Two-Body and Three-Body Wear Behavior of a Dental Fluorapatite Glass-Ceramic
Source abstract
Abstract
As a veneering porcelain coating of dental prosthesis, two-body and three-body wear behavior of dental glass-ceramic with the main crystalline phase of fluorapatite has not been comprehensively studied. In this work, a self-made fluorapatite glass-ceramic was synthesized and the mechanical and tribological performances of the glass-ceramic were tested, comparing with a commercial feldspathic glass-ceramic. The friction and wear experiments were performed between disk-shaped glass-ceramics and natural teeth in two-body (dry, water, saliva) and three-body (slurry) modes, respectively. Results showed that good mechanical properties of fluorapatite glass-ceramic can be achieved by the sintering process. In both two-body and three-body modes, the fluorapatite glass-ceramic had a smaller friction coefficient and wear rate and caused less damage on antagonistic teeth than the feldspathic glass-ceramic. The greater mechanical properties give fluorapatite glass-ceramic a better wear resistance and reduce the adhesive wear.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Dental materials and restorations · Dental Implant Techniques and Outcomes · Bone Tissue Engineering Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Mechanical Engineering, University of Jinan, Jinan 250022, China
School of Stomatology, Shandong University, Jinan 250012, China
School of Mechanical and Automotive Engineering, Qilu University of Technology (Shandong Academy of Sciences), Jinan 250353, China
Funding
National Natural Science Foundation of P.R. China · Shandong Provincial Natural Science Foundation · Project of Shandong Province Higher Educational Science and Technology Program · China Postdoctoral Science Foundation
References (30)
Show source-provided references
1. All-ceramic or metal-ceramic tooth-supported fixed dental prostheses (FDPs)? A systematic review of the survival and complication rates. Part I. Single crowns (SCs)10.1016/j.dental.2016.09.032 ↗
2. Mechanical and bioactive properties of lithium disilicate glass-ceramic mixtures synthesized by two different methods10.1016/j.jnoncrysol.2019.01.004 ↗
3. Low temperature sintering of fluorapatite glass-ceramics10.1016/j.dental.2013.10.009 ↗
4. Fatigue reliability of dental ceramic materials—An in vitro study10.1080/17436753.2018.1476807 ↗
5. Fracture mechanics analyses of ceramic/veneer interface under mixed-mode loading10.1016/j.jmbbm.2014.07.019 ↗
6. Ceramic-like wear behaviour of human dental enamel10.1016/j.jmbbm.2011.12.002 ↗
7. Baino, F., and Verné, E. (2017). Production and Characterization of Glass-Ceramic Materials for Potential Use in Dental Applications: Thermal and Mechanical Properties, Microstructure, and In Vitro Bioactivity. Appl. Sci., 7.10.3390/app7121330 ↗
8. Factors affecting enamel and ceramic wear: A literature review10.1067/mpr.2002.123851 ↗
9. Tribology of dental materials: A review10.1088/0022-3727/41/11/113001 ↗
10. Wear properties of dental ceramics and porcelains compared with human enamel10.1016/j.prosdent.2015.09.010 ↗
11. Wear of human enamel opposing monolithic zirconia, glass-ceramic, and composite resin. an in vitro study10.1016/j.prosdent.2014.05.006 ↗
12. Reliability analyses of zirconium oxide and lithium disilicate restorations in vitro and in vivo10.14219/jada.archive.2011.0336 ↗
13. A comparative study of progressive wear of four dental monolithic, veneered glass-ceramics10.1016/j.jmbbm.2017.05.035 ↗
14. Comparative study of the wear of the pair human teeth/Vita Enamic® vs. commonly used dental ceramics through chewing simulation10.1016/j.jmbbm.2018.08.029 ↗
15. A review of saliva: Normal composition, flow, and function10.1067/mpr.2001.113778 ↗
16. The lubricating properties of human whole saliva10.1007/s11249-007-9232-y ↗
17. Friction and wear behavior of dental feldspathic porcelain10.1016/j.wear.2006.01.024 ↗
18. Wear of human enamel: A quantitative in vitro assessment10.1177/00220345980770120601 ↗
19. Friction and wear of restorative dental materials10.1177/00220345710500011001 ↗
20. The effects of salivas on occlusal forces10.1111/joor.12260 ↗
21. Three-body wear potential of dental yttrium-stabilized zirconia ceramic after grinding, polishing, and glazing treatments10.1016/j.prosdent.2013.12.021 ↗
22. Two- and three-body wear of composite resins10.1016/j.dental.2012.09.008 ↗
23. The effect of food medium on the wear behaviour of veneering porcelain: An in vitro study using the three-body abrasion mode10.1016/j.jdent.2019.02.010 ↗
24. The effects of calcium oxide on fluorapatite crystal morphology and mechanical property of functional glass-ceramic10.1016/j.ceramint.2018.08.050 ↗
25. Tribological behavior evaluation of dental fluorapatite glass ceramic10.1007/s41779-018-0243-y ↗
26. Characterization of three- and four-point bending properties of porous metal fiber sintered sheet10.1016/j.matdes.2013.10.077 ↗
27. (2019). Plastics- Determination of Flexural Properties, International Organization for Standardization. ISO 178:2019.
28. Comparative study of wear of enamel induced by alternating and simultaneous combinations of abrasion and erosion in vitro10.1159/000073399 ↗
29. Wear of two denture teeth materials in vivo-2-year results10.1016/j.dental.2013.04.012 ↗
30. Wear of two artificial tooth materials in vivo: A 12-month pilot study10.1016/S0022-3913(09)60118-9 ↗