Synthesis and Properties of a Photocurable Coating Based on Waste Cooking Oil
Source abstract
Abstract
In order to provide a cost-effective solution for photocurable coatings and introduce a novel approach for utilizing waste cooking oil (WCO), a type of photocurable resin based on WCO was synthesized. This WCO-based coating incorporated epoxy waste oil methacrylate (EWOMA) derived from WCO and 2-hydroxyethyl methacrylate (HEMA) as a second monomer. It allowed for easy application and rapid curing when exposed to 405 nm purple light. The cured coating, with an optimized composition of EWOMA: HEMA = 4:1 in mass ratio, exhibited favorable mechanical properties (tensile strength: 9.3 MPa, elongation at break: 38.1%) and demonstrated good coating film performance. The coating film exhibited good adhesion (grade 2), high pencil hardness (2H), excellent impact strength (62 kg·cm−1) and low aldehyde content (0.34 μg·g−1). Moreover, it showcased excellent antismudge properties, with a low percentage of water-based ink residual (6.8%), which could be effortlessly and completely removed by wiping. Additionally, the WCO-based coating demonstrated impressive anticorrosive properties, as evidenced by the intact coating film on the tinplate that remained corrosion-free for over 20 days in brine. This cost-effective WCO-based coating offers a viable alternative to commercial photocurable coatings.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Polymer composites and self-healing · Photopolymerization techniques and applications · Silicone and Siloxane Chemistry
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
College of Materials Science and Engineering, Guilin University of Technology, Guilin 541004, China
Funding
National Nature Science Foundation of China · Guangxi Natural Science Foundation Program
References (100+)
Show source-provided references
1. Environmental assessment of four waste cooking oil valorization pathways10.1016/j.wasman.2021.11.037 ↗
2. Manikandan, G., Kanna, P.R., Taler, D., and Sobota, T. (2023). Review of Waste Cooking Oil (WCO) as a Feedstock for Biofuel-Indian Perspective. Energies, 16.10.3390/en16041739 ↗
3. Managing the hazardous waste cooking oil by conversion into bioenergy through the application of waste-derived green catalysts: A review10.1016/j.jhazmat.2021.127636 ↗
4. Waste Cooking OilsAn Economical Source for Biodiesel: A Review10.1021/ie0510526 ↗
5. The conundrum of waste cooking oil: Transforming hazard into energy10.1016/j.jhazmat.2021.126129 ↗
6. Optimum biodiesel production from waste vegetable oil using functionalized cow horn catalyst: A comparative evaluation of some expert systems10.1016/j.clet.2021.100184 ↗
7. Optimum biodiesel production from waste vegetable oil using functionalized cow horn catalyst: A comparative evaluation of some expert systems10.1007/s11356-019-06424-z ↗
8. Synthesis and oxidative stability of trimethylolpropane fatty acid triester as a biolubricant base oil from waste cooking oil
9. Litsea cubeba kernel oil as a promising new medium-chain saturated fatty acid feedstock for biolubricant base oil synthesis10.1016/j.indcrop.2021.113564 ↗
10. Experimental investigation and process simulation of biolubricant production from waste cooking oil10.1016/j.biombioe.2020.105850 ↗
11. Oil recovery from drilling cuttings by biosurfactant from kitchen waste oil10.1080/15567036.2019.1624884 ↗
12. Preparation and characterization of water reducible alkyd resin/colloidal silica nanocomposite coatings10.1016/j.porgcoat.2014.01.017 ↗
13. Highly branched high solids alkyd resins10.1016/S0300-9440(01)00249-1 ↗
14. Correlative studies on the properties of rubber seed and soybean oil-based alkyd resins and their blends10.1007/s11998-020-00416-2 ↗
15. Indoor use of essential oil-based cleaning products: Emission rate and indoor air quality impact assessment based on a realistic application methodology10.1016/j.atmosenv.2020.118060 ↗
16. Taguchi Optimization for Waste Cooking Oil Based Biodiesel Preparation10.35940/ijeat.A9531.029320 ↗
