Enhanced Coagulation for Algae Removal Using Composite Al-Based Coagulants: Collaborative Optimization Mechanism of Aluminum Morphology

The main purpose of this paper was to reveal the effect of aluminum (Al)-based coagulants on enhanced coagulation for the removal of algae and the synergistic optimization mechanism among different Al species. The formation, breakage, and regrowth processes of algal coagulation flocs formed by a series of monomeric Al-based coagulants (Al2(SO4)3, Al13, and Al30), Al13/Al30 composite coagulant and poly(diallyldimethylammonium chloride)/Al13 (PDADMAC/Al13) composite coagulant were studied. Results indicated that Al13 mainly employed a charge neutralization mechanism, which was conducive to the destabilization of algae and the regeneration of flocs, while Al30 mainly employed a sweep flocculation mechanism, which was conducive to the formation of algae and the strength of flocs. Meanwhile, the charge neutralization was the main mechanism during the algae coagulation process because it could effectively remove the soluble microbial products (SMP) component in the extracellular organic matter (EOM). Therefore, Al13 could achieve a higher coagulation performance than other monomeric Al-based coagulants. The Al13/Al30 composite coagulant could make up for the deficiency of the sweep flocculation mechanism in Al13 and charge neutralization mechanism in Al30, and achieve the best synergistic optimization performance at Al13:Al30-7:3. Additionally, PDADMAC, as a polymer, could further enhance the charge neutralization ability of Al13 at low dosages and the sweep flocculation ability of Al13 at high dosages, respectively. However, an excessive dosage would lead to charge reversal and thus reduce the coagulation effect. Therefore, controlling the dosage was key when using Al-composite coagulants. The findings of our research could offer a certain theoretical foundation for the development of inorganic polymer flocculants.