The Effects of CuO and SiO2 on Aluminum AA6061 Hybrid Nanocomposite as Reinforcements: A Concise Review
Source abstract
Abstract
Hybrid composites are obtained by embedding multiple micro and nano reinforcements into the matrix materials. These hybrid composites are helpful to obtain the useful properties of matrix and reinforcement materials. Aluminum matrix is one the most common matrix materials due to its excellent thermal and electrical properties. This review covers various aspects of nanoparticle-reinforced Al hybrid composites. Solid-state recycling of Al only consumes around 5% of the energy utilized in the conventional extraction and recycling methods. This review revolves around the induction of silica and copper oxide nanoparticles into the solid-state recycled Al matrix material to form the hybrid composite. These nanoparticles enhance stiffness, toughness, and high temperature stability for Al hybrid composites. A detailed analysis was carried out for AA6061-grade Al matrix materials along with the silica and copper oxide nanoparticles. The present work focused on the effects of nano silica and nano copper oxide particle reinforcements on Al-based composite manufactured via hot extrusion process. The composite fabrication through solid-state recycling is discussed in detail. A detailed analysis for the effects of volume fraction and wt.% of CuO and SiO2 reinforcement particles was carried out by various characterization techniques. A detailed comparison in terms of mechanical performance of Al-based composites with the addition of nano silica and nano copper oxide particles is presented here to investigate the efficiency and performance of these particles.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · MXene and MAX Phase Materials · Bauxite Residue and Utilization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical and Manufacturing Engineering, Faculty of Engineering, Universiti Putra Malaysia, Serdang 43400, Selangor, Malaysia
Advanced Engineering Materials and Composites Research Centre, Faculty of Engineering, Universiti Putra Malaysia, Serdang 43400, Selangor, Malaysia
Sustainable Manufacturing and Recycling Technology, Advanced Manufacturing and Materials Centre (SMART-AMMC), Universiti Tun Hussein Onn Malaysia, Batu Pahat 86400, Johor, Malaysia
Engineering Technical College (ETCN), Al-Furat Al-Awsat Technical University (ATU), Kut 52001, Iraq
Funding
Universiti Putra Malaysia
References (100+)
Show source-provided references
1. Clyne, T.W., and Hull, D. (2019). An Introduction to Composite Materials, Cambridge University Press.10.1017/9781139050586 ↗
2. Latest research development in aluminum matrix with particulate reinforcement composites—A review10.1016/j.matpr.2017.11.260 ↗
3. Kumar, D., Idapalapati, S., Wang, W., and Narasimalu, S. (2019). Effect of surface mechanical treatments on the microstructure-property-performance of engineering alloys. Materials, 12.10.3390/ma12162503 ↗
4. An investigation of the mechanical properties of hybridcomposites in applications of automotive industry10.1016/j.matpr.2019.05.172 ↗
5. Comparison of mechanical properties of AA6061 reinforced with (SiC/B4C) micro/nano ceramic particle reinforcements10.1016/j.matpr.2018.06.146 ↗
6. Advanced production routes for metal matrix composites10.1002/eng2.12330 ↗
7. Kainer, K.U. (2006). Basics of metal matrix composites. Met. Matrix Compos., 1–54.10.1002/3527608117.ch1 ↗
8. Enhancement of mechanical properties of alumi-num 6061 metal matrix composite
9. Applicability of metallic reinforcements for mechanical performance enhancement in metal matrix composites: A review
10. Microstructural evolution, powder characteristics, compaction behavior and sinterability of al 6061–B4C composites as a function of reinforcement content and milling times10.3103/S1067821218020098 ↗
11. Wear and mechanical properties of Al6061/SiC/B4C hybrid composites produced with powder metallurgy10.1016/j.jmrt.2019.09.002 ↗
12. Effect of reinforcement surface area on tribological behaviour of aluminium alloy nanocomposites10.1016/j.promfg.2019.02.033 ↗
13. Tjprc impact of extrusion procession wear behavior of boron nitride reinforced aluminum 6061-based composites
14. Dry sliding wear characteristics of aluminium metal matrix composites: A brief overview10.1016/j.jmrt.2019.04.017 ↗
