115 ↗
35. Abrasive wear/corrosion properties and TEM analysis of Al2O3 coatings fabricated using plasma electrolysis10.1016/S0257-8972(01)01453-0 ↗
36. Characterisation and wear and corrosion-resistance of microarc oxidation ceramic coatings on aluminum alloy10.1016/j.jallcom.2004.05.084 ↗
37. Plasma electrolysis for surface engineering10.1016/S0257-8972(99)00441-7 ↗
38. Hutsaylyuk, V., Student, M., Dovhunyk, V., Posuvailo, V., Student, O., Maruschak, P., and Koval’chuck, I. (2019). Effect of hydrogen on the wear resistance of steels upon contact with plasma electrolytic oxidation layers synthesized on aluminum alloys. Metals, 9.10.3390/met9030280 ↗
39. Simchen, F., Sieber, M., Kopp, A., and Lampke, T. (2020). Introduction to plasma electrolytic oxidation—An overview of the process and applications. Coatings, 10.10.3390/coatings10070628 ↗
40. Iinfluence of the composition of electrolytes on the properties of plasma-electrolytic oxide coatings on light alloys10.1007/s11003-020-00393-2 ↗
41. Gibbs energy calculation of electrolytic plasma channel with inclusions of copper and copper oxide with Al-base
42. Rodriguez, L., Paris, J.-Y., Denape, J., and Delbé, K. (2023). Micro-arcs oxidation layer formation on aluminium and coatings tribological properties—A review. Coatings, 13.10.3390/coatings13020373 ↗
43. The properties of oxide-ceramic layers with Cu and Ni inclusions synthesizing by PEO method on top of the gas-spraying coatings on aluminium alloys10.1016/j.vacuum.2020.109514 ↗
44. Tu, C., Chen, X., Liu, C., and Li, D. (2023). Plasma electrolytic oxidation coatings of a 6061 Al alloy in an electrolyte with the addition of K2ZrF6. Materials, 16.10.3390/ma16114142 ↗
45. Plasma electrolytic oxidation of cold spray kinetically metallized CNT-Al coating on AZ91-Mg alloy: Evaluation of mechanical and surficial characteristics10.1016/j.jallcom.2021.162094 ↗
46. Abrasion, sliding wear, corrosion, and cavitation erosion characteristics of a duplex coating formed on AZ31 Mg alloy by sequential application of cold spray and plasma electrolytic oxidation techniques10.1016/j.mtcomm.2020.101978 ↗
47. Duplex surface treatment of metallic alloys combining cold-spray and plasma electrolytic oxidation technologies10.1016/j.surfcoat.2020.125756 ↗
48. A new strategy to prepare alumina-zirconia composite or multilayered coatings by combining cold-spray deposition and plasma electrolytic oxidation10.1016/j.mtcomm.2023.106676 ↗
49. The unique abilities of cold spray deposition10.1080/09506608.2016.1194948 ↗
50. Cold spray coating: Review of material systems and future perspectives10.1179/1743294414Y.0000000270 ↗
51. Ralls, A., Gillespy, R., Menezes, P.V., and Men, P.L. (2023). Unraveling electrochemical mechanisms in plasma electrolytic oxidation of cold spray additively manufactured stainless steel. J. Mater. Eng. Perform., 1–19.10.1007/s11665-023-08960-9 ↗
52. Deposition of duplex Al2O3/aluminum coatings on steel using a combined technique of arc spraying and plasma electrolytic oxidation10.1016/j.apsusc.2005.04.036 ↗
53. Structure and mechanical properties of ceramic coatings fabricated by plasma electrolytic oxidation on aluminized steel10.1016/j.apsusc.2007.04.007 ↗
54. Modification of the surfaces of aluminum and titanium alloys aimed at the improvement of their wear resistance and tribological characteristics10.1007/s11003-021-00552-z ↗
55. Forming characteristics and mechanisms of micro-arc oxidation coatings on magnesium alloys based on different types of single electrolyte solutions10.1016/j.ceramint.2023.07.202 ↗
