Investigation of the Biocompatibility of Laser Treated 316L Stainless Steel Materials
Source abstract
Abstract
In this study, 316L stainless steel materials, which are widely used in the industry, were produced by investment casting management. Depending on the microstructure, the hardness values constitute an important stage of the properties that can be developed and controlled. For this purpose, the differences between the microstructure and hardness properties of 316L stainless steel, which is produced by the investment casting method, and 316L stainless steel, which is currently used commercially, were examined. The changes caused by the fiber laser on the surface of 316L materials produced with two different production methods were examined. It was observed that the laser used made different changes in the surface structure of the 316L material produced by both methods. Since the surface of the material is a buffer between body fluids and biomaterial, it is known that there is a relationship between surface properties and biocompatibility. In this study, the L929 cell growth test, one of the cytotoxicity tests, was applied and thus, how laser surface treatment affects the biocompatibility of 316L materials produced by both methods was comparatively examined.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Metal and Thin Film Mechanics · Laser Material Processing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Vocational School of Health Services, Yozgat Bozok University, Yozgat 66200, Turkey
Department of Materials Science Engineering, Faculty of Engineering, Transportation Technologies Institute, Gebze Technical University, Kocaeli 41400, Turkey
References (39)
Show source-provided references
1. Davis, J. (2000). Stainless Steels, ASM International.
2. Tulbentci, K., and Kaluc, E. (1992). From Past to Present Stainless Steels, META.
3. Park, J., and Lakes, R.S. (2007). Biomaterials: An Introduction, Springer Science & Business Media.
4. Mechanical properties of AISI 316L austenitic stainless steels welded by GTAW10.4028/www.scientific.net/AMR.849.50 ↗
5. Wang, Z., Yang, S., Huang, Y., Fan, C., Peng, Z., and Gao, Z. (2021). Microstructure and Fatigue Damage of 316L Stainless Steel Manufactured by Selective Laser Melting (SLM). Materials, 14.10.3390/ma14247544 ↗
6. Beeley, P. (2001). Foundry Technology, Elsevier.
7. Clegg, A.J. (1991). Precision Casting Processes, Pergamon.
8. Aran, A. (2007). Casting Technology Manufacturing Methods Lecture Notes, Faculty of Mechanical Engineering, Istanbul Technical University.
9. Akman, E. (2012). Creation of Metallic Nanostructures with Femtosecond Laser and Their Biological Applications. [Ph.D. Thesis, Graduate School of Natural and Applied Sciences, University of Kocaeli].
10. Femtosecond laser structuring of titanium implants10.1016/j.apsusc.2007.03.006 ↗
11. Pinar, D. (2014). Numerical and Experimental Investigation of the Interaction of Metal Materials with Nanosecond Laser Beam. [Ph.D. Thesis, Graduate School of Natural and Applied Sciences, University of Kocaeli].
12. Li, B., Wang, T., Li, P., Wang, S., and Wang, L. (2021). Selective laser melting of 316L stainless steel: Influence of Co-Cr-Mo-W addition on corrosion resistance. Metals, 11.10.3390/met11040597 ↗
13. Naqavi, I.Z. (2001). Conduction and Non-Conduction Limited Laser Heating Process: Mathematical Simulation. [Ph.D. Thesis, King Fahd University of Petroleum and Minerals (Saudi Arabia)].
14. Percussion hole drilling of metals with a fourth-harmonic Nd: YAG laser studied by defocused laser speckle correlation10.1364/AO.44.003403 ↗
15. Femtosecond laser treatment of 316L improves its surface nanoroughness and carbon content and promotes osseointegration: An in vitro evaluation10.1016/j.colsurfb.2013.02.039 ↗
16. Femtosecond laser microstructuring of materials
17. Pulsed laser machining of thin films for microsensor development
18. Laser via ablation technology for MCM-D fabrication at IBM Microelectronics
19. Novel uses of lasers in atomic spectroscopyPresented at the 2000 Winter Conference on Plasma Spectrochemistry, Fort Lauderdale, FL, USA, January 10–15, 2000. Plenary Lecture10.1039/a910219l ↗
20. Metal nanoparticles generated by laser ablation10.1016/S0965-9773(98)00121-4 ↗
21. Surface nitridation of titanium by pulsed Nd: YAG laser irradiation10.1016/S0169-4332(01)00612-2 ↗
22. Pulsed-laser deposition of Si nanoclusters10.1016/S0169-4332(97)00659-4 ↗
23. Han, W. (2004). Computational and Experimental Investigations of Laser Drilling and Welding for Microelectronic Packaging, Worcester Polytechnic Institute.
