The Preparation and Properties of Thick Bronze Coating Using Friction-Assisted Jet Electrodeposition
Source abstract
Abstract
In this study, a novel friction-assisted jet electrodeposition technology was applied to prepare bronze coating on 40CrNiMoA structural steel surfaces. The bronze electrode was designed with internal flow channels and nozzles, and the friction brushes made of alumina and silicon carbide were connected to the electrode surface. It was reported that the quality and deposition rate of the thick bronze coatings were significantly improved with friction-assisted jet electrodeposition. The roughness and microstructures were refined, and the deposition rate was up to 100 μm/h when the current density was 8 A/dm2. In addition, the chemical composition was related to current density as the content of tin in the bronze coating made with FJED decreased at a high current density. Moreover, the grain structures were α-CuSn in the solid-solution phase and the average grain size of FJED coatings was refined at a current density of 8 A/dm2.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Electrodeposition and Electroless Coatings · Advanced materials and composites · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
AVIC Jincheng Nanjing Engineering Institute of Aircraft System, Nanjing 211106, China
College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China
JITRI Institute of Precision Manufacturing, Nanjing 211805, China
Funding
Postgraduate Research and Practice Innovation Program of NUAA · AVIC Jincheng Nanjing Engineering Institute of Aircraft Systems
References (33)
Show source-provided references
1. Innovative Electrodeposition of Bimetallic Cu–Sn in a Stable Nonelectroactive Pyrophosphate-Based Bath: Reduction and Nucleation Growth Analysis10.1021/acs.jpcc.3c05505 ↗
2. Electrodeposition of graphite-bronze composite coatings and study of electroplating characteristics10.1016/j.surfcoat.2004.04.096 ↗
3. Wear and friction characteristics of electrodeposited graphite–bronze composite coatings10.1016/j.surfcoat.2004.04.092 ↗
4. Song, Z., and Tegus, O. (2023). The Corrosion Properties of Bronze Alloys in NaCl Solutions. Materials, 16.10.3390/ma16145144 ↗
5. Brass and bronze plating10.1016/S0026-0576(01)85278-8 ↗
6. Survey on fatigue strength of cast bronzes intended for marine propellers10.1111/ffe.12440 ↗
7. Yang, S., Song, K., Zhou, Y., Yang, R., Yu, Y., Liu, L., Chen, J., Zhou, F., Yang, W., and Zhang, G. (2023). Research Progress on Cu–15Ni–8Sn Alloys: The Effect of Microalloying and Heat Treatment on Microstructure and Properties. Materials, 16.10.3390/ma16175913 ↗
8. Manu, K., Jezierski, J., Ganesh, M., Shankar, K., and Narayanan, S. (2021). Titanium in cast Cu-Sn alloys—A review. Materials, 14.10.3390/ma14164587 ↗
9. Vetterick, G. (2010). Lead-Free, Bronze-Based Surface Layers for Wear Resistance in Axial Piston Hydraulic Pumps. [Master’s Thesis, Iowa State University].10.2172/1342566 ↗
10. Tribological behaviour of the steel/bronze friction pair (journal bearing type) functioning with selective mass transfer10.1016/j.ijheatmasstransfer.2018.03.107 ↗
11. Influence of pressure on tribological properties of multilayer surfacing welds of bronze CuSn6 padded onto steel substrate by means of the MIG method10.1080/09507116.2014.937594 ↗
12. A review of developments in the electrodeposition of tin-copper alloys10.1016/j.surfcoat.2016.06.065 ↗
13. Process selection for the fabrication of cavitation erosion-resistant bronze coatings by thermal and kinetic spraying in maritime applications10.1007/s11666-021-01206-x ↗
14. Selected properties of the micro electrical discharge alloying process using copper electrode on aluminum10.1016/j.trpro.2019.07.016 ↗
15. Electrodeposition of copper–tin alloy thin films for microelectronic applications10.1016/S0013-4686(02)00774-0 ↗
16. Bronze electrodeposition from an acidic non-cyanide high efficiency electrolyte: Tribological behavior10.1016/j.surfcoat.2014.05.046 ↗
17. Effect of parameters of pulse electrolysis on electrodeposition of copper–tin alloy from sulfate electrolyte10.1134/S1023193520090049 ↗
18. Electrodeposition of bronze–PTFE composite coatings and study on their tribological characteristics10.1016/j.surfcoat.2006.06.039 ↗
19. Pulsed electrodeposition and characterization of bronze-graphite composite coatings10.1016/j.surfcoat.2009.03.029 ↗
20. Electrodeposition of tin-rich Cu–Sn alloys from a methanesulfonic acid electrolyte10.1016/j.electacta.2012.12.053 ↗
21. Predictive modelling and optimisation of tin in electro-deposition of bronze using response surface methodology10.1504/IJCAET.2011.042365 ↗
22. Wear resistance of a Ni-PTFE composite coating strengthened with nano-SiC particles10.1088/2053-1591/ab320b ↗
23. Fabrication of superhydrophobic stainless-steel mesh for oil-water separation by jet electrodeposition10.1016/j.colsurfa.2022.129434 ↗
24. Study on the antibacterial and anti-corrosion properties of Ni-GO/Ni-rGO composite coating on manganese steel10.1016/j.surfcoat.2021.127681 ↗
25. Preparation of nickel parts by jet electro-deposition technique based on templates and grinding10.1016/S1452-3981(23)06766-4 ↗
26. Jet electrodeposition of Ni-SiO2 nanocomposite coatings with online friction and its performance10.1149/2.0241610jes ↗
27. Recent advances in energy field assisted hybrid electrodeposition and electroforming processes10.1016/j.cirpj.2022.05.013 ↗
28. Electrodeposition of nanocrystalline nickel assisted by flexible friction from an additive-free Watts bath10.1016/j.surfcoat.2015.03.012 ↗
29. Jet electrodeposition of nanocrystalline nickel assisted by controllable friction10.1016/j.surfcoat.2016.08.043 ↗
30. Jet electrodeposition with movable, flexible friction on quality of nanocrystalline nickel coatings10.1080/02670836.2017.1400238 ↗
31. Elimination of liquid metal embrittlement cracks during arc cladding of tin bronze on steel sheet10.1016/j.matlet.2020.127646 ↗
32. Zhang, Z., Konoplianchenko, I., Tarelnyk, V., Liu, G., Du, X., and Yu, H. (2022). The Characterization of Running-In Coatings on the Surface of Tin Bronze by Electro-Spark Deposition. Coatings, 12.10.3390/coatings12070930 ↗
33. Study on the effect of multiple laser shock peening on residual stress and microstructural changes in modified 9Cr-1Mo (P91) steel10.1016/j.surfcoat.2018.11.027 ↗