Investigation of the Wet and Thermal Conditions Effect on the Micro-Scale Characteristics of Interfacial Transition Zone of Porous Asphalt Mixture

Complex environmental factors can significantly influence the micro-properties of porous asphalt (PA) mixture. Therefore, the effects of short-term and long-term thermal aging and moisture immersion on the micromechanics properties, micro-morphology, and chemical element distributions of the interfacial transition zone (ITZ) of PA mixture were studied to reveal the mechanisms by which environmental degradation impact performance by means of nanoindentation (NI), backscattering scanning electron microscope (BSEM), and energy-dispersive X-ray spectroscopy (EDS) analysis techniques. The results show that the ITZ is not the softest part of the PA mixture, and the order of modulus is aggregate > ITZ > asphalt mastic. ITZ thickness is about 10–20 μm. Thermal aging has negligible effect on the width of ITZ. With increasing aging degree, the asphalt mastic and ITZ modulus increase, while water damage reduces the modulus of ITZ and slightly increases the width of ITZ. Thermal aging has little effect on the morphology of ITZ, while water damage will lead to microcracks and micropores in ITZ. Compared with thermal aging, water damage has a greater effect on the morphology of ITZ and leads to softening of the interfacial transition zone and asphalt mastic phase. The width of ITZ obtained by EDS line scanning is basically consistent with that of nanoindentation. Overall, external environmental factors have a more significant effect on the mechanical properties than the micro-morphology of ITZ. The outcomes of this research provide a better understanding of the impact of the service environment on the microscopic characteristics of PA mixture.