Effects of Temperature and Frequency on Fretting Wear Behavior of 316L Austenitic Stainless Steel Before and After Plasma Carburization
Source abstract
Abstract
Double-glow low-temperature plasma carburization (LTPC) was utilized to prepare a carburized layer (PC) on a 316L austenitic stainless steel (ASS) surface, and the fretting wear behavior was evaluated at various temperatures and frequencies. The friction coefficient curves could be divided into running-in, wear, and stable stages. With increasing temperature, the wear mechanism of 316L ASS changed from adhesive and abrasive wear to adhesive wear, accompanied by plastic deformation, fatigue peeling, and oxidative wear. The carburized layer had an adhesive wear, plastic deformation, fatigue peeling, and oxidative wear mechanism. As the frequency increased, 316L ASS showed an adhesive wear, fatigue peeling, and oxidative wear mechanism. With increasing frequency, the wear mechanism of PC changed from abrasive and adhesive wear to abrasive wear, adhesive wear, and fatigue peeling, accompanied by oxidative wear. The carburized layer generally showed lower frictional energy dissipation coefficients and wear rates than 316L ASS. This work demonstrated that plasma carburization could improve the fretting wear stability and resistance of 316L ASS. The rise in frictional temperature, the tribo-chemical reaction time, and the evolution of debris collectively influenced the wear mechanisms and wear morphologies of 316L ASS before and after plasma carburization. This could provide theoretical support for the fretting damage behaviors of ball valves under severe service conditions.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Mechanical stress and fatigue analysis · Metal and Thin Film Mechanics · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Materials Science and Engineering, Lanzhou University of Technology, Lanzhou 730050, China
State Key Laboratory of Advanced Processing and Recycling of Non-Ferrous Metals, Lanzhou University of Technology, Lanzhou 730050, China
Wenzhou Pump and Valve Engineering Research Institute, Lanzhou University of Technology, Wenzhou 325000, China
Funding
Key Science and Technology Project of Gansu Province, China · Science and Technology Project of Wenzhou City, China · Major Science and Technology Project of Gansu Province, China
References (55)
Show source-provided references
1. Fretting Wear Rate Evolution of a Flat-on-flat Low Alloyed Steel Contact: A Weighted Friction Energy Formulation10.1016/j.wear.2018.12.022 ↗
2. Proper Orthogonal Decomposition for the Prediction of Fretting Wear Characteristics10.1016/j.triboint.2020.106545 ↗
3. Impact-sliding Fretting Tribocorrosion Behavior of 316L Stainless Steel in Solution with Different Halide Concentrations10.1007/s40544-023-0739-5 ↗
4. Crystal Plasticity Modeling of Fretting Fatigue Behavior of an Aluminum Alloy10.1016/j.triboint.2020.106841 ↗
5. Wen, S.Z. (1990). Principles of Tribology, Tsinghua University Press.
6. Effect of Heat Treatment Temperature and Lubricating Conditions on the Fretting Wear Behavior of SAF 2507 Super Duplex Stainless Steel10.1115/1.4044081 ↗
7. Fretting Wear Resistance of Amorphous/Amorphous (AlCrFeNi)N/TiN High Entropy Nitride Nanolaminates10.1016/j.jmst.2023.09.035 ↗
