Design and Analysis of a 5-Degree of Freedom (DOF) Hybrid Three-Nozzle 3D Printer for Wood Fiber Gel Material
Source abstract
Abstract
Wood is an organic renewable natural resource. Cellulose, hemicellulose and lignin in wood are used in tissue engineering, biomedicine and other fields because of their good properties. This paper reported that the possibility of wood fiber gel material molding and the preparing of gel material were researched based on the wood fiber gel material as a 3D printing material. A five-degree of freedom hybrid three nozzle 3D printer was designed. The structural analysis, static analysis, modal analysis and transient dynamic analysis of 3D printers were researched, and the theoretical basis of the 3D printer was confirmed as correct and structurally sound. The results showed that the 5-DOF hybrid 3-nozzle 3D printer achieved the 3D printing of wood fiber gel material and that the printer is capable of multi-material printing and multi-degree-of-freedom printing.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · biodegradable polymer synthesis and properties · Electrospun Nanofibers in Biomedical Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Mechanical and Transportation, Southwest Forestry University, Kunming 650224, China
School of Material Science and Engineering, Southwest Forestry University, Kunming 650224, China
Funding
National Natural Science Foundation of China · Scientific Research Fund Project of Yunnan Provincial Education Department
References (28)
Show source-provided references
1. Recent advances in 3D printing technologies for wearable (bio)sensors
2. Additive manufacturing technology—Surrent status and future
3. Development and application trends of 3D printers
4. Liu, Y.X., and Zhao, G.J. (2012). Wood Science, China Forestry Press. (In Chinese).
5. Wang, Q., Ji, C., Sun, L., Sun, J., and Liu, J. (2020). Cellulose Nanofibrils Filled Poly(Lactic Acid) Bio composite Filament for FDM 3D Printing. Molecules, 25.10.3390/molecules25102319 ↗
6. MXene-Reinforced Cellulose Nano fibril Inks for 3D-Printed Smart Fibers and Textiles10.1002/adfm.201905898 ↗
7. A new photoelectric ink based on nanocellulose/CdS quantum dots for screen-printing10.1016/j.carbpol.2016.04.034 ↗
8. Three dimensional ink-jet printing of biomaterials using ionic liquids and co-solvents10.1039/C5FD00219B ↗
9. Cellulose, hemicellulose, lignin, and thei r derivatives as multi-components of bio-based feedstocks for 3D printing10.1016/j.carbpol.2020.116881 ↗
10. Surface Engineered Biomimetic Inks Based on UV Cross-Linkable Wood Biopolymers for 3D Printing10.1021/acsami.9b03442 ↗
11. Biomimetic Inks Based on Cellulose Nano fibrils and Cross-Linkable Xylans for 3D Printing10.1021/acsami.7b13400 ↗
12. Yes, we can make money out of lignin and other bio-based resources
13. 3D printing of lignin: Challenges, opportunities and roads onward10.1002/bip.23431 ↗
14. Hong, S.H., Park, J.H., Kim, O.Y., and Hwang, S.H. (2021). Preparation of Chemically Modified Lignin-Reinforced PLA Bio composites and Their 3D Printing Performance. Polymers, 13.10.3390/polym13040667 ↗
15. Current status and research ideas of cellulose materials in 3D printing
16. Laser-cured cellulose gel for 3D printing
17. 3D Printing of Cellulose Nanocrystal-Loaded Hydrogels through Rapid Fixation by Photopolymerization10.1021/acs.langmuir.1c00553 ↗
18. Separation, characterization and hydrogel-formation of hemicellulose from aspen wood10.1016/S0144-8617(00)00181-8 ↗
19. 3D Printing of Hemicellulosic Biopolymers Extracted from Lignocellulosic Agricultural Wastes10.1021/acsapm.0c00256 ↗
20. Biocompatible hydrogels of chitosan-alkali lignin for potential wound healing applications10.1016/j.msec.2019.04.038 ↗
21. Design and analysis of FDM-type multi-jet 3D printers
22. Effect of KH550 modification on the properties of micro-nano-cellulose/PLA composite 3D printing materials
23. 3D printing of multi-scalable structures via high penetration near-infrared photopolymerization10.1038/s41467-020-17251-z ↗
24. Rotational 3D printing of damage-tolerant composites with programmable mechanics10.1073/pnas.1715157115 ↗
25. Ink direct writing additive manufacturing technology and its research progress in the field of energy-containing materials
26. Research progress of multi-degree-of-freedom 3D printing technology
27. Structure design of free switching multi-color 3D printing with three nozzles
28. Effect of moving mass velocity on the dynamic deflection response of simply supported beams