UV-Curable Fluorocarbon Polyurethane Coatings for Marble Kitchen Countertops

Marble kitchen countertops and other natural stone surfaces are often stained by various food ingredients and contaminants during daily use and require frequent cleaning, which is time-consuming and leads to the wasting of water. If the surface is coated with a hydrophobic and oleophobic coating, food ingredient contamination becomes easier to wipe clean. Therefore, a UV-curable monomer with fluorocarbon branched chains was synthesized and added to UV-curable coatings in different ratios. The preferred formulation that meets the basic performance requirements of UV-curable coatings, and has the best hydrophobic and oleophobic properties, was designed and selected. The formulation was upgraded by adding a hydrofluoric ether (HFE) solvent. These upgraded formulations were tested for hydrophobicity and oleophobicity under various conditions. The addition of an HFE solvent improves the initial water and cetane contact angles of the paint film, as well as the water and cetane contact angles under various conditions. Moreover, the upgraded formulations have better stain resistance. The degree of hydrophobicity and oleophobicity improvement is positively correlated with the addition of an HFE solvent. The UV-curable fluorocarbon polyurethane coating has good adhesion on a marble surface that has been polished and primed. Due to the presence of TEOH-6 instead of PFOA, the low content of fluorocarbon functional groups effectively located on the film surface makes the coating quite stable and safe.