A Review of Research Progress on the Fretting Fatigue Mechanism and Protection Measures of Metal Matrix Composites
Source abstract
Abstract
The performance characteristics of metal matrix composites (MMCs) and the need to study their fretting fatigue and wear during service are discussed. Four main elements of the study of fretting fatigue wear of MMCs (aluminum, copper, titanium, iron, magnesium, nickel, etc.) are discussed. These are factors influencing fretting fatigue, mechanism research, life prediction, and the development process of protection methods, respectively. Factors such as internal crack nucleation and development, loading conditions, and working environment are analyzed and discussed. The development trend of fretting fatigue research is outlined from several perspectives such as the fretting fatigue mechanism, research methods, and protection methods. In particular, the current state of research and the results achieved are highlighted, and some of the issues that remain to be studied are illustrated. The combined effects of fretting, fatigue and wear, the accuracy and applicability of fretting fatigue life prediction, the dispersion of the strengthening phase, and interface problems of MMCs themselves, etc., are all issues that need further research. The review summarizes some of the existing results and provides some reference help for subsequent developments.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Mechanical stress and fatigue analysis · Electrical Contact Performance and Analysis · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Construction and Application Research Center, Naval Aeronautical University, Yantai 264001, China
School of Materials Science and Engineering, Southwest Jiaotong University, Chengdu 610031, China
School of Intelligent Manufacturing and Equipment, Chengdu Textile College, Chengdu 611731, China
References (100+)
Show source-provided references
1. Evaluation of Mechanical and Wear Properties of Aluminium AA430 Reinforced with SiC and Mgo10.1016/j.matpr.2017.01.051 ↗
2. Statistical Design Analysis of Silver-Titanium Dioxide Nanocomposite Materials Synthesized via Horizontal Vapor Phase Growth (HVPG)10.4028/www.scientific.net/KEM.735.210 ↗
3. Analysis of Stir Cast Aluminium Silicon Carbide Metal Matrix Composite: A Comprehensive Review10.1016/j.protcy.2016.05.052 ↗
4. Role of Reinforcements on the Mechanical and Tribological Behavior of Aluminum Metal Matrix Composites–A Review10.1016/j.matpr.2018.06.371 ↗
5. Microstructure and fretting wear of laser cladding self-lubricating anti-wear composite coatings on TA2 alloy after aging treatment10.1016/j.optlastec.2019.105599 ↗
6. Fretting wear behavior of CuNiAl against 42CrMo4 under different lubrication conditions10.1016/j.triboint.2017.08.013 ↗
7. Fretting wear in self-piercing riveted aluminium alloy sheet10.1016/S0043-1648(03)00274-6 ↗
8. Fretting behaviour of self-piercing riveted aluminium alloy joints under different interfacial conditions10.1016/j.matdes.2004.10.014 ↗
9. Fatigue and Fretting of Self-Piercing Riveted Joints10.1115/IMECE2002-32336 ↗
10. The Endurance of Metals: Experiments on Rotating Beams at University College, London10.1243/PIME_PROC_1911_081_017_02 ↗
11. Fretting Corrosion and Fatigue Strength: Brief Results of Preliminary Experiments10.1243/PIME_PROC_1941_146_012_02 ↗
12. An Investigation of the Fretting Corrosion of Closely Fitting Surfaces10.1243/PIME_PROC_1939_141_034_02 ↗
13. Analysis of Fretting Damage Using Confocal Microscope
14. Wear performance of nano-Al2O3 particles and CNTs reinforced magnesium matrix composites by friction stir processing10.1016/j.wear.2012.11.079 ↗