8. Effects of Frequency on the Fretting Wear Behavior of Aluminum Bronze Coatings10.1016/j.surfcoat.2023.129306 ↗
9. Zhu, M., Cai, Z., and Zhou, Z. (2021). Fretting Wear Theory, Science Press.
10. Zhu, M., Cai, Z., and Zhou, Z. (2022). Fretting Wear Under Special Condition, Science Press.
11. Nitrocarburising of AISI 316 Stainless Steel at Low Temperature10.1080/02670844.2016.1253268 ↗
12. Montanari, R., Lanzutti, A., Richetta, M., Tursunbaev, J., Vaglio, E., Varone, A., and Verona, C. (2022). Plasma Carburizing of Laser Powder Bed Fusion Manufactured 316L Steel for Enhancing the Surface Hardness. Coatings, 12.10.3390/coatings12020258 ↗
13. Fatigue Life Enhancement of Additive Manufactured 316l Stainless Steel by LSP Using a DPSS Laser System10.1080/02670844.2022.2060463 ↗
14. Soft and Thick DLC Deposited on AISI 316L Stainless Steel with Nitriding as Pre-Treatment Tested in Severe Wear Conditions10.1016/j.diamond.2020.107881 ↗
15. The Effects of Cold Rolling and Building Orientation on Sensitization of Laser Powder Bed Fused 316L Stainless Steel10.1016/j.matlet.2023.135813 ↗
16. Microbiologically Induced Intergranular Corrosion of 316L Stainless Steel Dental Material in Saliva10.1016/j.matchemphys.2023.128799 ↗
17. Influence of Rf Plasma Carbonitriding on AISI304L, SSMn6Ni and SSMn10Ni for Nuclear Applications10.1088/2053-1591/ab30e2 ↗
18. Improvement of Plasma Carbonitriding Modified Layer on TA15 Surface by RASP-Assisted DGPSA Treatment10.1016/j.vacuum.2022.111499 ↗
19. Tribological Behaviour of TiAlN and AlCrN Coatings on Stainless Steel10.1177/02670844241241120 ↗
20. Lowering the Coefficient of Martensite Steel by Forming a Self-Lubricating Layer in Dry Sliding Wear10.1088/2053-1591/ab032a ↗
21. Fretting Wear Resistance at Ambient and Elevated Temperatures of 316 Stainless Steel Improved by Laser Cladding with Co-based Alloy/WC/CaF2 Composite Coating10.1016/j.optlastec.2023.109428 ↗
22. The Influence of Frictional Treatment and Low-Temperature Plasma Carburizing on the Microhardness and Electromagnetic Properties of Metastable Austenitic Steel10.1134/S0031918X23601166 ↗
23. Growth of Fe3C-VACNT Surfaces by Metal Dusting under Plasma Carburizing: Fractional Factorial Study and Correlation with Morphological and Structural Aspects10.1016/j.surfcoat.2023.129788 ↗
24. Tribological Performance of Low-Temperature Plasma Carburized AISI 420 Martensitic Stainless Steel10.1016/j.surfcoat.2023.130239 ↗
25. Study on Fretting Wear Behaviour of Plasma Nitriding Layer of 31CrMoV9 Steel
26. The Influence of Frictional Treatment and Low-Temperature Plasma Carburizing on the Structure and Phase Composition of Metastable Austenitic Steel10.1134/S0031918X23600483 ↗
27. Slurry and Liquid Impingement Erosion Behavior of Low-Temperature Plasma Carburized AISI 420 Martensitic Stainless Steel10.1016/j.surfcoat.2024.130390 ↗
28. Temperature-Frequency Wear Mechanism Maps for a Heat-Resistant Austenitic Stainless Steel10.1016/j.wear.2023.204844 ↗
29. The Role of Temperature and Frequency on Fretting Wear of a Like-on-Like Stainless Steel Contact10.1007/s11249-017-0858-0 ↗
30. Effect of the Third Body Layer Formed at Different Temperature on Fretting Wear Behavior of 316 Stainless Steel in the Composite Fretting Motion of Slip and Impact10.1016/j.wear.2021.204220 ↗
