The Evaluation of the Cytotoxicity and Corrosion Processes of Porous Structures Manufactured Using Binder Jetting Technology from Stainless Steel 316L with Diamond-like Carbon Coating
Source abstract
Abstract
With the growing interest in additive manufacturing technology, assessing the biocompatibility of manufactured elements for medical and veterinary applications has become crucial. This study aimed to investigate the corrosion properties and cytotoxicity of porous structures designed to enhance the osseointegration potential of implant surfaces. The structures were fabricated using BJ technology from 316L stainless steel powder, and their surfaces were modified with a DLC coating. The studies carried out on porous metal samples with and without DLC coatings demonstrated low cytotoxicity. However, no significant differences were found between the uncoated and DLC-coated samples, likely due to variations in the thickness of the coating on the porous samples and the occurrence of mechanical damage.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Bone Tissue Engineering Materials · Tribology and Wear Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Faculty of Mechanical Engineering and Energy, Koszalin University of Technology, Sniadeckich 2, 75-620 Koszalin, Poland
Faculty of Mechanical Engineering, Technical University of Liberec, 461-17 Liberec, Czech Republic
Inter-Faculty Department of Medical Physics, The President Stanislaw Wojciechowski Calisia University, Nowy Swiat 4, 62-800 Kalisz, Poland
Foundation for the Development of Cardiac Surgery, Wolnosci 345, 41-800 Zabrze, Poland
Faculty of Mechanical Engineering, Institute of Material Science and Engineering, Lodz University of Technology, Stefanowskiego 1/15, 94-924 Lodz, Poland
References (54)
Show source-provided references
1. Additive manufacturing technology for porous metal implant applications and triple minimal surface structures: A review
2. Kawar, S., and Vijayavenkataraman, S. (2021). Design of 3D printed scaffolds for bone tissue engineering: A review. Bioprinting, 24.10.1016/j.bprint.2021.e00167 ↗
3. Porous metal implants: Processing, properties, and challenges10.1088/2631-7990/acdd35 ↗
4. Design and manufacturing of biomimetic porous metal implants10.1557/s43578-021-00307-1 ↗
5. Biomimetic design strategy of complex porous structure based on 3D printing Ti-6Al-4V scaffolds for enhanced osseointegration10.1016/j.matdes.2022.110721 ↗
6. The mechanical properties and osteoconductivity of hydroxyapatite bone scaffolds with multi-scale porosity10.1016/j.biomaterials.2006.08.021 ↗
7. Strategies for creating living, additively manufactured, open-cellular metal and alloy implants by promoting osseointegration, osteoinduction and vascularization: An overview10.1016/j.jmst.2018.09.003 ↗
8. Role of implants surface modification in osseointegration: A systematic review10.1002/jbm.a.36829 ↗
9. The Effects of Surface Roughness on the Functionality of Ti13Nb13Zr Orthopedic Implants
10. SLM lattice structures: Properties, performance, applications and challenges10.1016/j.matdes.2019.108137 ↗
11. Mechanical characterization and properties of laser-based powder bed–fused lattice structures: A review10.1007/s00170-021-06631-4 ↗
12. Compression behavior of lattice structures produced by selective laser melting: X-ray tomography based experimental and finite element approaches10.1016/j.actamat.2018.08.030 ↗
13. Properties and applications of additively manufactured metallic cellular materials: A review10.1016/j.pmatsci.2021.100918 ↗
14. Architected cellular materials: A review on their mechanical properties towards fatigue-tolerant design and fabrication10.1016/j.mser.2021.100606 ↗
15. Chen, H., Liu, Y., Wang, C., Zhang, A., Chen, B., Han, Q., and Wang, J. (2021). Design and properties of biomimetic irregular scaffolds for bone tissue engineering. Comput. Biol. Med., 130.10.1016/j.compbiomed.2021.104241 ↗
16. Design and statistical analysis of irregular porous scaffolds for orthopedic reconstruction based on voronoi tessellation and fabricated via selective laser melting (SLM)10.1016/j.matchemphys.2019.121968 ↗
17. Deering, J., Dowling, K.I., DiCecco, L.A., McLean, G.D., Yu, B., and Grandfield, K. (2021). Selective Voronoi tessellation as a method to design anisotropic and biomimetic implants. J. Mech. Behav. Biomed. Mater., 116.10.1016/j.jmbbm.2021.104361 ↗
18. Trabecular-like Ti-6Al-4V scaffolds for orthopedic: Fabrication by selective laser melting and in vitro biocompatibility10.1016/j.jmst.2019.01.012 ↗
19. Continuous graded Gyroid cellular structures fabricated by selective laser melting: Design, manufacturing and mechanical properties10.1016/j.matdes.2018.12.007 ↗
20. Insights into the mechanical properties of several triply periodic minimal surface lattice structures made by polymer additive manufacturing10.1016/j.polymer.2017.11.049 ↗
21. Application of TPMS structure in bone regeneration
22. Laskowska, D., Szatkiewicz, T., Bałasz, B., and Mitura, K. (2023). Mechanical Properties and Energy Absorption Abilities of Diamond TPMS Cylindrical Structures Fabricated by Selective Laser Melting with 316L Stainless Steel. Materials, 16.10.3390/ma16083196 ↗
23. On the mechanisms of biocompatibility10.1016/j.biomaterials.2008.04.023 ↗
24. Paulo Davim, J. (2019). Tribology of materials for biomedical applications. Mechanical Behaviour of Biomaterials, Elsevier.
