Study on Microstructure and Properties of AlCoCrFeNi High-Entropy Alloys by Extreme High-Speed Laser Cladding
Source abstract
Abstract
AlCoCrFeNi HEA powders were cladded onto AISI 1045 steel using EHLA and CLA, respectively. The phase composition, microstructure, micro/nanohardness, and corrosion resistance of the two coatings were compared and analyzed. The results show that the phase structure of AlCoCrFeNi HEA coatings prepared by EHLA and CLA was that of a BCC/B2 phase solid solution. From the bottom to the top, the EHLA-derived AlCoCrFeNi HEA coating experienced evolution in the microstructure of plane crystal, dendrite, and equiaxed crystal. The micro/nanohardness of EHLA-derived coating (~507 HV0.2, 6.716 GPa) is higher than that of CLA-derived coating (~429 HV0.2, 5.778 GPa). The electrochemical test results show that the Ecorr of CLA is −0.527 V and the Icorr of CLA is 1.272 × 10−7 A/cm2, while the Ecorr of EHLA is −0.454 V and the Icorr of EHLA is 1.588 × 10−8 A/cm2, which means that the corrosion resistance of EHLA is better.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Materials Science and Engineering, Nanchang Hangkong University, Nanchang 330063, China
Jiangxi Changhe Aviation Industries Co., Ltd., Jingdezhen 333002, China
College of Chemistry and Materials Engineering, Zhejiang A&F University, Hangzhou 311300, China
Funding
National Natural Science Foundation of China · Jiangxi Provincial Science Fund for Distinguished Young Scholars · Key Research and Development Program of Jiangxi province, China
References (44)
Show source-provided references
1. A review on laser cladding of high-entropy alloys, their recent trends and potential applications10.1016/j.jmapro.2021.06.041 ↗
2. Microstructure and tribological behavior of CoCrFeNiMo0.2/SiC high-entropy alloy gradient composite coating prepared by laser cladding10.1016/j.surfcoat.2023.129681 ↗
3. Corrosion and aging of organic aviation coatings: A review10.1016/j.cja.2023.04.016 ↗
4. Influence of laser shock peening on surface integrity and tensile property of high strength low alloy steel10.1016/j.cja.2020.09.004 ↗
5. Research progress of marine anti-corrosion and wear-resistant coating10.1016/j.triboint.2024.109864 ↗
6. Comparative study on the corrosion behavior of two arc spraying coatings in simulated marine environments10.1016/j.surfcoat.2024.130945 ↗
7. Development of CoCr0.65FeNi-BSiC as a self-fluxing high-entropy alloy for thermal spraying10.1016/j.surfcoat.2023.130259 ↗
8. Laser cladding of electroplated Ni-WC on surface of TA2: Microstructure and mechanical properties10.1016/j.jallcom.2023.171715 ↗
9. Recent research and development status of laser cladding: A review10.1016/j.optlastec.2021.106915 ↗
10. Research status and prospect of extreme high-speed laser cladding technology10.1016/j.optlastec.2023.109800 ↗
11. EHLA: Extreme High-Speed Laser Material Deposition10.1002/latj.201700020 ↗
12. Comparison of CoCrFeNi coatings prepared via high-speed laser cladding and normal laser cladding on microstructure and properties10.1016/j.intermet.2022.107795 ↗
13. Investigations on ultra-high-speed laser material deposition as alternative for hard chrome plating and thermal spraying10.2351/1.4943910 ↗
14. Nanostructured High-Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and Outcomes10.1002/adem.200300567 ↗
15. Microstructure evolution and solidification mechanism of CoCrFeNiMoNb high entropy alloy coating by laser cladding10.1016/j.intermet.2024.108345 ↗
16. Rapid preparation of nanocrystalline high-entropy alloy coating with extremely low dilution rate and excellent corrosion resistance via ultra-high-speed laser cladding10.1016/j.intermet.2024.108346 ↗
17. Microstructure and properties analysis of AlCoCrFeNi high-entropy alloy/iron-based amorphous composite coatings prepared by laser cladding10.1016/j.jnoncrysol.2023.122732 ↗
18. Microstructure evolution and characteristics of laser cladding with pre-placed powder lightweight refractory NbxMo0.5Ti1.5Ta0.2Cr high-entropy alloy10.1016/j.intermet.2024.108229 ↗
19. Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys10.1063/1.3587228 ↗
20. Effect of Mo addition on microstructure and wear resistance of laser clad AlCoCrFeNi-TiC composite coatings10.1016/j.apsusc.2023.157071 ↗
21. Enhanced wear and corrosion resistances of AlCoCrFeNi high-entropy alloy coatings via high-speed laser cladding10.1016/j.mtcomm.2022.104417 ↗
22. Microstructure and wear resistance of AlCoCrFeNi-WC/TiC composite coating by laser cladding10.1016/j.matchar.2022.112479 ↗
23. Effects of W element on the microstructure, wear and cavitation erosion behavior of CoCrFeNiMnWx high entropy alloy coatings by laser cladding10.1016/j.matchemphys.2024.129630 ↗
24. Design and characterization on microstructure evolution and properties of laser-cladding Ni1.5CrFeTi2B0.5Mox high-entropy alloy coatings10.1016/j.surfcoat.2020.126793 ↗
25. Evolution in microstructure, wear, corrosion, and tribocorrosion behavior of Mo-containing high-entropy alloy coatings fabricated by laser cladding10.1016/j.corsci.2021.109727 ↗
26. Effect of surface morphology and microstructure on the hot corrosion behavior of TiC/IN625 coatings prepared by extreme high-speed laser cladding10.1016/j.corsci.2022.110271 ↗
27. Comparison of the microstructure and properties of 19Al–24Cr–19Ti–37Ni–1Y high-entropy alloy fabricated through conventional and ultrahigh-speed laser cladding methods10.1016/j.apsusc.2024.160618 ↗
28. Mass, Momentum, and Energy Transport in a Molten Pool When Welding Dissimilar Metals10.1115/1.2825999 ↗
29. Development mechanism and solidification morphology of molten pool generated by laser cladding10.1016/j.ijthermalsci.2020.106579 ↗
30. Understanding Stellite-6 coating prepared by laser cladding: Convection and columnar-to-equiaxed transition10.1016/j.optlastec.2022.107885 ↗
31. Comparative studies on microstructural characteristics and wear behavior of high-speed and low-speed laser cladding graphene/CoCrFeMo0.5NiTi0.5 high-entropy alloy composite layers10.1016/j.mtcomm.2024.108970 ↗
32. Effects of scanning speed on the microstructure, hardness and corrosion properties of high-speed laser cladding Fe-based stainless coatings10.1016/j.jmrt.2024.02.087 ↗
33. Enhanced hot corrosion resistance of AlCoCrFeNi2.1 high entropy alloy coatings by extreme high-speed laser cladding10.1016/j.corsci.2024.112486 ↗
34. A comparative study on microstructure and properties of traditional laser cladding and high-speed laser cladding of Ni45 alloy coatings10.1016/j.surfcoat.2020.126582 ↗
35. Effect of Cu on the high-temperature wear behavior of FeAl-TiB2 coatings produced by extreme high-speed laser cladding10.1016/j.apsadv.2023.100439 ↗
36. The cleavage strength of polycrystals
37. Jia, Y.J. (2020). Numerical Simulation of Ultra High Speed Laser Cladding of Fe Based Alloy. [Master’s Thesis, Tianjin University of Technology and Education].
38. Microstructural features and corrosion behavior of Fe-based coatings prepared by an integrated process of extreme high-speed laser additive manufacturing10.1016/j.surfcoat.2021.127500 ↗
39. Li, T., Zhang, L.L., Bultel, G.G.P., Schopphpven, T., Casser, A., Schleifenbaum, J.H., and Poprawe, R. (2019). Extreme High-Speed Laser Material Deposition (EHLA) of AISI 4340 Steel. Coatings, 9.10.3390/coatings9120778 ↗
40. Evolution and corrosion resistance of passive film with polarization potential on Ti-5Al-5Mo-5V-1Fe-1Cr alloy in simulated marine environments10.1016/j.corsci.2023.111334 ↗
41. Corrosion and passive behavior of AlxCrFeNi3−x (x = 0.6, 0.8, 1.0) eutectic high entropy alloys in chloride environment10.1016/j.corsci.2022.110666 ↗
42. Enhancement mechanisms of self-lubricating Ti3SiC2 ceramic doping in CoCrFeNi high-entropy alloy via high-speed laser cladding: Tribology and electrochemical corrosion10.1016/j.surfcoat.2024.130554 ↗
43. Physical properties obtained from measurement model analysis of impedance measurements10.1016/j.electacta.2020.136747 ↗
44. Comparative studies on microstructure and properties of CoCrFeMnNi high entropy alloy coatings fabricated by high-speed laser cladding and normal laser cladding10.1016/j.jallcom.2023.169517 ↗