The Influence of Roughness of Surfaces on Wear Mechanisms in Metal–Rock Interactions

The processes of rock excavation and processing involve intense mechanical stresses on cutting, displacing, and transporting tools, inevitably leading to the phenomenon of dry friction wear. The factors influencing the intensity and mechanisms of wear are complex and interdependent, being conditioned by the physical–mechanical properties of the rocks, the geometric characteristics and materials of the tools, as well as the cutting process parameters (cutting force, feed rate). Previous studies have mainly addressed the global aspect of wear without delving into the microstructural evolution of the contact surfaces during the friction process. In this paper, through controlled tribometric tests, we have investigated in detail the abrasive wear mechanisms of metallic materials in contact with different types of rocks, with an emphasis on the role played by surface roughness and the mineralogical properties of the rocks. Experimentally, we varied the applied forces and the number of friction cycles to simulate different working conditions and evaluate how these parameters influence wear intensity and surface morphology evolution. Microstructural analysis of the samples, combined with roughness measurements, allowed the identification of the predominant degradation mechanisms (abrasion, adhesion, fatigue) and their correlation with the material properties and the friction process parameters. The results have shown a strong correlation between the wear capacity of rocks and their petrographic properties, such as hardness, porosity, and hard mineral content. It was also found that the roughness of the contact surfaces plays an essential role in wear mechanisms, influencing both the initiation and propagation of its effects. Depending on the experimental data, we have developed a classification of rocks based on their abrasive potential and proposed criteria for the optimal adoption of materials and working parameters for the tools of technological equipment depending on the type of rock encountered. The results of this study can contribute to improving the durability of tools, as well as mining equipment, and reducing operating costs.