Revealing the Mechanical Impact of Biomimetic Nanostructures on Bacterial Behavior
Source abstract
Abstract
Naturally inspired nanostructured surfaces, by mechanically inhibiting bacterial adhesion or killing bacteria, effectively prevent the emergence of antibiotic resistance, making them a promising strategy against healthcare-associated infections. However, the current mechanical antibacterial mechanism of nanostructures is not clear, thus limiting their potential application in medical devices. This work mainly investigates the mechanical influence mechanism of biomimetic nanostructure parameters on bacterial adhesion and growth status. The results of 12 h bacterial culture showed that compared to flat surfaces, nanostructures reduced the adhesion of both E. coli and S. aureus bacteria by 49%~82%. The bactericidal efficiency against E. coli increased by 5.5%~31%, depending on the shape of the nanostructures. Nanostructures with smaller tip diameters exhibited the best anti-bacterial adhesion effects. Nanostructures with sharp tips and larger interspaces showed greater bactericidal effects against E. coli. Surfaces with larger tip diameters had the poorest antibacterial effects. Subsequently, a finite element model was established to quantitatively analyze the mechanical interactions between bacteria and nanostructures. It was found that different nanostructures affect bacterial adhesion and growth by altering the contact area with bacteria and inducing stress and deformation on the cell wall. Nanostructures with smaller tip diameters reduced the attachment area to bacteria, thereby reducing bacterial adhesion strength. Nanostructures with larger interspaces induced greater stress and deformation on the cell wall, thereby enhancing bactericidal efficiency. Finally, experimental verification with L929 cells confirmed that nanostructures do not cause mechanical damage to the cells. These studies deepen our understanding of the antibacterial mechanism of biomimetic nanostructures and provide new insights for the design of optimal nanostructures.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Bacterial biofilms and quorum sensing · Bacteriophages and microbial interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Tianjin Key Laboratory of Materials Laminating Fabrication and Interface Control Technology, School of Materials Science and Engineering, Hebei University of Technology, Tianjin 300130, China
Center for Health Science and Engineering, Hebei Key Laboratory of Biomaterials and Smart Theranostics, School of Health Sciences and Biomedical Engineering, Hebei University of Technology, Tianjin 300131, China
Funding
National Natural Science Foundation of China · Natural Science Foundation of Tianjin of China
References (68)
Show source-provided references
1. Mechano-bactericidal actions of nanostructured surfaces10.1038/s41579-020-0414-z ↗
2. A shape-adaptive, antibacterial-coating of immobilized quaternary-ammonium compounds tethered on hyperbranched polyurea and its mechanism of action10.1002/adfm.201301686 ↗
3. Silver as antibacterial agent: Ion, nanoparticle, and metal10.1002/anie.201205923 ↗
4. Implant infections: Adhesion, biofilm formation and immune evasion10.1038/s41579-018-0019-y ↗
5. Antibacterial surfaces developed from bio-inspired approaches10.1016/j.actbio.2012.01.011 ↗
6. Mediating bone regeneration by means of drug eluting implants: From passive to smart strategies10.1016/j.msec.2016.11.011 ↗
7. Efficient reduction of antibiotic residues and associated resistance genes in tylosin antibiotic fermentation waste using hyperthermophilic composting10.1016/j.envint.2019.105203 ↗
8. Activity and predicted nephrotoxicity of synthetic antibiotics based on polymyxin B10.1021/acs.jmedchem.5b01593 ↗
9. Bactericidal effects of natural nanotopography of dragonfly wing on Escherichia coli10.1021/acsami.6b13666 ↗
10. Natural bactericidal surfaces: Mechanical rupture of Pseudomonas aeruginosa cells by cicada wings10.1002/smll.201200528 ↗
