Microstructure and Properties of CoCrFeNiMnTix High-Entropy Alloy Coated by Laser Cladding
Source abstract
Abstract
In this study, laser cladding of CoCrFeNiMnTix (x is the proportion of the mass of a material, x = 0.0, 0.2, 0.4, 0.6, 0.8) high-entropy alloy (HEA) composite powder coating on 45 steel substrate was studied by using the method of preplaced powder. The phase composition, morphology, microhardness, corrosion resistance and wear properties of CoCrFeNiMnTix high entropy alloy were analyzed by XRD, SEM, microhardness tester, electrochemical workstation and reciprocating friction wear tester, respectively. The influences of Ti concentration on structure and properties of CoCrFeNiMn HEA laser cladding coating were discussed. The macromorphology of CoCrFeNiMnTix HEA coating layer becomes worse with the increase in Ti quantity. The coating layer is a face-centered cubic solid solution phase. The microstructure of the coating layer is dominated by dendrites and equiaxed crystals. The average microhardness of the coating layer grows with the increases in Ti content, and CoCrFeNiMnTi0.8 can reach 823 HV. The friction coefficient of the cladding coating gradually reduces and the wear resistance adds as Ti content rises; the friction coefficients of CoCrFeNiMnTi0.6 and CoCrFeNiMnTi0.8 cladding coating are similar, at 0.835 and 0.828, respectively. Adhesive and abrasive wear are the two basic types of cladding coating wear. In 3.5 wt.% NaCl solution, the corrosion potential of cladding coating increases with increases in Ti content, the corrosion potential of CoCrFeNiMnTi0.8 is about 244 mV higher than that of CoCrFeNiMnTi0, and the density of corrosion current drops to 3.41 × 10−6 A/cm2 from 7.17 × 10−5 A/cm2.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Intelligent Manufacturing and Electrical Engineering, Nanyang Normal University, Nanyang 473061, China
Funding
Key Research Project of Henan Province Department of Education
References (41)
Show source-provided references
1. Tribological properties of micro-pit texture generated by composite processing
2. Effect of Cu content on microstructure evolution and tribological behaviors of Ni60 composite coatings on 45# steel by laser cladding10.1016/j.optlastec.2022.108549 ↗
3. Corrosion resistance improvement of 45 steel by Fe-based amorphous coating10.1016/j.vacuum.2018.03.042 ↗
4. Improving the corrosion resistance and mechanical property of 45 steel surface by laser cladding with Ni60CuMoW alloy powder10.1016/j.surfcoat.2012.05.115 ↗
5. Enhanced wear and corrosion resistances of AlCoCrFeNi high-entropy alloy coatings via high-speed laser cladding10.1016/j.mtcomm.2022.104417 ↗
6. Microstructure and abrasion resistance of In-situ TiC particles reinforced Ni-based composite coating by laser cladding
7. Effect of WC on microstructure, wear resistance and impact resistance of laser cladding layer
8. One-step additive manufacturing and microstructure evolution of melt-grown Al2O3/GdAlO3/ZrO2 eutectic ceramics by laser directed energy deposition10.1016/j.jeurceramsoc.2021.01.047 ↗
9. Microstructure and mechanical properties of SiC-reinforced Inconel 718 composites fabricated by laser cladding10.1016/j.surfcoat.2023.129514 ↗
10. High-entropy alloys: Overview
11. Wear and corrosion properties of nano-TiC reinforced AlCoCrFeNi high entropy alloy prepared by laser cladding
12. Fabrication of bulk Al-Co-Cr-Fe-Ni high-entropy alloy using combined cable wire arc additive manufacturing (CCW-AAM): Microstructure and mechanical properties10.1016/j.jmst.2020.10.037 ↗
13. A review on laser cladding of high-entropy alloys, their recent trends and potential applications10.1016/j.jmapro.2021.06.041 ↗
14. Wear, erosion and corrosion behavior of laser cladded high entropy alloy coatings—A review10.1016/j.matpr.2020.08.763 ↗
15. Microhardness, wear resistance, and corrosion resistance of AlxCrFeCoNiCu high-entropy alloy coatings on aluminum by laser cladding10.1016/j.optlastec.2020.106632 ↗
