Owens–Wendt Characterization of Femtosecond-Laser-Textured Hydrophobic Aluminum Surfaces

The eligibility of applying the Owens–Wendt approach to determining the free surface energy of liquid-repellent aluminum surfaces, with micro- and nanotextures formed by a femtosecond laser, was considered. This approach has been shown to be applicable using two essential parameters that can be derived from the graphs. The first is related to the fraction of the contact area between the liquid and the solid surface in the Cassie state. The second is related to the degree of intrinsic polarity of the surface material or the applied organic modifier. The presented interpretation was used to compare the liquid repellency of the obtained textures. A microtexture with a period of 60 μm and a groove width of 45 μm has been shown to be the most liquid repellent. Among the modifiers, 1H,1H,2H,2H-perfluoroctyltriethoxysilane was the most effective, and stearic acid was only slightly inferior, but promising in terms of cost and environmental friendliness. It was shown that spontaneous hydrophobization provided a contact angle with water up to 159°, but the stability of such textures was inferior to the considered modifiers.