11. 3D printing of large areas of highly ordered submicron patterns for modulating cell behavior
12. The influence of nanostructured features on bacterial adhesion and bone cell functions on severely shot peened 316L stainless steel10.1016/j.biomaterials.2015.09.019 ↗
13. Bioinspired bactericidal surfaces with polymer nanocone arrays10.1016/j.jcis.2018.05.096 ↗
14. Bactericidal nanospike surfaces via thermal oxidation of Ti alloy substrates10.1016/j.matlet.2015.12.140 ↗
15. Bactericidal activity of black silicon10.1038/ncomms3838 ↗
16. Nanopillared polycarbonate surfaces having variable feature parameters as bactericidal coatings10.1021/acsanm.0c00645 ↗
17. Subtle variations in surface properties of black silicon surfaces influence the degree of bactericidal efficiency10.1007/s40820-017-0186-9 ↗
18. Wu, S., Zuber, F., Maniura-Weber, K., Brugger, J., and Ren, Q. (2018). Nanostructured surface topographies have an effect on bactericidal activity. J. Nanobiotechnol., 16.10.1186/s12951-018-0347-0 ↗
19. The multi-faceted mechano-bactericidal mechanism of nanostructured surfaces10.1073/pnas.1916680117 ↗
20. Resolving physical interactions between bacteria and nanotopographies with focused ion beam scanning electron microscopy10.1016/j.isci.2021.102818 ↗
21. Eco-friendly bacteria-killing by nanorods through mechano-puncture with top selectivity
22. Hydrophilic mechano-bactericidal nanopillars require external forces to rapidly kill bacteria10.1021/acs.nanolett.0c01343 ↗
23. Nature-inspired mechano-bactericidal nanostructured surfaces with photothermally enhanced antibacterial performances10.1016/j.porgcoat.2023.107599 ↗
24. Bio-inspired self-adaptive nanocomposite array: From non-antibiotic antibacterial actions to cell proliferation10.1021/acsnano.2c05980 ↗
25. Mechano-Dynamic Analysis of the Bactericidal Activity of Bioinspired Moth-Eye Nanopatterned Surfaces10.1002/admi.202200608 ↗
26. Plasma-polymer interactions: A review of progress in understanding polymer resist mask durability during plasma etching for nanoscale fabrication10.1116/1.3532949 ↗
27. Osteogenic nanostructured titanium surfaces with antibacterial properties under conditions that mimic the dynamic situation in the oral cavity10.1039/C8BM00177D ↗
28. Self-organised nanoarchitecture of titanium surfaces influences the attachment of Staphylococcus aureus and Pseudomonas aeruginosa bacteria10.1007/s00253-015-6572-7 ↗
29. Decreased bacterial growth on titanium nanoscale topographies created by ion beam assisted evaporation10.2147/IJN.S119750 ↗
30. Structure-related antibacterial activity of a titanium nanostructured surface fabricated by glancing angle sputter deposition10.1088/0957-4484/25/19/195101 ↗
31. High aspect ratio nanostructures kill bacteria via storage and release of mechanical energy10.1021/acsnano.8b01665 ↗
32. Zahir, T., Pesek, J., Franke, S., Van Pee, J., Rathore, A., Smeets, B., Ramon, H., Xu, X., Fauvart, M., and Michiels, J. (2020). Model-driven controlled alteration of Nanopillar Cap Architecture reveals its effects on bactericidal activity. Microorganisms, 8.10.3390/microorganisms8020186 ↗
33. Tuning antimicrobial properties of biomimetic nanopatterned surfaces10.1039/C8NR00439K ↗
34. Analysis of killing of growing cells and dormant and germinated spores of Bacillus species by black silicon nanopillars10.1038/s41598-017-18125-z ↗
35. Bactericidal effects of nanopatterns: A systematic review10.1016/j.actbio.2018.09.059 ↗
36. Modaresifar, K., Kunkels, L.B., Ganjian, M., Tümer, N., Hagen, C.W., Otten, L.G., Hagedoorn, P.-L., Angeloni, L., Ghatkesar, M.K., and Fratila-Apachitei, L.E. (2020). Deciphering the roles of interspace and controlled disorder in the bactericidal properties of nanopatterns against Staphylococcus aureus. Nanomaterials, 10.10.3390/nano10020347 ↗
37. Bacterial anti-adhesion surface design: Surface patterning, roughness and wettability: A review10.1016/j.jmst.2021.05.028 ↗
38. The nature of inherent bactericidal activity: Insights from the nanotopology of three species of dragonfly10.1039/C5NR08542J ↗
