Research Progress on Environmental Corrosion Resistance of Thermal Barrier Coatings: A Review
Source abstract
Abstract
With the development of marine science and technology, marine construction is entering a new period of modern ocean development and utilization. The scale of marine development is expanding constantly. The lifespan of aircraft engines faces new challenges in marine environments. This paper reviews recent progress in the development of high-temperature coatings for aero-engines designed to resist marine atmospheric corrosion, with a focus on corrosion mechanisms, detection technologies, current research on marine atmospheric corrosion, standards for evaluating coating resistance, and novel advancements in coating materials.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Corrosion Behavior and Inhibition · Magnesium Oxide Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Materials Science and Engineering, Xiangtan University, Xiangtan 411105, China
Funding
Science and Technology Project of the Education Department of Hunan Province · Postgraduate Scientific Research Innovation Project of Hunan Province
References (100+)
Show source-provided references
1. Thermal barrier coatings for enhanced efficiency of gas turbine engines10.1016/j.surfcoat.2006.06.026 ↗
2. Ceramic materials for thermal barrier coatings10.1016/S0955-2219(03)00129-8 ↗
3. Exergoeconomic, sustainability and environmental damage cost analyses of T56 turboprop engine10.1016/j.energy.2013.09.066 ↗
4. Low-cycle fatigue behavior of a directionally solidified Ni-based superalloy subjected to gas hot corrosion pre-exposure10.1007/s12598-016-0862-9 ↗
5. Heat transfer, thermal stress and failure analyses in a TiB2 gas turbine stator blade10.1016/j.ceramint.2019.06.184 ↗
6. An analytical model for simulation of heat flow in plasma-sprayed thermal barrier coatings10.1361/10599630523764 ↗
7. Rajabinezhad, M., Bahrami, A., Mousavinia, M., Seyedi, S.J., and Taheri, P. (2020). Corrosion-fatigue failure of gas-turbine blades in an oil and gas production plant. Materials, 13.10.3390/ma13040900 ↗
8. Premature Damage of the Second Stage Nozzle Guide Vanes of a Gas Turbine Made of INCONEL 738LC10.1016/j.engfailanal.2019.07.053 ↗
9. Development of a new TBC system for more efficient gas turbine engine application10.1016/j.matpr.2016.06.019 ↗
10. Influence of yttria on the cyclic lifetime of YSZ TBC deposited on EB-PVD NiCoCrAlY bondcoats and its contribution to a modified TBC adhesion mechanism10.1016/j.surfcoat.2013.07.022 ↗
11. Inverse design method on scramjet nozzles based on maximum thrust theory10.1016/j.actaastro.2019.10.024 ↗
12. Directions of the development of thermal barrier coatings in energy applications
13. Combustor technology of high temperature rise for aero engine10.1016/j.paerosci.2023.100927 ↗
14. Thermal barrier coatings for aircraft engines: History and directions10.1007/BF02646310 ↗
15. Thermal barrier coating experience in gas turbine engines at Pratt & Whitney10.1007/BF02646318 ↗
16. Thermal conductivity of dense and porous yttria-stabilized zirconia10.1023/A:1017970924312 ↗
17. Chemical synthesis and structural characterization of nanocrystalline powders of pure zirconia and yttria stabilized zirconia (YSZ)10.1016/S0955-2219(99)00293-9 ↗
18. Solution combustion synthesis of calcia-magnesia-aluminosilicate powder and its interaction with yttria-stabilized zirconia and co-doped yttria-stabilized zirconia10.1016/j.ceramint.2019.06.036 ↗
19. Heat treatment induced phase transformations in zirconia and yttria-stabilized zirconia monolithic aerogels10.1016/j.supflu.2019.02.011 ↗