15. Synthesize of AZ31/TiC magnesium matrix composites using friction stir processing10.1016/j.jma.2014.12.007 ↗
16. Fabrication of Mg-ZrO2 surface layer composites by friction stir processing10.1016/j.jmatprotec.2015.09.047 ↗
17. Formations of AZ91/Al2O3 nano-composite layer by friction stir processing10.1016/j.jma.2016.11.002 ↗
18. Experimental investigation of Mg/SiC composite fabrication via friction stir processing10.1007/s00170-016-9801-z ↗
19. Effect of rotational speed and probe profile on microstructure and hardness of AZ31/Al2O3 nanocomposites fabricated by friction stir processing10.1016/j.matdes.2010.11.055 ↗
20. The effect of process parameters on microstructural characteristics of AZ91/SiO2 composite fabricated by FSP10.1016/j.msea.2012.08.084 ↗
21. Torsional fretting wear behaviour of 7075 aluminium alloy in various relative humidity environments10.1016/j.wear.2009.01.024 ↗
22. Friction and wear of 7075 aluminum alloy induced by torsional fretting10.1016/S1003-6326(09)60148-5 ↗
23. Study on rotational fretting wear of 7075 aluminum alloy10.1016/j.triboint.2009.12.032 ↗
24. Dual-rotary fretting wear behavior of 7075 aluminum alloy10.1016/j.triboint.2011.11.024 ↗
25. Quantitative analysis of fretting wear crack nucleation in 7075-T6 aluminum alloy using fretting maps10.1016/j.wear.2005.01.024 ↗
26. Impact of contact size and complex gross–partial slip conditions on Ti–6Al–4V/Ti–6Al–4V fretting wear10.1016/j.triboint.2008.08.005 ↗
27. Contact size effect on fretting wear behaviour: Application to an AISI 52100/AISI 52100 interface10.1002/ls.74 ↗
28. Introduction of a power law formulation to quantify the contact size effects on friction and wear responses of dry oscillating sliding contacts: Application to a chromium steel interface10.1016/j.wear.2013.01.072 ↗
29. Contact size, frequency and cyclic normal force effects on Ti–6Al–4V fretting wear processes: An approach combining friction power and contact oxygenation10.1016/j.triboint.2016.12.049 ↗
30. The effect of contact geometry on fretting wear rates and mechanisms for a high strengthsteel10.1016/j.wear.2013.01.018 ↗
31. Modeling adhesive and abrasive wear phenomena in fretting interfaces: A multiphysics approach coupling friction energy, third body and contact oxygenation concepts10.1016/j.triboint.2021.107077 ↗
32. Study of size effects in fretting fatigue10.1016/j.triboint.2019.106087 ↗
33. Life prediction in multiaxial high cycle fretting fatigue10.1016/j.ijfatigue.2020.105504 ↗
34. Effect of high temperature on the characterization of fretting wear regimes at Ti6Al4V interfaces10.1016/j.wear.2005.03.011 ↗
35. Fretting wear of stainless steels under variable temperature conditions: Introduction of a ‘composite’ wear law10.1016/j.wear.2009.08.029 ↗
36. Interrelated effects of temperature and load on fretting behavior of SAF 2507 super duplex stainless steel10.1016/j.triboint.2019.03.042 ↗
37. The influence of oxides on the friction and wear of alloys10.1016/0301-679X(78)90178-0 ↗
38. The structure and mechanism of formation of the ‘glaze’ oxide layers produced on nickel-based alloys during wear at high temperatures10.1016/0010-938X(73)90030-9 ↗
39. Some frictional features associated with the sliding wear of the nickel-base alloy N80A at temperatures to 250 °C10.1016/0043-1648(94)90146-5 ↗
40. The effect of temperature on gross slip fretting wear of cold-sprayed nickel coatings on Ti6Al4V interfaces10.1016/j.triboint.2008.08.009 ↗
41. The role of triboparticulates in dry sliding wear10.1016/S0301-679X(98)00027-9 ↗