17. Synthesis of Biodiesel from Waste Cooking Oil by One-step Esterification and Its Structural Characterization10.1007/s12649-018-0500-x ↗
18. Study of the transesterification of waste cooking oil for the production of biodiesel in a microreactor pilot: The effect of acetone as the co-solvent10.1016/j.fuel.2020.117736 ↗
19. Emergy-based assessment of biodiesel production in India using edible and non-edible oil10.1007/s13762-021-03750-z ↗
20. Development of two-step noncatalytic esterification of waste cooking oil for biodiesel preparation
21. Biodiesel production from non-edible plant oils10.1177/0144598716630166 ↗
22. Four-Dimensional Printing of Multifunctional Photocurable Resin Based on Waste Cooking Oil10.1021/acssuschemeng.2c05514 ↗
23. Synthesis and properties of wax based on waste cooking oil10.1039/D1RA08874B ↗
24. Fatty acid wax from epoxidation and hydrolysis treatments of waste cooking oil: Synthesis and properties10.1039/D2RA06390E ↗
25. Solid alcohol based on waste cooking oil: Synthesis, properties, micromorphology and simultaneous synthesis of biodiesel10.1016/j.wasman.2018.12.036 ↗
26. UV-curable self-healing, high hardness and transparent polyurethane acrylate coating based on dynamic bonds and modified nano-silica10.1016/j.porgcoat.2022.107051 ↗
27. Synthesis and characterization of ricinoleic acid based hyperbranched alkyds for coating application10.1016/j.porgcoat.2020.105832 ↗
28. Self-healing, high-performance, and high-biobased-content UV-curable coatings derived from rubber seed oil and itaconic acid10.1016/j.porgcoat.2021.106391 ↗
29. Development of palm oil-based alkyds as UV curable coatings10.1108/03699421211264866 ↗
30. Development of Green Waterborne UV-Curable Castor Oil-Based Urethane Acrylate Coatings: Preparation and Property Analysis10.1080/1023666X.2015.1050852 ↗
31. Yu, X.X., Hu, Y., Lei, W., Liu, C.G., and Zhou, Y.H. (2023). Development of Catalyst-Free Self-Healing Biobased UV-Curable Coatings via Maleate Monoester Transesterification. Coatings, 13.10.3390/coatings13010110 ↗
32. Features of planning an experiment to develop a new paint and varnish composition for the formation of protective and decorative coatings on wood products10.1088/1755-1315/949/1/012065 ↗
33. Synthesis of Photocurable Fluorenylidene Diacrylate for Optical Application10.1080/15421400802330762 ↗
34. Development of a photocurable glass-fiber reinforced epoxy-amine/thiol-ene composite10.1007/s10965-016-0917-5 ↗
35. Multi-material additive manufacturing of MWCNT-based conductive photocurable resin and its antimicrobial property10.1557/s43578-022-00853-2 ↗
36. Bio-Based Furanic Di(meth)acrylates as Reactive Diluents for UV Curable Coatings: Synthesis and Coating Evaluation10.1021/acssuschemeng.1c05588 ↗
37. Low-viscosity UV-curable polyurethane acrylates containing dendritic acrylates for coating metal sheets10.1007/s11998-018-0117-9 ↗
38. Polyacrylamide-based hydrogel coatings improve biocompatibility of implanted pump device10.1002/jbm.a.37521 ↗
39. Yeh, S.L., Deval, P., and Tsai, W.B. (2023). Fabrication of Transparent PEGylated Antifouling Coatings via One-Step Pyrogallol Deposition. Polymers, 15.10.3390/polym15122731 ↗
40. A strong, biodegradable and transparent cellulose-based bioplastic stemmed from waste paper10.1002/app.53671 ↗
41. Fluorescent cellulose-based materials for information encryption and anti-counterfeiting10.1016/j.ccr.2023.215287 ↗
42. Renewable lignin and its macromolecule derivatives: An emerging platform toward sustainable electrochemical energy storage10.1039/D3GC00565H ↗
43. Lignins as Promising Renewable Biopolymers and Bioactive Compounds for High-Performance Materials10.3390/polym15153177 ↗
44. Investigation of UV-curable alkyd coating properties
45. Plant oil-based branched polymer coatings enhanced with nucleobases for achieving strong adhesion and outstanding environmental tolerance10.1016/j.cej.2023.144602 ↗
46. Differing unsaturation levels of soybean oils impact the properties of peroxide-vulcanized carbon black-filled ethylene-propylene-diene monomer rubber10.1002/app.53872 ↗
