journal article·2017-04-26Open access

Field Evaluation of Red-Coloured Hot Mix Asphalt Pavements for Bus Rapid Transit Lanes in Ontario, Canada

Qingfan Liu, Sina Varamini, Susan Tighe

Coatings· Volume 7· Issue 5

Abstract

Coloured pavements have been implemented by metropolitan areas to denote dedicated lanes for bus rapid transit to maintain a high level of safety. Transit benefits of these installations are well documented. However, field performance of various types of coloured pavement has not been investigated systematically, with questions not being answered. In collaboration with the Regional Municipality of York (ON, Canada) where red pavement sections have been in operation for years for its bus rapid transit lanes, the Centre for Pavement and Transportation Technology at the University of Waterloo (Waterloo, ON, Canada) assessed the performance of various types of red pavements including epoxy paint and red asphalt mixes. It was found that, with significant lower texture depth, epoxy paint surface has disadvantages to red asphalt pavement from a pavement texture and safety perspective. The red asphalt sections in this study were observed as lower yet compatible frictional levels to conventional black pavement. Various types of contamination onto the red pavement were observed during field survey. In addition, the ultraviolet radiation degraded the colour of red asphalt pavement over time and may make it less effective for lane designation. Long-term monitoring is recommended to evaluate the functional and structural performance of red asphalt pavement.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Concrete and Cement Materials Research · Infrastructure Maintenance and Monitoring

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Centre for Pavement and Transportation Technology, University of Waterloo, Waterloo, ON N2L 3G1, Canada

McAsphalt Industries Limited, Toronto, ON M1B 5R4, Canada

References (15)

Show source-provided references
1. Assoc, N.N.C. (2017, April 22). Seattle Transit Master Plan Briefing Book, Available online: http://www.seattle.gov/transportation/docs/tmp/briefingbook/SEATTLE%20TMP%200%20COVER%20TOC.pdf.
2. Birk, M., Burchfield, R., and Flecker, J. (1999). Portland’s Blue Bike Lanes: Improved Safety through Enhanced Visibility, UNC Highway Safety Research Center, City of Portland Office of Transportation.
3. Carry, M., Donnell, E., Rado, Z., Hartman, M., and Steven, S.S. (2017, April 22). Red Bus Lane Treatment Evaluation. Available online: http://nacto.org/docs/usdg/red_bus_lane_evaluation_carry.pdf.
4. Laboratory Evaluation of Color Polymer Concrete Pavement with Synthetic Resin Binder for Exclusive Bus Lanes10.3141/1991-15 ↗
5. Synnefa, A. (2009, January 19–23). Measurement of Optical Properties and Thermal Performance of Coloured Thin Layer Asphalt Samples and Evaluation of Their Impact on the Urban Environment. Proceedings of the Second International Conference on Countermeasures to Urban Heat Islands, Berkeley, CA, USA.
6. Liu, Q., and Shalaby, A. (2015). Relating concrete pavement noise and friction to three-dimensional texture parameters. Int. J. Pavement Eng.10.1080/10298436.2015.1095897 ↗
7. Liu, Q., Tighe, S., and Shalaby, A. (2017, April 22). Assessment of Airfield Runway Macrotexture and Friction Using Three-Dimensional Laser-Based Measurement. Available online: http://docs.trb.org/prp/17-01393.pdf.
8. Varamini, S., Farashah, M.K., El-Hakim, M., and Tighe, S.L. (2017, April 22). Coloured Asphalt Bus Rapid Transit Lanes in the Regional Municipality of York: Integrating Laboratory Performance Testing into Sustainable Pavement Asset Management. Available online: http://www.tac-atc.ca/sites/tac-atc.ca/files/conf_papers/varamini_0.pdf.
9. (2017, April 22). Ontario provincial standards specification (OPSS), Available online: http://www.raqsb.mto.gov.on.ca/techpubs/OPS.nsf/OPSHomepage.
10. (2013). Operation Manual, LS-40 Pavement Surface Analyzer, HyMIT LLC. Version 1002.05.20.
11. Liu, Q., Gonzalez, M., Tighe, S.L., and Shalaby, A. (2016). Three-dimensional surface texture of Portland cement concrete pavements containing nanosilica. Int. J. Pavement Eng.10.1080/10298436.2016.1231520 ↗
12. ASTM E303. (American Society for Testing and Materials) (1993). Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester, ASTM International.
13. Hall, J.W., Smith, K.L., Titus-Glover, L., and Wambold, J.C. (2017, April 22). Guide for Pavement Friction. Available online: http://redlightrobber.com/red/links_pdf/Guide-for-Pavement-Friction-NCHRP-108.pdf.
14. (2010). ASTM D7460–10–Standard Test Method for Determining Fatigue Failure of Compacted Asphalt Concrete Subjected to Repeated Flexural Bending, ASTM International.
15. (2017, April 22). Effect of Colouring pigment on Asphalt Mixture Performance: Case for use in Ontario. Available online: https://trid.trb.org/view.aspx?id=1393441.