Improving the Surface Friction and Corrosion Resistance of Magnesium Alloy AZ31 by Ion Implantation and Ultrasonic Rolling
Source abstract
Abstract
The use of the magnesium alloy AZ31 is common in aviation and biomedicine; however, this alloy has poor friction and corrosion resistance. Here, mechanical grinding, ultrasonic rolling, and ultrasonic rolling + ion implantation were performed on the magnesium alloy surface to study the effect of the treatment process on the friction and corrosion resistance of the magnesium alloy surface. The results show that the surface roughness of the magnesium alloy treated by ultrasonic rolling + ion injection is reduced more than mechanical grinding and ultrasonic rolling. The friction coefficient is the lowest, the wear resistance is the best, and new phase nitrogen compounds appear on the surface. The results of SBF (simulated body fluid) solution immersion showed that the sample treated via this composite process had the lowest corrosion rate, which was 62.45% and 58.47% lower than that of the mechanically ground samples. The surface was relatively intact after the corrosion test, and the corrosion resistance was the best. These results can provide a new strategy for magnesium alloy surface protection.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
College of Physics and Electronic Science, Anshun University, Anshun 561000, China
Funding
Youth Growth Project of The Education Department of Guizhou Province · Key Laboratory of Materials Simulation and Computing of Anshun University · Key Supporting Discipline of Materials and Aviation of Anshun College · National Undergraduate Innovation and Entrepreneurship Training Program of China
References (42)
Show source-provided references
1. Fundamentals and advances in magnesium alloy corrosion10.1016/j.pmatsci.2017.04.011 ↗
2. Research and application development of advanced magnesium alloys
3. Achieving high strength-ductility in a wrought Mg–9Gd–3Y–0.5Zr alloy by modifying with minor La addition10.1016/j.jallcom.2021.161062 ↗
4. Effect of heat treatment on microstructure, mechanical, corrosion and biocompatibility of Mg-Zn-Zr-Gd-Nd alloy10.1016/j.jallcom.2019.153462 ↗
5. Correlation between the crystallized structure of Mg67Zn28Ca5 amorphous alloy and the corrosion behavior in simulated body fluid10.1016/j.jnoncrysol.2020.120473 ↗
6. Fabrication of calcium phosphate coating on pure magnesium substrate via simple chemical conversion coating: Surface properties and corrosion performance evaluations10.1016/j.jmrt.2018.06.017 ↗
7. Corrosion resistance and biocompatibility of polydopamine/hyaluronic acid composite coating on AZ31 magnesium alloy10.1016/j.surfin.2020.100560 ↗
8. Jamari, J., Ammarullah, M.I., Santoso, G., Sugiharto, S., Supriyono, T., Prakoso, A.T., Basri, H., and van der Heide, E. (2022). Computational contact pressure prediction of CoCrMo, SS 316L and Ti6Al4V femoral head against UHMWPE acetabular cup under gait cycle. J. Funct. Biomater., 13.10.3390/jfb13020064 ↗
9. An investigation of surface nanocrystallization mechanism in Fe induced by surface mechanical attrition treatment10.1016/S1359-6454(02)00310-5 ↗
10. Effect of surface mechanical attrition treatment on tribological behavior of the AZ31 alloy10.1016/j.jmst.2016.05.018 ↗
11. Microstructure, mechanical and corrosion properties of magnesium alloy bone plate treated by high-energy shot peening10.1016/S1003-6326(19)65071-5 ↗
12. Surface layer microstructures and wear properties modifications of Mg-8Gd-3Y alloy treated by shot peening10.1016/j.matchar.2019.109952 ↗
13. Effect of laser shock peening on tribological properties of magnesium alloy ZK6010.1016/j.triboint.2019.106138 ↗
14. Wear behavior of nanocrystalline structured magnesium alloy induced by surface mechanical attrition treatment10.1016/j.surfcoat.2014.11.026 ↗
15. Effects of high energy shot peening for magnesium alloy AZ31 on the corrosion properties and microhardness
16. Effect of Surface Ultrasonic Rolling Treatment on Fatigue Properties of AISI304 Stainless Steel
17. Experimental Research on Surface Rolling Strengthening of ZK60 Magnesium Alloy
18. Effect of ultrasonic surface rolling on friction and wear properties of AZ31B magnesium alloy
19. Research Status of Ultrasonic Surface Rolling Nanotechnology
20. Wear and corrosion resistance of Al ion implanted AZ31 magnesium alloy10.1016/j.surfcoat.2006.07.091 ↗
21. Effect of Zr ion implantation on wear and corrosion resistance of magnesium alloy
22. Corrosion resistance properties of AZ31 magnesium alloy after Ti ion implantation10.1016/S1001-0521(07)60174-0 ↗
23. Corrosion resistance and mechanical property of AZ31 magnesium alloy by N/Ti duplex ion implantation10.1016/j.surfcoat.2012.04.038 ↗
24. Effect of surface nanocrystallization pretreatment on tribological properties of nitrogen layers of 316L stainless steel
25. Effect of gradient nanostructures on tribological properties of 316L stainless steel with high energy ion implantation tungsten carbide10.1080/10402004.2018.1508797 ↗
26. (1990). ASTM G31-72Standard Practice for Laboratory Immersion Corrosion Testing of Metals.
27. Effect of cryogenic treatment on microstructure and mechanical properties of AZ31 magnesium alloy Sheet after Rolling
28. Zhao, X.H., Liu, K.C., Xu, D.S., Liu, Y., and Hu, C.H. (2020). Effects of ultrasonic surface rolling processing and subsequent recovery treatment on the wear resistance of AZ91D Mg alloy. Materials, 13.10.3390/ma13245705 ↗
29. Hall-petch relationship in Mg alloys: A review10.1016/j.jmst.2017.07.022 ↗
30. Quantitative study of the effect of grain boundary parameters on the slip system level Hall-Petch slope for basal slip system in Mg-4Al10.1016/j.actamat.2020.08.079 ↗
31. Effect of ultrasonic surface rolling process on mechanical properties and corrosion resistance of AZ31B Mg alloy10.1016/j.surfcoat.2019.05.035 ↗
32. Wear and corrosion resistance of AZ31 magnesium alloy irradiated by high-intensity pulsed ion beam10.1016/j.nimb.2008.06.030 ↗
33. Degradation of AZ31 and AZ91 magnesium alloys in different physiological media: Effect of surface layer stability on electrochemical behaviour10.1016/j.jma.2020.02.014 ↗
34. Corrosion behavior of Mg, AZ31, and AZ91 alloys in dilute NaCl solutions10.1007/s10008-010-1020-1 ↗
35. Influence of texture on corrosion rate of AZ31 Mg alloy in 3.5 wt.% NaCl10.1016/j.matdes.2011.04.031 ↗
36. Effect of Laser Shock-Ultrasonic Rolling Composite Process on Mechanical Properties of AZ91D Magnesium Alloy
37. Effect of micro crystallization on corrosion resistance of AZ91D alloy10.1016/j.electacta.2005.08.023 ↗
38. Influence of ultrasonic shot peening on corrosion behavior of 7075 aluminum alloy10.1016/j.jallcom.2017.06.310 ↗
39. The improvement of the corrosion resistance of 309 stainless steel in the transpassive region by nano-crystallization10.1016/j.electacta.2008.08.073 ↗
40. A Study of Effect of Nitrogen Implantation on Corrosion Properties of Ti-Al-Zr Alloy
41. Research progress on surface modification technology of magnesium alloy ion implantation
42. Influence of residual stress on local corrosion behavior of metal materials