Evolutionary Mechanism of Solidification Behavior in the Melt Pool During Disk Laser Cladding with 316L Alloy

Laser cladding is an emerging environmentally friendly surface-strengthening technology. During the cladding process, the changes in molten pool temperature and velocity directly affect the solidification process and element distribution. The quantitative revelation of the directional solidification mechanism in the molten pool during the cladding process is crucial for enhancing the quality of the cladding layer. In this study, a multi-field coupling numerical model was developed to simulate the coating process of 316L powder on 45 steel matrices using a disk laser. The instantaneous evolution law of the temperature and flow fields was derived, providing input conditions for simulating microstructure evolution in the molten pool’s paste zone. The behavior characteristics of the molten pool were predicted through numerical simulation, and the microstructure evolution was simulated using the phase field method. The phase field model reveals that dendrite formation in the molten pool follows a sequence of plane crystal growth, cell crystal growth, and columnar crystal growth. The dendrites can undergo splitting to form algal structures under conditions of higher cooling rates and lower temperature gradients. The scanning speed of laser cladding (6 mm/s) has minimal impact on dendrite growth; instead, convection within the molten pool primarily influences dendrite growth and tilt and solute distribution.