Heat-Resistant Protective Coatings Applied to Aircraft Turbine Blades by Supersonic Thermal Spraying and Diffusion-Aluminizing

Aircraft engine turbine blades are covered with protective coatings. These coatings should have the best thermophysical convergence with the blade’s parent material. The aim is to create heat-resistant covering for aircraft engine turbine blades made of nickel superalloy. The results of tests on coatings are presented; the inner layer is an adhesive layer of the MeCrAlY type, applied to the blade by means of supersonic thermal spraying, and the outer layer is diffusion-aluminized in the first case using the Vapor Phase Aluminizing method, and in the second using the suspension method. The inner layer of the coating protects the blade material against high-temperature corrosion, and the outer layer against high-temperature fuel combustion product stream. The protective coatings applied to aircraft engine turbine blades were subjected to an engine test in test bench conditions and then to material tests. A protective coating with an internal layer of MeCrAlY type applied to the blade by supersonic spraying and an external layer aluminized by the Vapor Phase Aluminizing method protects the nickel superalloy against high-temperature diffusion changes, protects it against oxidation and provides it thermal insulation.