42. Optimization of Fretting Wear Parameters and Effect of High Temperature on Fretting Wear Behavior of Al6061 Alloy and Al6061-SiC Composite10.1007/s12633-021-01172-7 ↗
43. The mechanisms of gross slip fretting wear on nickel oxide/Ti6Al4V mated surfaces10.1016/j.wear.2009.11.004 ↗
44. Fretting Wear of SiC and Ni3Al Particles Reinforced Al Alloy Matrix Composites10.4028/www.scientific.net/KEM.351.75 ↗
45. Comparative study on the fretting wear property of 7075 aluminum alloys under lubricated and dry conditions10.1016/j.wear.2021.203760 ↗
46. Tribological behavior of Ni-based composite under distilled water lubrication10.1016/j.msea.2004.03.059 ↗
47. Subtractive manufacturing of stable hierarchical micro-nano structures on AA5052 sheet with enhanced water repellence and durable corrosion resistance10.1016/j.matdes.2019.108152 ↗
48. Corrosion wear behaviors of 2024Al in artificial rainwater and seawater at fretting contact10.1016/j.wear.2008.11.031 ↗
49. Investigation of the preparation and tribological behavior of a frictional interface covered with sinusoidal microchannels containing SnAgCu and Ti3SiC210.1016/j.triboint.2020.106368 ↗
50. Different aspects of the role of wear debris in fretting wear10.1016/S0043-1648(02)00044-3 ↗
51. On Fretting Maps10.1016/0043-1648(88)90134-2 ↗
52. Fundamental Investigations of Fretting Fatigue: (Part 2, Fretting Fatigue Testing Machine and Some Test Results)10.1299/jsme1958.12.180 ↗
53. Fundamental Investigations of Fretting Fatigue: (Part 5, The Effect of Relative Slip Amplitude)10.1299/jsme1958.12.692 ↗
54. Favrow, L., Werner, D., Pearson, D., Brown, K., Lutian, M., Annigeri, B., and Anton, D. (2000). Fretting Fatigue Testing Methodology Incorporating Independent Slip and Fatigue Stress Control, ASTM International.10.1520/STP14743S ↗
55. Anton, D., Lutian, M., Favrow, L., Logan, D., and Annigeri, B. (2000). The Effects of Contact Stress and Slip Distance on Fretting Fatigue Damage in Ti-6Al-4V/17-4PH Contacts, ASTM International.10.1520/STP14725S ↗
56. Effects of independent pad displacement on fretting fatigue behavior of Ti–6Al–4V10.1016/S0043-1648(02)00061-3 ↗
57. Influence of Contact Configuration on Fretting Fatigue Behavior of Ti-6Al-4V under Independent Pad Displacement Condition10.1016/S0142-1123(02)00041-5 ↗
58. Progress in fretting maps10.1016/j.triboint.2006.02.001 ↗
59. Mechanics of fretting fatigue10.1016/0043-1648(94)90173-2 ↗
60. Effect of Understress on Fretting Fatigue Crack Initiation of Press-Fitted Axle10.1299/jsmea.46.297 ↗
61. An elastic–plastic shakedown analysis of fretting wear10.1016/S0043-1648(00)00508-1 ↗
62. Friction/fretting-corrosion mechanisms: Current trends and outlooks for implants10.1016/j.matlet.2014.06.167 ↗
63. Ma, L., Eom, K., Geringer, J., Jun, T.-S., and Kim, K. (2019). Literature Review on Fretting Wear and Contact Mechanics of Tribological Coatings. Coatings, 9.10.3390/coatings9080501 ↗
64. Recent developments in the understanding of fretting fatigue10.1016/j.engfracmech.2005.01.013 ↗
65. An experimental investigation of fretting fatigue in Ti-6Al-4V: The role of contact conditions and microstructure10.1007/s11661-001-0124-8 ↗
66. Investigation into effects and interaction of various fretting fatigue variables under slip-controlled mode10.1016/j.triboint.2006.02.011 ↗
67. A fretting related damage parameter for fretting fatigue life prediction10.1016/j.ijfatigue.2014.12.003 ↗
68. Critical issues in high cycle fatigue10.1016/S0142-1123(99)00074-2 ↗
69. Suresh, S. (1998). Fatigue of Materials, Cambridge University Press.10.1017/CBO9780511806575 ↗
