In Situ Fabrication of Ti-xNb Alloys by Conventional Powder Metallurgy

The present study shows the effect of Nb on a Ti matrix to fabricate composites via the conventional powder metallurgy for medical applications. Ti powder mixture compacts with different Nb contents were obtained from the conventional pressing and sintering technique. The sintering behavior was evaluated using the dilatometry technique, and the microstructure was studied using scanning electron microscopy (SEM) and X-ray diffraction (XDR). The mechanical properties were obtained from simple compression tests, and the corrosion resistance was determined from a standard three-electrode arrangement in Hank’s solution. The results showed that the Nb in the Ti matrix limits the evolution of sintering depending on the Nb content. Nb slightly accelerates the phase transition temperature. The microstructure and X-rays revealed that biphasic α + β-Ti structures can be obtained, in addition to retaining the β-Ti phase and forming the martensitic phases α′ and α″ of Ti. Likewise, the mechanical behavior showed a Young’s modulus of 10–45 GPa, which is close to that reported for human bones. Furthermore, the circuit analysis revealed that the Ti-Nb sintered systems were conditioned by the surface oxide layer and that the oxide layer formed within the residual pores of the sintering process. Finally, it was demonstrated that adding Nb to the Ti matrix increases the corrosion resistance and that contents close to 15 wt.% of this element have the best results.