Study of the Adsorption of Anionic Surfactants on Carbonate Rocks: Characterizations, Experimental Design, and Parameter Implementation

Controlling or reducing the adsorption of surfactants on reservoir rock surfaces has been a challenging task in enhanced oil recovery (EOR) methods, as it directly affects the cost-effectiveness of the projects. The adsorption of surfactants on rock surfaces can modify their hydrophobicity, surface charge, and other important parameters that govern EOR processes, such as reducing the interfacial tension between water and oil and increasing permeability. Therefore, understanding the adsorption mechanism on rocks is essential for developing alternatives that improve the effectiveness of these processes. In this work, the adsorption of surfactants on carbonate materials was evaluated considering variations in temperature, contact time, and surfactant concentration. The surfactants used were derived from vegetable oils, aiming for a sustainable approach: saponified coconut oil (SCO), saponified babassu coconut oil (SBCO), and saponified castor oil (SMO). The finite bath method was used, resulting in adsorption efficiencies of 85.74%, 82.52%, and 45.30% for SCO, SBCO, and SMO, respectively. The Sips isotherm and the pseudo-second-order model were found to be suitable for characterizing these systems. The simulation of SCO adsorption isotherms on limestone by the Langmuir model was more accurate than that using the Freundlich model. The limestone showed a negative surface charge of approximately −35.0 mV at pH 6.5; this negative charge varied over a wide pH range. These zeta potential data for the samples confirmed that hydrophobic interactions played an important role in the adsorption of the surfactants. Thermodynamic evaluation indicated spontaneous and endothermic adsorption of SCO on limestone. The systems were also characterized by FTIR, TG/DTG, XRD, XRF, SEM, and zeta potential.