20. Atomic force microscopy study of the tetragonal to monoclinic transformation behavior of silica doped yttria-stabilized zirconia10.1007/s10853-005-2550-2 ↗
21. The effect of high strain rate impact in Yttria stabilized zirconia10.1016/j.matdes.2023.111908 ↗
22. Advances in oxidation and ablation resistance of high and ultra-high temperature ceramics modified or coated carbon/carbon composites10.1016/j.jeurceramsoc.2017.08.013 ↗
23. The fabrication and performance of C/C composites impregnated with TaC filler10.1016/j.carbon.2016.12.019 ↗
24. Ablation behaviour of C/C and C/C–ZrC–SiC composites with cone-shaped holes under an oxyacetylene flame10.1016/j.corsci.2015.09.022 ↗
25. Three-dimensional graphene-reinforced Cu foam interlayer for brazing C/C composites and Nb10.1016/j.carbon.2017.03.099 ↗
26. Ablation resistance of HfC coating reinforced by HfC nanowires in cyclic ablation environment10.1016/j.jeurceramsoc.2017.02.057 ↗
27. Improving the oxidation resistance under thermal shock condition of SiC-coated C/C composites with refined SiC grain size using ferrocene10.1016/j.surfcoat.2017.03.019 ↗
28. In situ synthesis of SiC nanowire porous layer on carbon/carbon composites10.1111/jace.15296 ↗
29. Knudsen cell studies of the reactions of N2O5 and ClONO2 with NaCl: Development and application of a model for estimating available surface areas and corrected uptake coefficients10.1039/b301126g ↗
30. Study on corrosion mechanism of Al–Zn coatings in the simulated polluted marine atmosphere10.1016/j.jmrt.2023.07.091 ↗
31. Unraveling the effect of chloride ion on the corrosion product film of Cr-Ni-containing steel in tropical marine atmospheric environment10.1016/j.corsci.2022.110741 ↗
32. Corrosion behaviour of aluminide coatings on Ti-based alloy in the marine environment at high temperature10.1016/j.corsci.2022.110750 ↗
33. Heterogeneous oxidation of sulfur dioxide by ozone on the surface of sodium chloride and its mixtures with other components10.1029/2006JD008207 ↗
34. Atmospheric corrosion of ZnAlMg coated steel during long term atmospheric weathering at different worldwide exposure sites10.1016/j.corsci.2018.12.033 ↗
35. A modeling study of the influence of sea salt on inorganic aerosol concentration, size distribution, and deposition in the western Pacific Ocean10.1016/j.atmosenv.2018.06.030 ↗
36. Simoneau, R., and Hudson, D. CFD in the context of IHPTET—The Integrated High Performance Turbine Engine Technology Program. Proceedings of the 25th Joint Propulsion Conference, Monterey, CA, USA.
37. Composite ceramics thermal barrier coatings of yttria stabilized zirconia for aero-engines10.1016/j.jmst.2019.08.003 ↗
38. Deposition mechanisms of yttria-stabilized zirconia coatings during plasma spray physical vapor deposition10.1016/j.ceramint.2015.12.111 ↗
39. Hu, N., Khan, M., Wang, Y., Song, X., Lin, C., Chang, C., and Zeng, Y. (2017). Effect of microstructure on the thermal conductivity of plasma sprayed Y2O3 stabilized zirconia (8% YSZ). Coatings, 7.10.20944/preprints201709.0095.v1 ↗
40. Research of in situ modified PS-PVD thermal barrier coating against CMAS (CaO–MgO–Al2O3–SiO2) corrosion10.1016/j.ceramint.2015.10.106 ↗
41. Analytical and numerical investigations of the crack behavior in thermal barrier coatings under the trip thermal load10.1016/j.surfcoat.2018.01.010 ↗
42. A novel strategy to control the microstructure of plasma-sprayed YSZ thermal barrier coatings10.1016/j.surfcoat.2020.126304 ↗
43. Failure behaviour of EB-PVD YSZ thermal barrier coatings under simulated aero-engine operating conditions10.1016/j.surfcoat.2023.130027 ↗
44. Effect of microstructure on CMAS corrosion behavior of (Gd0.8Yb0.2)2Zr2O7/YSZ thermal barrier coatings prepared by EB-PVD10.1016/j.corsci.2023.111477 ↗
