Research and Development on Cold-Sprayed MAX Phase Coatings
Source abstract
Abstract
Cold spraying is an attractive solid-state processing technique in which micron-sized solid particles are accelerated towards a substrate at high velocities and relatively low temperatures to produce a coating through deformation and bonding mechanisms. Metal, ceramic, and polymer powders can be deposited to form functional coatings via cold spraying. MAX phase coatings deposited via cold spraying exhibit several advantages over thermal spraying, avoiding tensile residual stresses, oxidation, undesirable chemical reactions and phase decomposition. This paper presents a review of recent progress on the cold-sprayed MAX phase coatings. Factors influencing the formation of coatings are summarized and discussions on the corresponding bonding mechanisms are provided. Current limitations and future investigations in cold-sprayed MAX coatings are also listed to facilitate the industrial application of MAX phase coatings.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: MXene and MAX Phase Materials · Advanced ceramic materials synthesis · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Center of Materials Science and Engineering, School of Mechanical and Electronic Control Engineering, Beijing Jiaotong University, Beijing 100044, China
Funding
National Natural Science Foundation of China · Pre-Research Program of the National 14th Five-Year Plan
References (63)
Show source-provided references
1. From Structural Ceramics to 2D Materials with Multi-Applications: A Review on the Development from MAX Phases to MXenes10.1007/s40145-021-0535-5 ↗
2. The Mn+1AXn phases: A new class of solids10.1016/S0079-6786(00)00006-6 ↗
3. Progress in research and development on MAX phases: A family of layered ternary compounds10.1179/1743280410Y.0000000001 ↗
4. Synthesis and Characterization of Ternary Layered Nb2SB Ceramics Fabricated by Spark Plasma Sintering10.1016/j.jallcom.2021.160344 ↗
5. Layered ternary MAX phases and their MX particulate derivative reinforced metal matrix composite: A review10.1016/j.jallcom.2020.157313 ↗
6. Ti2AlC coatings deposited by high velocity oxy-fuel spraying10.1016/j.surfcoat.2008.06.184 ↗
7. Microstructure and performance of Cr2AlC coatings deposited by HVOF spraying
8. Microindentation and inverse analysis to characterize elastic-plastic properties for thermal sprayed Ti2AlC and NiCoCrAlY10.1007/s11666-009-9310-9 ↗
9. Microstructure of high velocity oxy-fuel sprayed Ti2AlC coatings10.1007/s10853-010-4263-4 ↗
10. MAX-phase coatings produced by thermal spraying10.3103/S1063457617050082 ↗
11. Kerosene-fuelled high velocity oxy-fuel (HVOF) spray of Ti2AlC MAX phase powders10.1016/j.jallcom.2017.11.157 ↗
12. Villafuerte, J. (2015). Modem Cold Spray-Materials, Process and Application, Springer International Publishing. [1st ed.].10.1007/978-3-319-16772-5 ↗
13. Cold-sprayed coatings: Microstructure, mechanical properties, and wear behaviour10.1016/j.pmatsci.2021.100839 ↗
14. Deposition of metallic coatings on polymer surfaces using cold spray10.1016/j.surfcoat.2010.08.128 ↗
15. A comparison of cold spray technique to single particle micro-ballistic impacts for the deposition of polymer particles on polymer substrates10.1016/j.surfcoat.2018.07.053 ↗
16. Optimization of cold spray deposition of high-density polyethylene powders10.1007/s11666-017-0627-5 ↗
17. Formation of cold-sprayed titanium dioxide layers on metal surface10.1007/s11666-010-9563-3 ↗
18. Thin film coatings of WO3 by cold gas dynamic spray: A technical note10.1361/105996304523791 ↗
19. SiO2 and MoSi2 formation on Inconel 625 surface via SiC coating deposited by cold spray10.1016/j.surfcoat.2011.12.010 ↗
20. Ion, A., Sallot, P., Badea, V., Duport, P., Popescu, C., and Denoirjean, A. (2021). The dual character of MAX phase nano-layered structure highlighted by supersonic particles deposition. Coatings, 11.10.3390/coatings11091038 ↗
21. Influence of MAX-phase deformability on coating formation by cold spraying10.1007/s11666-020-01110-w ↗
22. Cold spray deposition of Ti2AlC coatings for improved nuclear fuel cladding10.1016/j.jnucmat.2015.06.028 ↗
23. Amini, S., Strock, C.W., Sharon, J.A., Klecka, M.A., and Nardi, A.T. (2018). Cold Spray Manufacturing of MAXMET Composites. (10000851), U.S. Patent.
24. Zhao, Y., Zhou, L., Hua, Y., Liu, C., Tian, C., and Wu, L. (2012). Composite Material for Piston Ring Coating, Piston Ring Coating and Preparation Method Thereof. (102517577A), CN Patent.