70. The influence of relative slip range and contact material on the fretting fatigue properties of 3.5NiCrMoV rotor steel10.1016/0043-1648(88)90199-8 ↗
71. Fretting Wear and Corrosion Behaviour of an Al–ZrO2/Ni Hybrid Composite Developed by Friction Stir Processing10.1007/s12666-022-02527-3 ↗
72. On the damage mechanisms of bending fretting fatigue10.1016/j.triboint.2013.12.018 ↗
73. Mechanisms of fretting-fatigue of titanium alloys10.1016/S0921-5093(97)00419-X ↗
74. Fretting debris and the delamination theory of wear10.1016/0043-1648(74)90019-2 ↗
75. An experimental study on bending fretting fatigue characteristics of 316L austenitic stainless steel10.1016/j.triboint.2010.11.013 ↗
76. Fretting fatigue10.1179/imr.1992.37.1.77 ↗
77. An investigation on rotatory bending fretting fatigue damage of railway axles10.1111/ffe.12085 ↗
78. Growth of fretting fatigue cracks in a shrink-fitted joint subjected to rotating bending10.1016/j.engfailanal.2007.04.003 ↗
79. Characterization of fretting damage in a press-fitted shaft below the fretting fatigue limit10.1016/j.proeng.2010.03.209 ↗
80. The analysis and prevention of failure in railway axles10.1016/S0142-1123(97)00096-0 ↗
81. Progression of fretting fatigue damage in Ti–6Al–4V10.1016/j.triboint.2006.02.009 ↗
82. Fretting fatigue behavior of Ti–6Al–4V under seawater environment10.1016/j.msea.2005.05.047 ↗
83. A new fretting fatigue testing machine design, utilizing rotating–bending principle approach10.1007/s00170-013-5457-0 ↗
84. Fabrication and wear characterization of silicon carbide and copper reinforced aluminium matrix composite10.1016/j.md.2018.01.002 ↗
85. Preparation & Characterization of Al-5083 Alloy Composites
86. AlSi11/Si3N4 Interpenetrating Composites Tribology Properties of Aluminum Matris Composites10.4236/ampc.2012.24B034 ↗
87. On the mechanisms of various fretting wear modes10.1016/j.triboint.2011.02.010 ↗
88. The role of debris in the fretting wear of a SiC reinforced aluminium alloy matrix composite10.1016/S0043-1648(00)00461-0 ↗
89. Stachowiak, G.W. (2006). Wear: Materials, Mechanisms and Practic, John Wiley & Sons.10.1002/9780470017029 ↗
90. Dry Sliding Wear Behaviour of Garnet Particles Reinforced Zinc–Aluminium Alloy Metal Matrix Composites
91. Evaluation of Wear and Corrosion Properties of AA6061/TiB2 Composites Produced by FSP Technique
92. Friction and wear maps of copper metal matrix composites with different iron volume content10.1016/j.triboint.2018.11.027 ↗
93. Dry sliding wear behavior of AA6061 aluminum alloy composites reinforced rice husk ash particulates produced using compocasting10.1016/j.jascer.2017.03.005 ↗
94. Wear Behaviour of Al-SiCp Metal Matrix Composites and Optimization Using Taguchi Method and Grey Relational Analysis
95. Effect of Rice Husk ash Reinforcements on Mechanical properties of Aluminium alloy (LM6) Matrix Composites10.1016/j.matpr.2017.12.205 ↗
96. Microscratching and fretting of electro-co-deposited Cr-based composite coatings with BN, graphene, and diamond reinforcements10.1007/s10853-020-05656-6 ↗
97. Micro and Nano Silver-Graphene Composite Manufacturing via Horizontal Vapor Phase Growth (HVPG) Technique10.4028/www.scientific.net/MSF.901.3 ↗
98. Quantitative evaluations for strain amplitude dependent organization of dislocation structures due to cyclic plasticity in austenitic stainless steel 316L10.1016/j.actamat.2008.02.005 ↗
99. Fatigue-damage evaluation in aluminum heat-transfer tubes by measuring dislocation cell-wall thickness10.1016/S0921-5093(01)01156-X ↗
100. Cyclic creep process in AISI 316L stainless steel in terms of dislocation patterns and internal stresses10.1016/j.actamat.2004.03.011 ↗