39. Cicada wing surface topography: An investigation into the bactericidal properties of nanostructural features10.1021/acsami.5b08309 ↗
40. Ivanova, E., and Crawford, R. (2015). Antibacterial Surfaces, Springer.10.1007/978-3-319-18594-1 ↗
41. Enhancement and suppression effects of a nanopatterned surface on bacterial adhesion10.1103/PhysRevE.93.052419 ↗
42. Theoretical study on the bactericidal nature of nanopatterned surfaces10.1016/j.jtbi.2015.08.011 ↗
43. Biophysical model of bacterial cell interactions with nanopatterned cicada wing surfaces10.1016/j.bpj.2012.12.046 ↗
44. Lazzini, G., Lutey, A., Romoli, L., and Fuso, F. (2021). Molecular dynamics model for the antibactericity of textured surfaces. Colloids Surf. B Biointerfaces, 199.10.1016/j.colsurfb.2020.111504 ↗
45. Cui, Q., Liu, T., Li, X., Zhao, L., Wu, Q., Wang, X., Song, K., and Ge, D. (2021). Validation of the mechano-bactericidal mechanism of nanostructured surfaces with finite element simulation. Colloids Surf. B Biointerfaces, 206.10.1016/j.colsurfb.2021.111929 ↗
46. Mechanics of bacterial interaction and death on nanopatterned surfaces10.1016/j.bpj.2020.12.003 ↗
47. Biocompatible mechano-bactericidal nanopatterned surfaces with salt-responsive bacterial release10.1016/j.actbio.2022.01.038 ↗
48. Atomic force microscopy of cell growth and division in Staphylococcus aureus10.1128/JB.186.11.3286-3295.2004 ↗
49. An introduction to Staphylococcus aureus, and techniques for identifying and quantifying S. aureus adhesins in relation to adhesion to biomaterials: Review10.22203/eCM.v004a04 ↗
50. Analyzing the mechano-bactericidal effect of nano-patterned surfaces on different bacteria species10.1016/j.surfcoat.2020.126782 ↗
51. Measuring the stiffness of bacterial cells from growth rates in hydrogels of tunable elasticity10.1111/j.1365-2958.2012.08063.x ↗
52. Thickness and elasticity of gram-negative murein sacculi measured by atomic force microscopy10.1128/JB.181.22.6865-6875.1999 ↗
53. Bending forces plastically deform growing bacterial cell walls10.1073/pnas.1317497111 ↗
54. Biophysical implications of lipid bilayer rheometry for mechanosensitive channels10.1073/pnas.1409011111 ↗
55. Fowler, L., Engqvist, H., and Öhman-Mägi, C. (2019). Effect of copper ion concentration on bacteria and cells. Materials, 12.10.3390/ma12223798 ↗
56. Modeling bacterial adhesion on the nanopatterned surface by varying contact area10.1016/j.jmst.2024.02.009 ↗
57. Surface wettability is a key feature in the mechano-bactericidal activity of nanopillars10.1021/acsami.2c03258 ↗
58. Mechanical properties of Bacillus subtilis cell walls: Effects of ions and lysozyme10.1128/jb.173.1.204-210.1991 ↗
59. Viability, strength, and fragmentation of Saccharopolyspora erythraea in submerged fermentation10.1002/bit.10017 ↗
60. Strength of mid-logarithmic and stationary phase Saccharopolyspora erythraea hyphae during a batch fermentation in defined nitrate-limited medium10.1002/bit.1070 ↗
61. Mechanical properties of Bacillus subtilis cell walls: Effects of removing residual culture medium10.1128/jb.173.1.197-203.1991 ↗
62. A novel biocompatible PDA/IR820/DAP coating for antibiotic/photodynamic/photothermal triple therapy to inhibit and eliminate Staphylococcus aureus biofilm10.1016/j.cej.2020.125017 ↗
63. Inhibition of Candida auris biofilm formation on medical and environmental surfaces by silver nanoparticles10.1021/acsami.9b20708 ↗
64. High-aspect-ratio nanostructured surfaces as biological metamaterials10.1002/adma.201903862 ↗
65. The benefits of going small: Nanostructures for mammalian cell transfection10.1021/acsnano.0c04624 ↗
66. Mechanism study of bacteria killed on nanostructures10.1021/acs.jpcb.9b07732 ↗
67. Lee, S.W., Phillips, K.S., Gu, H., Kazemzadeh-Narbat, M., and Ren, D. (2021). How microbes read the map: Effects of implant topography on bacterial adhesion and biofilm formation. Biomaterials, 268.10.1016/j.biomaterials.2020.120595 ↗
68. Nano-structured antimicrobial surfaces: From nature to synthetic analogues10.1016/j.jcis.2017.07.021 ↗