25. Optimization of spray conditions in cold spraying based on the numerical analysis of particle velocity
26. Aerosol deposition of Ti3SiC2-MAX-phase coatings10.1007/s11666-021-01194-y ↗
27. Computational research on factors affecting particle velocity in a vacuum kinetic spray process10.1007/s11666-019-00941-6 ↗
28. Bai, C., Xie, X., Cui, Y., Li, T., Xiong, T., and Yang, R. (2016). Method for Preparing Ti2AlC Phase Ceramic Coating through Cold Spraying In-Situ Formation. (201610210730.3), CN Patent.
29. Cold-spray deposition of Ti2A1C coatings10.1016/j.vacuum.2013.01.023 ↗
30. Cold spraying of Ti2A1C max-phase coatings10.1007/s11666-012-9843-1 ↗
31. T. Influences of agglomeration powder preparation on deposition of cold-sprayed Ti2AlC coating
32. Effect of particle morphology and size distribution on cold-sprayed pure titanium coatings10.1007/s11666-013-9951-6 ↗
33. Effect of metal powder properties on the deposition characteristics of cold-sprayed Ti6Al4V-TiC coatings: An experimental and finite element study10.1016/j.surfin.2021.101208 ↗
34. Cold spraying of TiO2 photocatalyst coating with nitrogen process gas10.1007/s11666-010-9520-1 ↗
35. The influence of Al2O3 particle morphology on the coating formation and dry sliding wear behavior of cold sprayed Al-Al2O3 composites10.1016/j.surfcoat.2015.01.057 ↗
36. From particle acceleration to impact and bonding in cold spraying10.1007/s11666-009-9357-7 ↗
37. Multi-scale tribological and nanomechanical behavior of cold sprayed Ti2AlC MAX phase coating10.1016/j.surfcoat.2017.11.067 ↗
38. MAX phase coatings for accident tolerant nuclear fuel
39. Cold spray deposition of Cr2AlC MAX phase for coatings and bondcoat layers10.1016/j.jeurceramsoc.2018.11.035 ↗
40. Radiation response of Ti2AlC MAX phase coated Zircaloy-4 for accident tolerant fuel cladding10.1016/j.jnucmat.2019.05.021 ↗
41. Interfacial studies between cold-sprayed WO3, Y2O3 films and Si substrate10.1016/j.apsusc.2003.11.073 ↗
42. Cold-Sprayed TiO2 coatings from nanostructured ceramic agglomerated powders10.1080/10426914.2015.1090587 ↗
43. Characterization of microstructure of nano-TiO2 coating deposited by vacuum cold spraying10.1361/105996306X146901 ↗
44. (2021). Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings. Standard No. ASTM C633-13.
45. Investigation of Al-Al2O3 cold spray coating formation and properties10.1007/s11666-007-9086-8 ↗
46. The cold spray process and its potential for industrial applications10.1361/105996306X108110 ↗
47. Study of Ti deposition onto Al alloy by cold gas spraying10.1016/j.surfcoat.2010.03.061 ↗
48. Synthesis and some properties of Ti3SiC2 by hot pressing of Ti, Si and C powders. part II: Mechanical and other properties of Ti3SiC210.1179/174328405X58841 ↗
49. Vickers contact damage of micro-layered Ti3SiC210.1016/S0955-2219(97)00201-X ↗
50. Ti3SiC2: A damage tolerant ceramic studied with nanoindentations and transmission electron microscopy10.1016/S1359-6454(03)00091-0 ↗
51. Synthesis and characterization of Ti3AlC210.1111/j.1151-2916.2000.tb01281.x ↗
52. Surface modification of a Ti2AlC soft ceramic by plasma nitriding treatment10.1016/j.surfcoat.2015.09.059 ↗
53. Processing and characterization of Ti2AlC, Ti2AlN, and Ti2AlC0.5N0.510.1007/s11661-006-0243-3 ↗
54. Nano scratch and nanoindentation: An approach to understand the tribological behavior of MAX phase material Ti2AlC10.1088/1757-899X/561/1/012111 ↗
55. Mechanical properties of low temperature synthesized dense and fine grained Cr2AlC ceramics10.1016/j.jeurceramsoc.2010.08.014 ↗
56. Synthesis and thermal and electrical properties of bulk Cr2AlC10.1016/j.scriptamat.2005.11.009 ↗
57. Mechanical properties of Cr2AlC ceramics10.1111/j.1551-2916.2007.01634.x ↗
58. An explanation of the indentation size effect in ceramics10.1080/09500838908206356 ↗
59. The corrosion behavior of cold sprayed zinc coatings on mild steel substrate10.1007/s11666-013-9893-z ↗
60. High velocity impact induced microstructure evolution during deposition of cold spray coatings: A review10.1016/j.surfcoat.2014.06.006 ↗
61. An experimental and finite element study of cold spray copper impact onto two aluminum substrates10.1007/s11666-009-9454-7 ↗
62. Study on impact fusion at particle interfaces and its effect on coating microstructure in cold spraying10.1016/j.apsusc.2007.06.026 ↗
63. Cold gas dynamic spraying of aluminium: The role of substrate characteristics in deposit formation10.1361/10599630522666 ↗