47. Synthesis of woody oil-based plasticizer via solvent-free Diels-Alder reaction and its biodegradability10.1016/j.indcrop.2022.115646 ↗
48. Oktay, B., Türkcan, J.H., Özdemir, O.K., and Apohan, N.K. (2023). Vegetable oil-based epoxy coating materials for self-healing and anticorrosive applications. Macromol. Res., 14.10.1007/s13233-023-00190-1 ↗
49. Epoxy Coatings Based on Modified Vegetable Oils for Wood Surface Protection against Fungal Degradation10.1021/acsami.0c00682 ↗
50. Bio-Based Epoxy Resins of Epoxidized Soybean oil Cured with Salicylic acid Loaded with Chitosan: Evaluation of Physical-Chemical Properties10.1007/s10924-022-02585-0 ↗
51. Vegetable Oil-Based Resins Reinforced with Spruce Bark Powder and with Its Hydrochar Lignocellulosic Biomass10.3390/app112210649 ↗
52. Chemical and mechanical reprocessed resins and bio-composites based on five epoxidized vegetable oils thermosets reinforced with flax fibers or PLA woven10.1016/j.compscitech.2021.108678 ↗
53. Sustainable biobased composites from norbornylized linseed oil and biomass sorghum fillers10.1016/j.coco.2023.101695 ↗
54. 4D printing smart biomedical scaffolds with novel soybean oil epoxidized acrylate10.1038/srep27226 ↗
55. One-step acrylation of soybean oil (SO) for the preparation of SO-based macromonomers10.1039/c3gc36961g ↗
56. Effects of Catalyst Type and Reaction Parameters on One-Step Acrylation of Soybean Oil10.1021/sc400206t ↗
57. UV-Curable Cycloaliphatic Epoxide Based on Modified Linseed Oil: Synthesis, Characterization and Kinetics10.1002/macp.200400390 ↗
58. Synthesis and evaluation of novel plant oil-based polymers as binders for artist paints: Controllable drying behavior and low yellowness10.1016/j.porgcoat.2021.106607 ↗
59. Biobased poly(vinyl ether)s derived from soybean oil, linseed oil, and camelina oil: Synthesis, characterization, and properties of crosslinked networks and surface coatings10.1016/j.porgcoat.2018.09.033 ↗
60. Enabling Green Manufacture of Polymer Products via Vegetable Oil Epoxides10.1021/acs.iecr.2c03867 ↗
61. Influence of Keratin on Epoxidized Linseed Oil Curing and Thermoset Performances10.1021/acssuschemeng.1c06112 ↗
62. Recyclable, Repairable, and Reshapable (3R) Thermoset Materials with Shape Memory Properties from Bio-Based Epoxidized Vegetable Oils10.1021/acsabm.0c01199 ↗
63. Sustainable Series of New Epoxidized Vegetable Oil-Based Thermosets with Chemical Recycling Properties10.1021/acs.biomac.0c01059 ↗
64. Acid-Cured Norbornylized Seed Oil Epoxides for Sustainable, Recyclable, and Reprocessable Thermosets and Composite Application10.1021/acsapm.2c02225 ↗
65. Soy-based UV-curable thiol-ene coatings10.1007/s11998-010-9241-x ↗
66. H-bonds and metal-ligand coordination-enabled manufacture of palm oil-based thermoplastic elastomers by photocuring 3D printing
67. Soybean oil-based UV-curable coatings strengthened by crosslink agent derived from itaconic acid together with 2-hydroxyethyl methacrylate phosphate10.1016/j.porgcoat.2016.04.014 ↗
68. Highly transparent acrylate epoxidized soybean oil based UV-curable silicone-modified coatings with good thermal stability and flame retardancy10.1016/j.porgcoat.2022.106769 ↗
69. Flame retardant UV-curable acrylated epoxidized soybean oil based organic-inorganic hybrid coating10.1016/j.porgcoat.2012.10.007 ↗
70. Development of acrylated soybean oil-based UV-curable coatings with high impact strength from low viscosity oligomer10.1002/app.45698 ↗
71. Developing acrylated epoxidized soybean oil coating for improving moisture sensitivity and permeability of starch-based film10.1016/j.ijbiomac.2018.11.239 ↗
72. Direct Conversion of McDonald’s Waste Cooking Oil into a Biodegradable High-Resolution 3D-Printing Resin10.1021/acssuschemeng.9b06281 ↗
73. (1992). General Preparation of Paint Film (Standard No. China Standard GB/T 1727-1992).
74. (2008). Animal and Vegetable Fats and Oils—Determination of Iodine Value (Standard No. China Standard GB/T 5532-2008).
75. (2008). Determinating the Epoxy Value of Plasticizers (Standard No. China Standard GB/T 1677-2008).
