Study of Electrodeposition and Properties of Composite Nickel Coatings Modified with Ti3C2TX MXene
Source abstract
Abstract
In this work we have synthesized Ti3C2TX MXene powder and studied its structure. Composite electrochemical coatings (CECs) of Ni-Ti3C2TX MXene were obtained from a sulfate– chloride bath in the galvanostatic regime. The microstructure of CEC was researched using X-ray phase analysis and scanning electron microscopy methods. It has been established that a Ni–Ti3C2TX MXene CEC microhardness rises by about 1.80 times compared with electrolytic Ni without a dispersed phase. For corrosion research, different corrosive media is applied. The corrosion–electrochemical behavior of Ni–Ti3C2TX MXene CECs by the chronovoltamperometry method in 0.5 M H2SO4 solution has been investigated. Trials in 3.5% NaCl have shown that Ti3C2TX MXene inclusion into the matrix of the electrochemical Ni results in a decrease in the corrosion rate by 1.60–1.75 times. These effects are due to the addition of Ti3C2TX MXene into the nickel matrix and the formation of CECs with a strengthening fine-grained structure.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: MXene and MAX Phase Materials · Aluminum Alloys Composites Properties · Advanced Memory and Neural Computing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Engels Technological Institute (Branch), Yuri Gagarin State Technical University of Saratov, 17 Svobody Square, 413100 Engels, Saratov Region, Russia
Department of Chemistry and Technology of Materials, Yuri Gagarin State Technical University of Saratov, 77 Polytecnicheskaya Street, 410054 Saratov, Saratov Region, Russia
Funding
synthesis, SEM and XRD of MXene the Russian Science Foundation
References (35)
Show source-provided references
1. Recent developments in the electrodeposition of nickel and some nickel-based alloys10.1007/s10800-006-9162-7 ↗
2. Electrodeposition of nickel matrix composite coatings via various boride particles: A review
3. Composite coatings modified with nanoparticles: Structure and properties10.1134/S1995078014010145 ↗
4. Study of fabrication and wear properties of Ni–SiC composite coatings on A356 aluminum alloy10.1016/j.wear.2021.203772 ↗
5. Fabrication of robust Ni-based TiO2 composite@TTOS superhydrophobic coating for wear resistance and anti-corrosion10.1016/j.colsurfa.2021.127394 ↗
6. Synthesis, structure, and properties of superhydrophobic nickel–PTFE nanocomposite coatings made by electrodeposition10.1016/j.surfcoat.2015.08.022 ↗
7. Colloidal dispersion of fullerene C60 free of organic solvents10.1134/S1070427206020315 ↗
8. Electrodeposition of nickel-fullerene C60 composition coatings10.1134/S0033173207040121 ↗
9. Investigation of the microstructure and tribological properties of CNTs/Ni composites prepared by electrodeposition10.1088/2053-1591/ac5c2b ↗
10. Electrochemical deposition and properties of composite coatings consisting of zinc and carbon nanotubes10.1134/S1070427215020135 ↗
11. Pulsed electrodeposition of composite coatings based on zinc–nickel alloy10.1134/S2070205118030188 ↗
12. The microstructure, wear and electrochemical properties of electrodeposited Ni-diamond composite coatings: Effect of diamond concentration10.1016/j.mtcomm.2023.105476 ↗
13. Effect of surfactant concentration in electrolyte on the fabrication and properties of nickel-graphene nanocomposite coating synthesized by electrochemical co-deposition10.1039/C7RA13651J ↗
14. Ni-graphene oxide composite coatings: Optimum graphene oxide for enhanced corrosion resistance10.1016/j.compositesb.2019.107145 ↗
15. Study on the antibacterial and anti-corrosion properties of Ni-GO/Ni-rGO composite coating on manganese steel10.1016/j.surfcoat.2021.127681 ↗
16. Two-dimensional nanocrystals produced by exfoliation of Ti3AlC210.1002/adma.201102306 ↗
17. Chemical Preparation of New Ti3C2MXene and the Performance and Mechanism of Memristor Based on MXene
18. Ethanol Solution Plasma Loads Carbon Dots onto 2D HNb3O8 for Enhanced Photocatalysis10.1021/acsami.2c18551 ↗
19. Synergism of 1D CdS/2D Modified Ti3C2Tx MXene Heterojunctions for Boosted Photocatalytic Hydrogen Production
20. Recent progress on Two-Dimensional Materials10.3866/PKU.WHXB202108017 ↗
21. MXenes-Based Functional Fibers and Their Applications in the Intelligent Wearable Field10.3866/PKU.WHXB202204058 ↗
22. Porous MXenes: Synthesis, structures, and applications10.1016/j.nantod.2019.100803 ↗
23. Ten Years of Progress in the Synthesis and Development of MXenes10.1002/adma.202103393 ↗
24. Introduction to MXenes: Synthesis and characteristics10.1016/j.mtchem.2019.08.010 ↗
25. Synthesis, structure, properties and applications of MXenes: Current status and perspectives10.1016/j.ceramint.2019.06.114 ↗
26. Functional Mxene Materials: Progress of Their Applications10.1002/asia.201800543 ↗
27. Perspectives of 2D MXene Tribology10.1002/adma.202207757 ↗
28. MXenes in tribology: Current status and perspectives10.1016/j.apmate.2022.100092 ↗
29. One-step electrodeposition of polypyrrole/Ti3C2Tx MXene composite coating for 304SS bipolar plates in PEMFC10.1016/j.surfcoat.2023.129460 ↗
30. Electrodeposition of a Ni-P-Ti3C2Tx/MoS2 coating incorporating MoS2 intercalated Ti3C2Tx particles10.1016/j.surfcoat.2018.08.090 ↗
31. Preparation of Ni-P-Ti3C2Tx-Ce composite coating with enhanced wear resistance and electrochemical corrosion behavior on the surface of low manganese steel10.1016/j.surfcoat.2022.128508 ↗
32. Ambient-stable polyethyleneimine functionalized Ti3C2Tx nanohybrid corrosion inhibitor for copper in alkaline electrolyte10.1016/j.matlet.2023.133979 ↗
33. Molten salt synthesis of MAX phases in the Ti-Al-C system10.1016/j.jeurceramsoc.2018.06.034 ↗
34. The role of nickel in mechanical perfopmance and corrosion behaviour of nickel-aluminium bronze in 3.5 wt.% NaCl solution10.1016/j.corsci.2018.05.012 ↗
35. Microstructural evolution and corrosion behavior of Zn-Ni-graphene oxide composite coatings10.1007/s11661-019-05474-9 ↗