15. Fatigue crack growth behavior in powder-metallurgy 6061 aluminum alloy reinforced with submicron Al2O3 particulates10.1016/j.compositesb.2012.05.031 ↗
16. Hot deformation response of Al 6061-MWCNTs alloy composites10.35940/ijitee.L2484.1081219 ↗
17. Microstructure evolution and mechanical properties of micro-/nano-bimodal size B4C particles reinforced aluminum matrix composites prepared by SPS followed by HER10.1016/j.vacuum.2018.01.052 ↗
18. A comprehensive predicting model for thermomechanical properties of particulate metal matrix nanocomposites10.1016/j.jallcom.2017.12.232 ↗
19. Study on mechanical and ballistic performances of boron carbide reinforced Al 6061 aluminum alloy produced by powder metallurgy10.1016/j.compositesb.2018.04.043 ↗
20. Influence of B4C particle reinforcement on mechanical and machining properties of Al6061/B4C composites10.1016/j.compositesb.2016.07.006 ↗
21. Eco-friendly technology for recycling of cutting fluids and metal chips: A review10.1007/s40684-017-0051-9 ↗
22. Malaki, M., Xu, W., Kasar, A.K., Menezes, P.L., Dieringa, H., Varma, R.S., and Gupta, M. (2019). Advanced metal matrix nanocomposites. Metals, 9.10.3390/met9030330 ↗
23. Advance research progresses in aluminium matrix composites: Manufacturing & applications10.1016/j.jmrt.2019.06.028 ↗
24. Aluminium–ferro-chromium composites produced by recycling of chips10.1016/S0924-0136(01)00966-9 ↗
25. Development of an aluminum/amorphous nano-SiO2 composite using powder metallurgy and hot extrusion processes10.1016/j.ceramint.2017.06.057 ↗
26. Effect of copper content on microstructure and mechanical properties of Al/Sip composites consolidated by liquid phase hot pressing10.1016/j.matdes.2016.07.085 ↗
27. Friction assisted solid state lap seam welding and additive manufacturing method10.1016/j.dt.2015.11.001 ↗
28. Aluminium alloy composites and its machinability studies: A review10.1016/j.matpr.2018.02.351 ↗
29. Kaufman, J.G. (2016). Properties and Characteristics of Aluminum and Aluminum Alloys, ASM Int.
30. A review on tribological, mechanical, corrosion and wear characteristics of stir cast AA6061 composites10.1016/j.matpr.2020.03.392 ↗
31. Richter-Trummer, V. (2008). Characterization of Different Aluminum Alloys of the Series 6000 and of Their Joining Processes. [Master’s Thesis, Universidade do Porto].
32. TotalBoox and TBX (2010). Fundamentals of Aluminum Metallurgy, Elsevier Science.
33. Microstructural and physical characteristics of recycling aluminium chips AA6061/Al powder using powder metallurgy10.21817/ijet/2016/v8i6/160806218 ↗
34. Capuzzi, S., and Timelli, G. (2018). Preparation and melting of scrap in aluminum recycling: A review. Metals, 8.10.3390/met8040249 ↗
35. Abrasive wear behaviour of TiB2 fabricated aluminum 606110.1016/j.matpr.2017.11.082 ↗
36. Environmental assessment of solid state recycling routes for aluminum alloys: Can solid state processes significantly reduce the environmental impact of aluminum recycling?10.1016/j.cirp.2015.04.051 ↗
37. Solid-state recycling of light metals: A review10.1177/1687814016661921 ↗
38. Evolutionary in solid state recycling techniques of aluminium: A review10.1016/j.procir.2016.01.117 ↗
39. A novel recycling and reuse method of iron scraps from machining process10.1016/j.jclepro.2020.121732 ↗
40. Effect of equal channel angular pressing on the surface roughness of solid state recycled aluminum alloy 6061 chips
41. Social networks and status attainment10.1146/annurev.soc.25.1.467 ↗
42. Review of solid state recycling of aluminum chips10.1016/j.resconrec.2017.06.004 ↗
43. Enhanced microstructural homogeneity in metal-matrix composites developed under high-pressure-double-torsion10.1016/j.matchar.2015.04.012 ↗
44. Optimization of tungsten inert gas welding parameters to10.1016/j.matpr.2018.10.312 ↗
45. Developments in the aluminum metal matrix composites reinforced by micro/nano particles—A review10.1177/0021998319865307 ↗
46. SiC and Al2O3 reinforced aluminum metal matrix composites for heavy vehicle clutch applications10.1007/s12666-015-0542-8 ↗
47. Aluminium composites fabrication technique and effect of improvement in their mechanical properties—A review10.1016/j.matpr.2018.10.171 ↗
48. A comparative study of the mechanical and tribological behaviours of different aluminium matrix–ceramic composites10.1007/s40430-019-1831-7 ↗