56. Formation and characterization of wear-resistant PEO coatings formed on β-titanium alloy at different electrolyte temperatures10.1016/j.apsusc.2012.07.104 ↗
57. Kostelac, L., Pezzato, L., Colusso, E., Natile, M.M., Brunelli, K., and Dabalà, M. (2023). Black PEO coatings on titanium and titanium alloys produced at low current densities. Appl. Sci., 13.10.3390/app132212280 ↗
58. Study of the properties of qxide coatings formed on titanium by plasma electrolytic oxidation method10.18321/ectj930 ↗
59. Characterization of AC PEO coatings on magnesium alloys10.1016/j.surfcoat.2009.02.011 ↗
60. Corrosion resistance and wear resistance of plasma electrolytic oxidation coatings on metal matrix composites10.1016/j.surfcoat.2006.07.126 ↗
61. Corrosion inhibition of aluminum 6061 alloy by a micro arc oxidation modified with incorporated zinc oxide nanoparticles10.1063/5.0157427 ↗
62. Dry sliding wear of MAO-coated A356/20 vol.% SiCp composites in the temperature range 25–180 °C10.1016/j.wear.2007.01.044 ↗
63. Plasma electrolytic oxidation coatings with particle additions—A review10.1016/j.surfcoat.2016.08.055 ↗
64. Anti-corrosion microarc oxidation coatings on SiCP AZ31 magnesium matrix composite10.1016/j.jallcom.2009.03.159 ↗
65. Corrosion and wear of PEO coated AZ91/SiC composites10.1016/j.surfcoat.2016.10.041 ↗
66. Investigation of the growth processes of coatings formed by AC plasma electrolytic oxidation of aluminium10.1016/j.electacta.2009.06.088 ↗
67. Corrosion properties of plasma electrolytic oxidation coatings on an aluminium alloy—The effect of the PEO process stage10.1016/j.matchemphys.2015.04.058 ↗
68. Influence of sealing post-treatments on the corrosion resistance of PEO coated AZ91 magnesium alloy10.1016/j.apsusc.2017.10.083 ↗
69. Increasing thickness and protective properties of PEO-coatings on aluminum alloy10.1016/j.surfcoat.2017.11.025 ↗
70. The effect of increasing the air flow pressure on the properties of coatings during the arc spraying of cored wires10.2478/scjme-2019-0048 ↗
71. Gurvich, L.V., Veyts, I.V., Medvedev, V.A., Khachkuruzov, G.A., Yungman, V.S., Bergman, G.A., Baybuz, V.F., Iorish, V.S., Yurkov, G.N., and Gorbov, S.I. (1989). Thermodynamic Properties of Individual Substances, Hemisphere Publishing Corp.. Part 2.
72. Quantitative phase analysis using the Rietveld method: Towards a procedure for checking the reliability and quality of the results
73. Methods of crystallography: Powder X-ray diffraction
74. Quantitative phase analysis using the Rietveld method10.1107/S0021889887009415 ↗
75. Diffusion and mass transfer mechanisms during frictional selective transfer10.1016/j.ijheatmasstransfer.2017.09.083 ↗
76. Preparation of a thick sponge-like structured amorphous silica ceramic coating on 6061 aluminum alloy by plasma electrolytic oxidation in TEOS solution10.1016/j.ceramint.2023.07.236 ↗
77. Influence of temperature on tribological properties of microarc oxidation coating on 7075 aluminium alloy at 25 °C–300 °C10.1016/j.ceramint.2019.03.146 ↗
78. PEO-Chameleon as a potential protective coating on cast aluminum alloys for high-temperature applications10.1016/j.surfcoat.2020.126016 ↗
79. Quality Analysis of Aluminized Surface Layers Produced by Electrospark Deposition10.1007/s11106-018-9944-6 ↗
80. Plasma spraying Ti–Al–C based composite coatings from Ti/Al/graphite agglomerates: Synthesis, characterization and reaction mechanism10.1016/j.vacuum.2022.111036 ↗
81. Rukanskis, M., Padgurskas, J., Mihailov, V., Rukuiža, R., Žunda, A., Baltakys, K., and Tuckute, S. (2023). Investigation of the Lubricated Tribo-System of Modified Electrospark Coatings. Coatings, 13.10.3390/coatings13050825 ↗