45. The influence of chromium content on wear and corrosion behavior of surface alloyed steel with Fe (16− x)Crx(B, C)4 electrode
46. Development of Surface Properties with In Situ TiB2 Intermetallic-Assisted Coating by Fe(18-X)Ti2BX (x= 3, 4, 5)-Based Electrodes
47. Processing and design methodologies for advanced and novel thermal barrier coatings for engineering applications10.1016/j.partic.2016.01.007 ↗
48. Acoustic emission source analysis of plasma sprayed thermal barrier coatings during four-point bend tests10.1016/S0257-8972(01)00995-1 ↗
49. Thermal shock resistances of nanostructured and conventional zirconia coatings deposited by atmospheric plasma spraying10.1016/j.surfcoat.2004.08.225 ↗
50. Porous APS YSZ TBC manufactured at high powder feed rate (100 g/min) and deposition efficiency (70%): Microstructure, bond strength and thermal gradients10.1007/s11666-021-01302-y ↗
51. Microstructural characterization and room-temperature erosion behavior of as-deposited SPS, EB-PVD and APS YSZ-based TBCs10.1007/s11666-018-0763-6 ↗
52. Sintering resistance of suspension plasma sprayed 7YSZ TBC under isothermal and cyclic oxidation10.1016/j.jeurceramsoc.2019.12.046 ↗
53. Control of the mesostructure of suspension plasma-sprayed coating with laser surface texturing: Application to TBC10.1007/s11666-019-00835-7 ↗
54. Understanding the effect of material composition and microstructural design on the erosion behavior of plasma sprayed thermal barrier coatings10.1016/j.apsusc.2019.05.245 ↗
55. Review on advanced EB-PVD ceramic topcoats for TBC applications10.1111/j.1744-7402.2004.tb00182.x ↗
56. Preparation of thermal barrier coatings for gas turbine blades by EB-PVD10.1016/S0040-6090(98)01124-9 ↗
57. High temperature oxidation of EB-PVD TBCs on Pt-diffused single crystal Ni superalloy10.1016/j.surfcoat.2014.07.096 ↗
58. Effect of the microstructure of EB-PVD thermal barrier coatings on the thermal conductivity and the methods to reduce the thermal conductivity
59. PVD coatings for aircraft turbine blades
60. Thermally sprayed coating systems for surface protection and clearance control applications in aero engines
61. Columnar-structured thermal barrier coatings (TBCs) by thin film low-pressure plasma spraying (LPPS-TF)10.1007/s11666-010-9549-1 ↗
62. The thermal cycling behavior of Lanthanum–Cerium Oxide thermal barrier coating prepared by EB–PVD10.1016/j.surfcoat.2005.05.033 ↗
63. Improvement of EB-PVD thermal barrier coatings by treatments of a vacuum plasma-sprayed bond coat10.1016/j.surfcoat.2008.08.071 ↗
64. Methods to reduce the thermal conductivity of EB-PVD TBCs10.1016/S0257-8972(01)01651-6 ↗
65. Plasma spray-PVD: A new thermal spray process to deposit out of the vapor phase10.1007/s11666-011-9654-9 ↗
66. Investigation of the resistance of open-column-structured PS-PVD TBCs to erosive and high-temperature corrosive attack10.1016/j.surfcoat.2017.05.003 ↗
67. Effects of laser glazing on CMAS corrosion behavior of Y2O3 stabilized ZrO2 thermal barrier coatings10.1016/j.corsci.2019.06.025 ↗
68. Microstructure, thermal conductivity and thermal cycling behavior of thermal barrier coatings prepared by plasma spray physical vapor deposition10.1016/j.surfcoat.2015.06.033 ↗
69. Insights into the primitives and sequence deposition mechanism of 7YSZ TBCs respectively by EB-PVD and PS-PVD10.1016/j.surfcoat.2023.129673 ↗
70. Investigation on growth mechanisms of columnar structured YSZ coatings in Plasma Spray-Physical Vapor Deposition (PS-PVD)10.1016/j.jeurceramsoc.2019.04.003 ↗
71. Modelling the EB-PVD thermal barrier coating process: Component clusters and shadow masks10.1016/j.surfcoat.2016.12.054 ↗