25. Biocompatibility and corrosion resistance of metallic biomaterials10.1515/corrrev-2020-0001 ↗
26. The electrochemical behavior of metallic implant materials as an indicator of their biocompatibility10.1002/jbm.820210705 ↗
27. The Mechanism of Metallosis After Total Hip Arthroplasty10.1007/s40883-021-00222-1 ↗
28. Metallosis and Nonunion: A Case Series and Literature Review
29. Metallosis After Oxinium Total Knee Arthroplasty in a Patient With Rheumatoid Arthritis: A Case Report
30. A case of metallosis mimicking cutaneous malignant melanoma following total elbow arthroplasty10.1002/jvc2.131 ↗
31. Corrosion and surface modification on biocompatible metals: A review10.1016/j.msec.2017.04.102 ↗
32. Improving biocompatibility for next generation of metallic implants10.1016/j.pmatsci.2022.101053 ↗
33. Biomedical applications of diamond-like carbon coatings: A review10.1002/jbm.b.30768 ↗
34. Carbon structure in nanodiamonds elucidated from Raman spectroscopy10.1016/j.carbon.2017.06.012 ↗
35. Nanodiamonds with powerful ability for drug delivery and biomedical applications: Recent updates on in vivo study and patents10.1016/j.jpha.2019.09.003 ↗
36. Zakrzewska, K.E., Samluk, A., Wierzbicki, M., Jaworski, S., Kutwin, M., Sawosz, E., Chwalibog, A., Pijanowska, D.G., and Pluta, K.D. (2015). Analysis of the Cytotoxicity of Carbon-Based Nanoparticles, Diamond and Graphite, in Human Glioblastoma and Hepatoma Cell Lines. PLoS ONE, 10.10.1371/journal.pone.0122579 ↗
37. Peng, Y., Peng, J., Wang, Z., Xiao, Y., and Qiu, X. (2022). Diamond-like Carbon Coatings in the Biomedical Field: Properties, Applications and Future Development. Coatings, 12.10.3390/coatings12081088 ↗
38. Interpretation of Raman spectra of disordered and amorphous carbon10.1103/PhysRevB.61.14095 ↗
39. Multifunctional nanodiamonds in regenerative medicine: Recent advances and future directions
40. Cellular redox homeostasis in endothelial cells treated with nonmodified and Fenton-modified nanodiamond powders10.1002/bab.1208 ↗
41. Are Diamond Nanoparticles Cytotoxic?10.1021/jp066387v ↗
42. Biomedical effect of tissue contact with metallic material used for body piercing modified by DLC coatings10.1016/j.diamond.2008.02.014 ↗
43. The Effect of Diamond Nanoparticles on Redox and Immune Parameters in Rats10.1166/jnn.2011.3511 ↗
44. Carbon nanoparticle-induced cell death10.1016/j.cartre.2024.100352 ↗
45. Sugar-coated cannonballs for effective antibacterial treatments but with negligible cytotoxicity based on silver (copper) -containing carbon dots and their mechanism analysis10.1016/j.carbon.2024.119085 ↗
46. Carbon nanoparticles neutralize carbon dioxide (CO2) in cytotoxicity: Potent carbon emission induced resistance to anticancer nanomedicine and antibiotics10.1016/j.ecoenv.2024.116024 ↗
47. (2024, May 02). nTopology. Available online: https://ntopology.com/.
48. Laskowska, D., Bałasz, B., Kaczorowski, W., Grabarczyk, J., Svobodova, L., Szatkiewicz, T., and Mitura, K. (2022). The DLC Coating on 316L Stainless Steel Stochastic Voronoi Tessellation Structures Obtained by Binder Jetting Additive Manufacturing for Potential Biomedical Applications. Coatings, 12.10.3390/coatings12101373 ↗
49. Additive manufacturing of biomaterials10.1016/j.pmatsci.2017.08.003 ↗
50. Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges10.1016/j.pmatsci.2020.100707 ↗
51. Grabarczyk, J., Batory, D., Kaczorowski, W., Pązik, B., Januszewicz, B., Burnat, B., Czerniak-Reczulska, M., Makówka, M., and Niedzielski, P. (2020). Comparison of Different Thermo-Chemical Treatments Methods of Ti-6Al-4V Alloy in Terms of Tribological and Corrosion Properties. Materials, 13.10.3390/ma13225192 ↗
52. (2021). Biological Evaluation of Medical Devices, Part 12: Sample Preparation and Reference Materials, Edition 5 (Standard No. ISO 10993-12:2021).
53. (2009). Biological Evaluation of Medical Devices, Part 5: Tests for In Vitro Cytotoxicity, Edition 3 (Standard No. ISO 10093-5:2009).
54. Mitura, K., Kornacka, J., Niemiec-Cyganek, A., Pawlus-Łacgecka, L., Mydłowska, K., Sobczyk-Guzenda, A., Kaczorowski, W., Ossowska, P., Bałasz, B., and Wilczek, P. (2022). The Influence of Diamond Nanoparticles on Fibroblast Cell Line L929, Cytotoxicity and Bacteriostaticity of Selected Pathogens. Coatings, 12.10.3390/coatings12020280 ↗