49. Nanoscaled inorganic materials by molecular design10.1039/c2cs90050e ↗
50. Extraordinary reinforcing effect of carbon nanotubes in aluminium matrix composites assisted by in-situ alumina nanoparticles10.1016/j.compositesb.2019.107691 ↗
51. In situ synthesis of Al2O3 particulate-reinforced Al matrix composite by low temperature sintering10.1007/s10853-005-5476-9 ↗
52. Reaction mechanism and mechanical properties of an aluminum-based composite fabricated in-situ from Al–SiO2 system10.1016/j.matchemphys.2014.02.020 ↗
53. Silica sand modified aluminium composite: An empirical study of the physical, mechanical and morphological properties10.1088/2053-1591/ab14c6 ↗
54. Tribological and mechanical properties of AA6061 reinforced with SiC and graphite for automobile applications10.1016/j.matpr.2019.05.354 ↗
55. Microstructure and performance of electroformed Cu/nano-SiC composite10.1016/j.matdes.2006.04.021 ↗
56. Synthesis and characterization of Cu–ZrO2 nanocomposite produced by thermochemical process10.1016/j.jallcom.2017.05.209 ↗
57. Application of ARB process for manufacturing high-strength, finely dispersed and highly uniform Cu/Al2O3 composite10.1016/j.msea.2010.08.038 ↗
58. Enhancing copper infiltration into alumina using spark plasma sintering to achieve high performance Al2O3/Cu composites10.1016/j.ceramint.2017.09.062 ↗
59. Microstructure and mechanical properties of alumina/copper composites fabricated by different infiltration techniques10.1016/S0167-577X(98)00012-3 ↗
60. Powder aluminum composites of Al–Cu system with micro-additions of oxide nanoparticles10.1134/S2075113316050026 ↗
61. Synergistic strengthening by load transfer mecha-nism and grain refinement of CNT/Al–Cu composites10.1016/j.carbon.2012.01.058 ↗
62. Tribological behavior of Al-Cu alloys and innovative Al-Cu metal matrix composite fabricated using stir-casting technique10.1016/j.matpr.2017.11.161 ↗
63. Tash, M.M., and Mahmoud, E. (2016). Development of in-Situ Al-Si/CuAl2 metal matrix composites: Microstructure, hardness, and wear behavior. Materials, 9.10.3390/ma9060442 ↗
64. Tensile properties of reactive stir-mixed and squeeze cast Al/CuOnp-based metal matrix nanocomposites10.1016/j.msea.2014.06.008 ↗
65. The effects of Cu addition and solutionising heat treatment on the microstructure and wear properties of hot-extruded Al–Mg2 Si eutectic alloy
66. Kim, K., Kim, D., Park, K., Cho, M., Cho, S., and Kwon, H. (2019). Effect of intermetallic compounds on the thermal and mechanical properties of Al–Cu composite materials fabricated by spark plasma sintering. Materials, 12.10.3390/ma12091546 ↗
67. A critical review on synthesis of aluminum metallic composites through stir casting: Challenges and opportunities10.1002/adem.202000322 ↗
68. Metal-matrix composites in ground transportation10.1007/s11837-006-0231-5 ↗
69. An analytical model for elastic modulus calculation of SiC whisker-reinforced hybrid metal matrix nanocomposite containing SiC nanoparticles10.1016/j.jallcom.2018.07.102 ↗
70. Discontinuously reinforced aluminum MMC extrusions10.1016/j.mprp.2016.01.074 ↗
71. Study on influence of die angle in cold extrusion on properties of nano sic reinforced 6061 aluminum alloy10.1016/j.matpr.2019.07.400 ↗
72. The effects of a reciprocating extrusion process on the friction and wear behaviors of AA 6061/SiC composites10.1557/jmr.2016.10 ↗
73. The manufacture and characterization of aluminum alloy metal matrix nano composites
74. Interfaces in metal matrix composites10.1016/0036-9748(84)90192-3 ↗
75. Additive manufacturing of metallic materials: A review10.1007/s11665-017-2747-y ↗
76. Metal matrix composites reinforced by nanoparticles—A review10.3390/met4010065 ↗
77. Mechanical properties of recycled aluminium chip reinforced with alumina (Al2O3) particle10.1002/mawe.201600778 ↗
78. Effects of reciprocating extrusion process on mechanical properties of AA 6061/SiC composites10.1016/S1003-6326(16)64123-7 ↗
79. Lajis, M.A., Yusuf, N.K., Noh, M.Z., and Ibrahim, M. (2013, January 23–25). Mechanical properties and surface integrity of direct recycling alumi-num chips (AA6061) by hot press forging process. Proceedings of the 11th Global Conference on Sustainable Manufacturing-Innovative Solutions, Berlin, Germany.