31. Interaction of Displacement Amplitude and Frequency Effects in Fretting Wear of a High Strength Steel: Impact on Debris Bed Formation and Subsurface Damage10.1016/j.wear.2021.203981 ↗
32. Analysis on High Temperature Fretting Wear Behaviour of 20Cr13 Stainless Steel
33. High-Temperature Dry Sliding Wear Behavior of Additively Manufactured Austenitic Stainless Steel (316L)10.1016/j.wear.2024.205259 ↗
34. Effect of Temperature on Dry Sliding Tribological Behavior of 7A04 Pin-50CrMo4 Disc Contact Pair
35. Friction and Wear Properties of TMCP FH36 Marine Steel Plate at Different Temperatures
36. Frequency Induced Fretting Corrosion Mechanism Evolution of Alloy 690 Exposed to Simulated Secondary Water10.1016/j.wear.2023.205100 ↗
37. Effect of the Frequency on Fretting Corrosion Behavior Between Alloy 690TT Tube and 405 Stainless Steel Plate in High Temperature Pressurized Water10.1016/j.triboint.2021.107229 ↗
38. The Transformation of Fretting Corrosion Mechanism of Zirconium Alloy Tube Mating with 304 Stainless Steel in High Temperature High Pressure Water10.1016/j.jnucmat.2023.154304 ↗
39. Sun, L., Li, Y.D., Cao, C., Bi, G.L., and Luo, X.M. (2024). Effect of Low-Temperature Plasma Carburization on Fretting Wear Behavior of AISI 316L Stainless Steel. Coatings, 14.10.3390/coatings14020158 ↗
40. Revealing the Critical Failure Factor and Sub-Surface Damage Mechanism of 316 Stainless Steel during Fretting Corrosion under the Molten Lead-Bismuth Eutectic10.1016/j.triboint.2023.108767 ↗
41. Study on the Fretting Wear Performance and Mechanism of GH4169 Superalloy after Various Laser Shock Peening Treatments10.1016/j.optlastec.2023.110301 ↗
42. Effects of Different Grain Sized Sands on Wear Behaviours of NBR/Casting Copper Alloys10.1016/j.wear.2017.02.019 ↗
43. Progress in Studying the Fretting Wear/Corrosion of Nuclear Steam Generator Tubes10.1016/j.anucene.2020.107556 ↗
44. Contact Size, Frequency and Cyclic Normal Force Effects on Ti–6Al–4V Fretting Wear Processes: An Approach Combining Friction Power and Contact Oxygenation10.1016/j.triboint.2016.12.049 ↗
45. Formation of Nano-Laminated Structures in a Dry Sliding Wear-Induced Layer under Different Wear Mechanisms of 20CrNi2Mo Steel10.1016/j.apsusc.2017.06.187 ↗
46. Wear Resistance Improvement of Austenitic 316L Steel by Laser Alloying with Boron10.1016/j.surfcoat.2016.02.058 ↗
47. Tangential Fretting Wear Characteristics of 690 Alloy Tubes Under Different Normal Force
48. Is the Wear Coefficient Dependent upon Slip Amplitude in Fretting? Vingsbo and Soderberg Revisited10.1016/j.wear.2014.11.005 ↗
49. Investigation of Anodic Plasma Electrolytic Carbonitriding on Medium Carbon Steel10.1016/j.surfcoat.2017.01.109 ↗
50. The Effect of Frequency on Both the Debris and the Development of the Tribologically Transformed Structure during Fretting Wear of a High Strength Steel10.1016/j.wear.2018.12.035 ↗
51. Fretting Wear Mechanism of Plasma Nitride 35CrMo Steel under Dry and Lubricated Conditions
52. Quantification of Fretting Damage10.1016/S0043-1648(96)07306-1 ↗
53. The Effect of Temperature on Wear and Friction of a High Strength Steel in Fretting10.1016/j.wear.2013.03.048 ↗
54. Dai, Z., Wang, M., and Xue, Q. (2002). Introduction to Tribo-Thermodynamics, National Defense Industry Press.
55. Fretting Wear of Pure Cobalt Chromium and Nickel to Identify the Distinct Roles of HS25 Alloying Elements in High Temperature Glaze Layer Formation10.1016/j.wear.2017.01.049 ↗