16. Wear resistance of FeCoCrNiMnAlx high-entropy alloy coatings at high temperature10.1016/j.apsusc.2020.145736 ↗
17. Dry abrasive wear and solid particle erosion assessments of high entropy alloy coatings fabricated by cold spraying10.1016/j.mtcomm.2023.105527 ↗
18. Microstructure evolution and properties of Fe-Ni-Cr-Co-Mo-W high-entropy alloy coatings by plasma surface alloying technology10.1016/j.surfcoat.2023.129732 ↗
19. Research progress in wear resistance of high entropy alloy coating prepared by laser cladding
20. Laser cladding of NiCrCoFeNbMox high-entropy alloy to increase resistance to corrosion of gas turbine blades10.1016/j.vacuum.2023.112749 ↗
21. Wear resistance of SiC/Ni composite coating based on laser cladding
22. Lv, T.Y., Zou, W.K., He, J.Q., Ju, X., and Zheng, C.B. (2024). Study on the microstructure and properties of FeCoNiCrAl high-entropy alloy coating prepared by laser cladding-remelting. Coatings, 14.10.3390/coatings14010049 ↗
23. Zhang, H.L., Li, W.J., Xu, H.H., Chen, H.H., Chen, L., Zeng, J.S., Ding, Z.B., Guo, W.M., and Liu, B. (2022). Microstructure and corrosion behavior of laser cladding FeCoNiCrBSi based high-entropy alloy coatings. Coatings, 12.10.3390/coatings12050628 ↗
24. Research progress on tribological properties of high-entropy alloy coatings
25. Advances in corrosion resistance of high entropy alloy coating prepared by laser cladding
26. Microstructural characterization and corrosion behaviour of AlCoCrFeNiTix high-entropy alloy coatings fabricated by laser cladding10.1016/j.surfcoat.2019.01.044 ↗
27. The CrFeNbTiMox refractory hihg-entropy alloy coating prepared on the 40Cr by laser cladding10.1016/j.jallcom.2023.171630 ↗
28. Effect of titanium on the structural, mechanical and surface properties of CoCrFeMnNiTix high entropy alloy fabricated by selective laser melting10.1016/j.intermet.2024.108281 ↗
29. Microstructures and properties of FeCrAlMoSix high entropy alloy coatings prepared by laser cladding on a titanium alloy substrate10.1016/j.surfcoat.2024.130437 ↗
30. Sun, Z.L., Zhang, M.Y., Wang, G.Q., Yang, X.F., and Wang, S.R. (2021). Wear and corrosion resistance analysis of FeCoNiTiAlx high-entropy alloy coating prepared by laser cladding. Coatings, 11.10.3390/coatings11020155 ↗
31. Liu, Y., Xu, Z.X., Xu, G.J., and Chen, H.Y. (2023). Influence of Al addition on the microstructure and wear behavior of laser cladding FeCoCrNiAlx high-entropy alloy coatings. Coatings, 13.10.3390/coatings13020426 ↗
32. High temperature tribological properties of CoCrFeNINbx high-entropy alloy coatings by laser cladding
33. Microstructure and properties of CoCrFeNiTix high entropy alloy coated by laser cladding
34. Effects of Ti content on hardness and wear resistance of CoCrFeNiTi high-entropy alloy coatings
35. Xu, Y.K., Li, Z.Y., Liu, J.R., Chen, Y.N., Zhang, F.Y., Wu, L., Hao, J.M., and Liu, L. (2020). Micrstructure evolution and properties of laser cladding CoCrFeNiTiAlx high-entropy alloy coatings. Coatings, 10.10.3390/coatings10040373 ↗
36. Liang, H., Hou, J.X., Jiang, L., and Cao, Z.Q. (2024). Microstructure and dry-sliding wear resistance of CoCrFeNiMoTix high entropy alloy coating produced by laser cladding. Coating, 14.10.3390/coatings14020221 ↗
37. He, B., Zhang, N.N., Lin, D.Y., Zhang, Y., Dong, F.Y., and Li, D.Y. (2017). The phase evolution and property of FeCoCrNiAlTix high-entropy alloying coatings on Q235 laser cladding. Coatings, 7.10.3390/coatings7100157 ↗
38. Corrosion resistance of Cu-Zr-Al-Y and Zr-Cu-Ni-Al-Nb bulk metallic glasses
39. Understanding the nature of passivation film formed during corrosion of Fe39Mn20Co20Cr15Si5Al1 high entropy alloy in 3.5 wt% NaCl solution10.1016/j.jallcom.2022.164100 ↗
40. Physics and phenomenology of strain hardening: The FCC case10.1016/S0079-6425(02)00003-8 ↗
41. Corrosion resistance enhancement of CoCrFeMnNi high-entropy alloy fabricated by additive manufacturing10.1016/j.corsci.2020.108954 ↗