80. Effect of chip size on mechanical property and microstructure of AZ91D magnesium alloy prepared by solid state recycling10.1016/j.matchar.2007.02.002 ↗
81. Koopman, A.J. (2008). Analysis Tools for the Design of Aluminum Extrusion Dies. [Ph.D. Thesis, University of Twente].
82. Feasibility studies of a novel extrusion process for curved profiles: Experimentation and modelling10.1016/j.ijmachtools.2017.12.001 ↗
83. Manufacturing a curved profile with fine grains and high strength by differential velocity sideways extrusion10.1016/j.ijmachtools.2019.03.002 ↗
84. A review on direct hot extrusion technique in recycling of aluminium chips10.1007/s00170-019-04629-7 ↗
85. Dynamic evolution of grain structure and micro-texture along a welding path of aluminum alloy profiles extruded by porthole dies10.1016/j.msea.2016.11.089 ↗
86. Microstructure and mechanical properties of pure copper wire produced by shear assisted processing and extrusion10.1007/s11837-019-03752-w ↗
87. Krolo, J., Lela, B., and Ljumović, P. (2017, January 21–22). Electrical conductivity and mechanical properties of the solid state recycled EN AW 6082 alloy. Proceedings of the International Conference “Mechanical Technologies and Structural Materials 2017, Split, Croatia.
88. Effect of die design on the welding quality during solid state recycling of AA6060 chips by hot extrusion10.1016/j.msea.2013.03.010 ↗
89. Sabbar, H.M., Shamsudin, S., Abbas, M.A., Msebawi, M.S., Mustapa, M.S., Lajis, M.A., Rady, M.H., and Al Alim, S. (2019). Study on the wear influence for recycled AA6061 Aluminum/Al2O3 utilizing the face central-full factorial technique (FCFFT). Adv. Mater. Sci. Eng., 599–608.10.1007/978-981-13-8297-0_62 ↗
90. Effect of heat treatment on tensile strength of direct recycled aluminium alloy (AA6061)10.4028/www.scientific.net/MSF.961.80 ↗
91. High quality extrudates from aluminum chips by new billet compaction and deformation routes10.1016/j.cirp.2012.03.113 ↗
92. Hot profile extrusion of AA-6060 aluminum chips10.1016/j.jmatprotec.2008.07.047 ↗
93. Survival risk prediction of esophageal cancer based on self-organizing maps clustering and support vector machine ensembles10.1109/ACCESS.2020.3007785 ↗
94. Full factorial design for optimization, development and validation of HPLC method to determine valsartan in nanoparticles10.1016/j.jsps.2015.02.001 ↗
95. A novel approach for ANFIS modelling based on full factorial design10.1016/j.asoc.2007.03.010 ↗
96. Mechanical and metallurgical behavior of friction welded dual nano particles reinforced armour grade al based nanocomposite joints in optimized condition10.1016/j.matpr.2016.11.022 ↗
97. Optimization of coffee oil flavor encapsulation using response surface methodology10.1016/j.lwt.2016.02.025 ↗
98. Effect of nanoparticle reinforcement in metal matrix for structural applications10.1016/j.matpr.2017.06.222 ↗
99. Loyd, D.H. (2008). Physics Manual, Thomson Brooks/Cole. [3rd ed.].
100. Micromechanical properties and deformation behavior of Al3BC/6061 Al composites via micropillar compression10.1016/j.msea.2019.138852 ↗