72. Thermal barrier coatings technology: Critical review, progress update, remaining challenges and prospects10.1179/1743280413Y.0000000019 ↗
73. Phase distributions in plasma-sprayed zirconia-yttria
74. Empirical interatomic potentials for ZrO2 and YSZ polymorphs: Application to a tetragonal ZrO2 grain boundary10.1016/j.actamat.2023.119460 ↗
75. Thermal properties and phase stability of Yttria-Stabilized Zirconia (YSZ) coating deposited by Air Plasma Spray onto a Ni-base superalloy10.1016/j.ceramint.2017.11.109 ↗
76. Effect of yttria content on the zirconia unit cell parameters10.1111/j.1551-2916.2011.04862.x ↗
77. Phase equilibria and non-transformable tetragonal zirconia in ZrO2-RETaO4 systems and their stabilization mechanism: Experiments and calculations10.1016/j.ceramint.2023.01.193 ↗
78. Phase stability of t′-zirconia-based thermal barrier coatings: Mechanistic insights10.1111/j.1551-2916.2011.04531.x ↗
79. In situ diffraction study of the high-temperature decomposition of t′-zirconia10.1111/jace.13249 ↗
80. Mechanical properties of high-temperature-degraded yttria-stabilized zirconia10.1016/j.actamat.2014.01.017 ↗
81. Effects of isothermal oxidation on microstructure and mechanical properties of thermal barrier coatings10.1016/j.ceramint.2019.01.208 ↗
82. High temperature aging of YSZ coatings and subsequent transformation at low temperature10.1016/j.surfcoat.2005.07.089 ↗
83. Phase transformation behavior in air plasma sprayed yttria stabilized zirconia coating10.1016/j.jallcom.2018.03.011 ↗
84. Structure Characterization calculation of Tetragonal Zirconia10.1088/1757-899X/18/20/202008 ↗
85. A highly porous thermal barrier coating based on Gd2O3–Yb2O3 co-doped YSZ10.1016/j.surfcoat.2019.03.064 ↗
86. Microstructure and thermal properties of nanostructured gadolinia doped yttria-stabilized zirconia thermal barrier coatings produced by air plasma spraying10.1016/j.ceramint.2016.05.084 ↗
87. Effect of Cr2O3-TiO2 Addition on the Physical Properties of Zirconia Toughened Alumina10.4028/www.scientific.net/MSF.840.34 ↗
88. Effect of La2O3 addition on the microstructure, hardness and abrasive wear behavior of flame sprayed Ni based coatings10.1016/j.wear.2008.12.029 ↗
89. Co-Doping of Air Plasma-Sprayed Yttria-and Ceria-Stabilized Zirconia for Thermal Barrier Applications10.1111/j.1551-2916.2005.00296.x ↗
90. High temperature mechanical properties of zirconia metastable t′-Phase degraded yttria stabilized zirconia10.1016/j.ceramint.2019.05.297 ↗
91. Direct observations of erosion-induced ferroelasticity in EB-PVD thermal barrier coatings10.1007/s10853-015-9623-7 ↗
92. Thermal barrier coatings for gas-turbine engine applications10.1126/science.1068609 ↗
93. Hot corrosion behavior of Co modified NiAl coating on nickel base superalloys10.1016/j.corsci.2012.06.027 ↗
94. Failure and life evaluation of EB-PVD thermal barrier coatings using temperature-process-dependent model parameters10.1016/j.corsci.2019.04.020 ↗
95. Spallation of thermal barrier coatings with real thermally grown oxide morphology under thermal stress10.1016/j.matdes.2018.03.019 ↗
96. Damage progression in thermal barrier coating systems during thermal cycling: A nano-mechanical assessment10.1016/j.matdes.2019.107615 ↗
97. Turbine airfoil degradation in the persian gulf war10.1007/BF03222663 ↗
98. A delamination mechanism for thermal barrier coatings subject to calcium–magnesium–alumino-silicate (CMAS) infiltration10.1016/j.actamat.2004.11.028 ↗
99. CMAS penetration-induced cracking behavior in the ceramic top coat of APS TBCs10.1016/j.ceramint.2019.04.152 ↗
100. Degradation mechanisms of air plasma sprayed free-standing yttria-stabilized zirconia thermal barrier coatings exposed to volcanic ash10.1016/j.apsusc.2019.03.084 ↗