Influence of a Biocompatible Hydrophilic Needle Surface Coating on a Puncture Biopsy Process for Biomedical Applications
Source abstract
Abstract
A puncture biopsy is a widely used, minimally invasive surgery process. During the needle insertion process, the needle body is always in direct contact with a biological soft tissue. Tissue adhesion and different degrees of tissue damage occur frequently. Optimization of the needle surface, and especially the lubrication of the needle surface, can deal with these problems efficiently. Therefore, in this paper, a biocompatible hydrophilic coating was applied onto the surface of a needle to improve the surface quality of the needle surface. Further, a simplified finite element model of insertion was established, and extracorporeal insertion experiments were used to verify the accuracy of the model. Then, by analyzing a simulation model of a coated needle and a conventional needle, the influence of the application of the coated needle on the insertion process was obtained. It can be seen from the results that the coating application relieved the force on the needle and the soft tissue during the insertion process and could significantly reduce friction during the insertion process. At the same time, the deformation of biological soft tissue was reduced, and the adhesion situation between the needle and tissue improved, which optimized the puncture needle.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Soft Robotics and Applications · Surgical Sutures and Adhesives · Orthopedic Infections and Treatments
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, School of Mechanical Engineering, Shandong University, Jinan 250061, China
National Demonstration Center for Experimental Mechanical Engineering Education,Shandong University, Jinan 250061, China
College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China
Funding
Fundamental Research Fund of Shandong University · Taishan Scholar Foundation of Shandong Province · Natural Science Outstanding Youth Fund of Shandong Province
References (34)
Show source-provided references
1. Minimally invasive cardiac surgery: A systematic review and meta-analysis10.1016/j.ijcard.2016.08.227 ↗
2. Yang, C., Xie, Y., Liu, S., and Sun, N. (2018). Force modeling, identification, and feedback control of robot-assisted needle insertion: A survey of the literature. Sensors, 18.10.3390/s18020561 ↗
3. Effect of minimally invasive surgery on the risk for surgical site infections results from the national surgical quality improvement program (nsqip) database10.1001/jamasurg.2014.292 ↗
4. Comparison Between Minimally Invasive Surgery and Conventional Open Surgery for Patients with Spinal Metastasis10.1097/BRS.0000000000001893 ↗
5. Study of the effect of cannula rotation on tissue cutting for needle biopsy10.1016/j.medengphy.2013.05.001 ↗
6. Simone, C., and Okamura, A.M. (2002, January 11–15). Modeling of needle insertion forces for robot-assisted percutaneous therapy. Proceedings of the IEEE International Conference on Robotics and Automation CRA 2002, Washington, DC, USA.
7. Zhao, C., Zeng, Q., and Liu, H. (2012, January 6–8). Soft tissue deformation ANSYS simulation of robot-assisted percutaneous surgery. Proceedings of the 10th World Congress on Intelligent Control and Automation, Beijing, China.10.1109/WCICA.2012.6359064 ↗
8. Nagahanumaiah Modelling of Cutting Force and Deflection of Medical Needles with Different Tip Geometries10.1016/j.mspro.2014.07.535 ↗
9. Butnariu, S., Girbacia, T., and Girbacia, F. (2017, January 22–24). An analysis on tissue deformation during robotic biopsy needle insertion. Proceedings of the 2017 E-Health and Bioengineering Conference (EHB), Sinaia, Romania.10.1109/EHB.2017.7995399 ↗
10. Biomechanical simulation of needle insertion into cornea based on distortion energy failure criterion
11. Using Simulation to Help Specify Design Parameters for Vacuum-Assisted Needle Biopsy Systems
12. Using Simulation to Study Cutting Force in Biopsy Needle Insertion With Bi-Directional Rotation10.1142/S0219519419400207 ↗
13. A computational approach to investigate optimal cutting speed configurations in rotational needle biopsy cutting soft tissue10.1080/10255842.2018.1535060 ↗
14. Simulation of biopsy bevel-tipped needle insertion into soft-gel10.1016/j.compbiomed.2019.103337 ↗
15. Helical-Tip Needle for Transthoracic Percutaneous Image-Guided Biopsy of Lung Tumors: Results of a Pilot Prospective Comparative Study with a Standard Tru-Cut Needle10.1007/s00270-017-1585-5 ↗
16. Frasson, L., Parittotokkaporn, T., Schneider, A., Davies, B., Vincent, J., Huq, S., Degenaar, P., and Baena, F.R. (2008, January 21–24). Biologically inspired microtexturing: Investigation into the surface topography of next-generation neurosurgical probes. Proceedings of the 30th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, Vancouver, BC, Canada.10.1109/IEMBS.2008.4650486 ↗
17. Biomimetic microtexturing for neurosurgical probe surfaces to influence tribological characteristics during tissue penetration10.1016/j.mee.2009.02.027 ↗
18. Microtextured Surfaces for Deep-Brain Stimulation Electrodes: A Biologically Inspired Design to Reduce Lead Migration10.1016/j.wneu.2011.06.040 ↗
19. Fabrication of coated polymer microneedles for transdermal drug delivery10.1016/j.jconrel.2017.03.383 ↗
20. Porous polymer coatings on metal microneedles for enhanced drug delivery10.1098/rsos.171609 ↗
21. Coating flexible probes with an ultra fast degrading polymer to aid in tissue insertion10.1007/s10544-015-9927-z ↗
22. Cutting characteristics of porcine tenderloin tissue along tangential direction of surface10.1007/s00170-017-0304-3 ↗
23. Marieb, E., and Hoehn, K. (2010). Human Anatomy & Physiology, Pearson Education.
24. Hyperelastic Energy Densities for Soft Biological Tissues: A Review10.1007/s10659-014-9508-z ↗
25. Mechanical models of artery walls10.1007/s11831-007-9015-5 ↗
26. An anisotropic inelastic constitutive model to describe stress softening and permanent deformation in arterial tissue10.1016/j.jmbbm.2012.03.001 ↗
27. Mechanical characterization of the softening behavior of human vaginal tissue10.1016/j.jmbbm.2010.10.006 ↗
28. A comparison among Neo-Hookean model, Mooney-Rivlin model, and Ogden model for chloroprene rubber10.1007/s12541-012-0099-y ↗
29. Development of a new tissue-equivalent material applied to optimizing surgical accuracy10.1016/j.msec.2013.05.001 ↗
30. Evaluation of the friction coefficient, the radial stress, and the damage work during needle insertions into agarose gels10.1016/j.jmbbm.2015.11.024 ↗
31. A Mechanics-Based Model for 3-D Steering of Programmable Bevel-Tip Needles10.1109/TRO.2018.2879584 ↗
32. Coefficient: In Vivo Human Skin Friction Comparison10.1111/j.1600-0846.2004.00085.x ↗
33. A review of cutting mechanics and modeling techniques for biological materials10.1016/j.medengphy.2017.04.004 ↗
34. Study on design and cutting parameters of rotating needles for core biopsy10.1016/j.jmbbm.2018.06.013 ↗