76. (2016). National Standards for Food Safety—Determination of Fatty Acids in Food (Standard No. China Standard GB 5009.168-2016).
77. (2008). Ethylene Glycol for Industrial Use—Determination of Content of Total Aldehydes Present—Spectrophotometric Method (Standard No. China Standard GB/T 14571.3-2008).
78. (2006). Plastics—Determination of Tensile Properties—Part 2: Test Conditions for Moulding and Extrusion Plastics (Standard No. China Standard GB/T 1040.2-2006).
79. (2006). Paints and Varnishes—Determination of Film Hardness by Pencil Test (Standard No. China Standard GB/T 6739-2006).
80. (1998). Paints and Varnishes—Cross Cut Test for Films (Standard No. China Standard GB/T 9286-1998).
81. (2020). Determination of Impact Resistance of Film (Standard No. China Standard GB/T 1732-2020).
82. (1985). Paints and Varnishes—Determination of Resistance to Water—Water Immersion Method (Standard No. China Standard GB/T 5209-1985).
83. (1979). Methods of Test for Chemical Resistance of Paint Films (Standard No. China Standard GB/T 1763-1979).
84. (2007). Paints and Varnishes—Determination of Specular Gloss of Non-Metallic Paint Films at 20, 60 and 85 (Standard No. China Standard GB/T 9754-2007).
85. (2009). Test Method for Yellowing Resistance of Wood Coatings (Standard No. China Standard GB/T 23983-2009).
86. Bio-Based Waterborne Polyurethane Coatings with High Transparency, Antismudge and Anticorrosive Properties10.1021/acsami.2c21525 ↗
87. Castor oil-based transparent and omniphobic polyurethane coatings with high hardness, anti-smudge and anti-corrosive properties10.1016/j.porgcoat.2022.107120 ↗
88. Fluorine-Free Anti-Smudge Polyurethane Coatings10.1002/anie.201504892 ↗
89. Anti-smudge and self-cleaning characteristics of waterborne polyurethane coating and its construction10.1016/j.jcis.2022.08.017 ↗
90. Synthesis and characterization of novel renewable castor oil-based UV-curable polyfunctional polyurethane acrylate10.1007/s11998-017-9948-z ↗
91. Zhou, Y.M., Feng, L.X., and Qu, J.Q. (2023). Preparation of high-performance epoxy soybean oil-based UV-curable oligomers and coatings. J. Coat. Technol. Res., 1–11.10.1007/s11998-023-00787-2 ↗
92. Tang, J.J., Zhang, J.S., Lu, J.Y., Huang, J., Zhang, F., Hu, Y., Liu, C.G., An, R.R., Miao, H.C., and Chen, Y.Y. (2020). Preparation and Properties of Plant-Oil-Based Epoxy Acrylate-Like Resins for UV-Curable Coatings. Polymers, 16.10.3390/polym12092165 ↗
93. Castor oil-based polyfunctional acrylate monomers: Synthesis and utilization in UV-curable materials10.1016/j.porgcoat.2018.04.020 ↗
94. Cao, Z.Y., Gao, F., Zhao, J.Z., Wei, X., Cheng, Q., Zhong, J., Lin, C., Shu, J.B., Fu, C.Q., and Shen, L. (2019). Bio-Based Coating Materials Derived from Acetoacetylated Soybean Oil and Aromatic Dicarboxaldehydes. Polymers, 11.10.3390/polym11111809 ↗
95. New UV-Curable Anticorrosion Coatings from Vegetable Oils10.1002/mame.202100029 ↗
96. High-Performance Soybean-Oil-Based Epoxy Acrylate Resins: “Green” Synthesis and Application in UV-Curable Coatings10.1021/acssuschemeng.8b00388 ↗
97. Cationic UV-cured coatings of epoxide-containing vegetable oils10.1016/S0257-8972(99)00244-3 ↗
98. High-performance castor oil-based polyurethane thermosets: Facile synthesis and properties10.1016/j.reactfunctpolym.2022.105496 ↗
99. Protective effects of Clostridium butyricum against oxidative stress induced by food processing and lipid-derived aldehydes in Caco-2 cells10.1007/s00253-020-10896-2 ↗
100. Effect of glycation derived from α-dicarbonyl compounds on the in vitro digestibility of β-casein and β-lactoglobulin: A model study with glyoxal, methylglyoxal and butanedione10.1016/j.foodres.2017.10.002 ↗