Comparison and Selection of Data Processing Methods for the Application of Cr3+ Photoluminescence Piezospectroscopy to Thermal Barrier Coatings

Thermal barrier coatings (TBCs) are an indispensable part of the blades used in aeroengines. Under a high-temperature service environment, the thermal oxidation stress at the interface is the main cause of thermal barrier failure. Cr3+ photoluminescence piezospectroscopy has been successfully used to analyze the thermal oxidation stress of TBCs, but systematic and quantitative analysis results for use in data processing are still lacking, especially with respect to the identification of peak positions. The processing methods used to fit spectral data were studied in this work to accurately characterize TBC thermal oxidation stress using Cr3+ photoluminescence spectroscopy. Both physical and numerical experiments were carried out, where Cr3+ photoluminescence spectra were detected from alumina ceramic samples under step-by-step uniaxial loading, and the simulated spectra were numerically deduced from the measured spectral data. Then, the peak shifts were obtained by fitting all spectral data by using Lorentzian, Gaussian and Psd-Voigt functions. By comparing the fitting results and then discussing the generation mechanism, the Lorentzian function—not the Psd-Voigt function that is most widely utilized—was regarded as the most applicable method for the application of Cr3+ photoluminescence piezospectroscopy to TBCs because of its sufficient sensitivity, stability and confidence for quantitative stress analysis.