24. Bertolotti, M. (1983). Laser annealing of semiconductors. Physical Processes in Laser-Materials Interactions, Springer.10.1007/978-1-4684-4322-6 ↗
25. Celen, S. (2011). Mechanical Morphological Characteristics of Implant Surfaces Created by Laser Surface Reconstruction. [Ph.D. Thesis, Graduate School of Natural and Applied Sciences, University of Ege].
26. Gruzd, S.A., Lomaev, S.L., Simakov, N.N., Gordeev, G.A., Bychkov, A.S., Gapeev, A.A., Cherepetskaya, E.B., Krivilyov, M.D., and Ivanov, I.A. (2022). Analysis of the Effect of Magnetic Field on Solidification of Stainless Steel in Laser Surface Processing and Additive Manufacturing. Metals, 12.10.3390/met12091540 ↗
27. Kulka, M., Mikołajczak, D., Dziarski, P., and Panfil-Pryka, D. (2021). Laser Surface Alloying of Austenitic 316L Steel with Boron and Some Metallic Elements: Properties. Materials, 14.10.3390/ma14112987 ↗
28. Corrosion resistance of powder injection moulded titanium in physiologic serum and artificial saliva
29. Ribeiro, L.M.S., Costa da Rosa Simões, L.A., Espanhol-Soares, M., Carvalho Teles, V., Ribeiro, T.A.N., Capellato, P., Vasconcelos Fré, L.V.B., Kuffner, B.H.B., Saddow, S.E., and Sachs, D. (2022). Surface Modification of Ti–30Ta Alloy by Deposition of P (VDF-TrFE)/BaTiO3 Coating for Biomedical Applications. Metals, 12.10.3390/met12091409 ↗
30. Hsu, H.J., Wu, C.Y., Huang, B.H., Tsai, C.H., Saito, T., Ou, K.L., Chuo, Y.C., Lin, K.L., and Peng, P.W. (2020). Surface characteristics and cell adhesion behaviors of the anodized biomedical stainless steel. Appl. Sci., 10.10.3390/app10186275 ↗
31. Kuffner, B.H.B., Capellato, P., Ribeiro, L.M.S., Sachs, D., and Silva, G. (2021). Production and Characterization of a 316L Stainless Steel/β-TCP Biocomposite Using the Functionally Graded Materials (FGMs) Technique for Dental and Orthopedic Applications. Metals, 11.10.3390/met11121923 ↗
32. AISI 316L-AISI 2205 welding capability of different stainless steel Pairs
33. Structure and mechanical properties of improved cast stainless steels for nuclear applications10.1016/j.jnucmat.2016.10.045 ↗
34. Cell physiological effects of glass ionomer cements on fibroblast cells10.1016/j.tiv.2019.104627 ↗
35. Orthodontic archwire composition and phase analyses by neutron spectroscopy10.4012/dmj.2016-206 ↗
36. Tian, K.V., Passaretti, F., Nespoli, A., Placidi, E., Condò, R., Andreani, C., Licoccia, S., Chass, G.A., Senesi, R., and Cozza, P. (2019). Composition―Nanostructure Steered Performance Predictions in Steel Wires. Nanomaterials, 9.10.3390/nano9081119 ↗
37. Lou, J., Ren, B., Zhang, J., He, H., Gao, Z., and Xu, W. (2022). Evaluation of Biocompatibility of 316L Stainless Steels Coated with TiN, TiCN, and Ti-DLC Films. Coatings, 12.10.3390/coatings12081073 ↗
38. Improvement of corrosion resistance and biocompatibility of 316L stainless steel for joint replacement application by Ti-doped and Ti-interlayered DLC films10.1016/j.surfcoat.2021.127734 ↗
39. In vitro bioactivity and corrosion properties of laser beam welded medical grade AISI 316L stainless steel in simulated body fluid10.1016/S1452-3981(23)16139-6 ↗