Comparison of Friction Behaviour of Titanium Grade 2 after Non-Contact Boriding in Oxygen-Containing Medium with Gas Nitriding
Source abstract
Abstract
The surface characteristics and friction behaviour of titanium Grade 2 with modified nitride (TiN, Ti2N) and boride (TiB) compound layers were investigated. It was shown that during non-contact boriding in oxygen-containing medium of titanium, the diffusion processes take place mainly by the interscale mechanism; however, during nitriding, besides the traditional interscale diffusion mechanism, the grain boundary mechanism of diffusion of nitrogen atoms is also realized. The optimal set of surface roughness parameters (height and step parameters, a combination of kurtosis and asymmetry, and profile reference curve parameters) was obtained after boriding. It was determined that the intensity of the adhesive wear of the tribo-pairs with stainless steel and ultrahigh molecular weight polyethylene under dry sliding conditions was influenced not only by the hardness but also roughness of the modified surface layer. The lowest friction coefficient was fixed for the TiB compound layer in both tribo-pairs.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Advanced materials and composites · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Material Science Bases of Surface Engineering, Karpenko Physico-Mechanical Institute of the NAS of Ukraine, 79060 Lviv, Ukraine
Department of Mechanical, Energy and Biotechnology Engineering, Vytautas Magnus University, 44248 Kaunas, Lithuania
References (51)
Show source-provided references
1. Electrochemical response of TiO2 anodic layers fabricated on Ti6Al4V alloy with nanoporous, dual and nanotubular morphology10.1016/j.corsci.2016.07.021 ↗
2. Hierarchical micropore/nanorod apatite hybrids in-situ grown from 3-D printed macroporous Ti6Al4V implants with improved bioactivity and osseointegration10.1016/j.jmst.2016.05.013 ↗
3. In-situ nitriding on the textured titanium alloy using femtosecond laser10.1016/j.jmrt.2022.05.074 ↗
4. A comparative study of titanium nitride (TiN), titanium oxy nitride (TiON) and titanium aluminum nitride (TiAlN), as surface coatings for bio implants10.1016/j.surfcoat.2011.05.004 ↗
5. The improvement of wettability, biotribological behavior and corrosion resistance of titanium alloy pretreated by thermal oxidation10.1016/j.triboint.2014.06.008 ↗
6. Simultaneous reduction of wear and corrosion of titanium, magnesium and zirconium alloys by surface plasma electrolytic oxidation treatment10.4028/www.scientific.net/AMR.38.27 ↗
7. The role of hydrogen in the formation of oxide-ceramic layers on aluminum alloys during their plasma-electrolytic oxidation10.1016/j.jmrt.2021.07.082 ↗
8. Electrophoretic deposition, microstructure and selected properties of nanocrystalline SnO2/Sr enriched bioactive glass/chitosan composite coatings on titanium10.1016/j.surfcoat.2022.129004 ↗
9. Laser cladding of bioactive glass coating on pure titanium substrate with highly refined grain structure10.1016/j.jmbbm.2021.104519 ↗
10. Micro-arc oxidation preparation of a ZnO-Se composite coating on titanium with anti-oxidation and anti-bacterial potentials for osteomyelitis control10.1016/j.matlet.2022.132978 ↗
11. Surface hardening of biomedical Ti–29Nb–13Ta–4.6Zr and Ti–6Al–4V ELI by gas nitriding10.1016/j.msea.2007.08.065 ↗
12. Influence of regulated modification of nitride layer by oxygen on electrochemical behavior of Ti–6Al–4V alloy in Ringer’s solution10.1002/maco.201911018 ↗
13. Influence of oxynitriding on antifriction properties of Ti–6Al–4V titanium alloy10.3103/S1068366620040108 ↗
14. Increasing of functionality of c.p. titanium/UHMWPE tribo-pairs by thermodiffusion nitriding of titanium component10.1016/j.biotri.2016.08.002 ↗
15. Tribological, electrochemical and tribo-electrochemical characterization of bare and nitrided Ti6Al4V in simulated body fluid solution10.1016/j.corsci.2011.01.057 ↗
16. Biocompatibility study of nanocomposite titanium boron nitride (TiBN) thin films for orthopedic implant applications10.1016/j.surfcoat.2021.126968 ↗
17. Tribocorrosion and corrosion behavior of double borided layers formed on Ti-6Al-4V alloy: An approach for applications to bio-implants10.1016/j.corsci.2022.110824 ↗
18. Paleu, C.C., Munteanu, C., Istrate, B., Bhaumik, S., Vizureanu, P., Bal, M.S., and Paleu, V. (2020). Microstructural analysis and tribological behavior of amdry 1371 (mo–nicrfebsic) atmospheric plasma spray deposited thin coatings. Coatings, 10.10.3390/coatings10121186 ↗
19. Baltatu, M.S., Vizureanu, P., Sandu, A.V., Munteanu, C., and Istrate, B. (2020). Microstructural analysis and tribological behavior of Ti-based alloys with a ceramic layer using the thermal spray method. Coatings, 10.10.3390/coatings10121216 ↗
20. Sandblasted, acid etched and UV irradiated titanium surface for dental implants: In vitro and in vivo analysis10.1016/j.mtla.2021.101302 ↗
21. Histomorphometric and biomechanical evaluation of the osseointegration around micro- and nano-level boron-nitride coated titanium dental implants10.1016/j.jormas.2022.06.016 ↗
22. Tribocorrosion studies of metallic biomaterials: The effect of plasma nitriding and DLC surface modifications10.1016/j.jmbbm.2016.06.014 ↗
23. Corrosion and mechanical behavior of plasma nitrated metallic biomaterial surfaces
24. Enhancement of the biocompatibility by surface nitriding of a low-modulus titanium alloy for dental implant applications10.1002/jbm.b.34240 ↗
25. A review on surface engineering perspective of metallic implants for orthopaedic applications10.1007/s11837-021-04924-3 ↗
26. Surface properties and biocompatibility of nitrided titanium for abrasion resistant implant materials10.4012/dmj.21.355 ↗
27. Effect of thermodiffusion nitriding on cytocompatibility of Ti-6Al-4V titanium alloy10.1007/s11837-016-1824-2 ↗
28. Anisotropic elastic and thermal properties of titanium borides by first-principles calculations10.1016/j.jallcom.2013.06.119 ↗
29. Fretting corrosion response of boride coated titanium in Ringer’s solution for bio-implant use: Elucidation of degradation mechanism10.1016/j.triboint.2018.06.013 ↗
30. Hardness and elastic modulus of titanium nitride coatings prepared by pirac method10.1142/S0218625X18500403 ↗
31. Plasma surface modification of titanium by TiB precipitation for biomedical applications10.1016/j.surfcoat.2011.07.027 ↗
32. Viability of titanium-titanium boride composite as a biomaterial10.5402/2013/970535 ↗
33. Corrosion behavior of titanium boride composite coating fabricated on commercially pure titanium in Ringer’s solution for bioimplant applications10.1016/j.msec.2014.12.002 ↗
34. Response of boride coating on the Ti-6Al-4V alloy to corrosion and fretting corrosion behavior in Ringer’s solution for bio-implant application10.1016/j.apsusc.2017.09.223 ↗
35. Characteristics, wear and corrosion properties of borided pure titanium by pack boriding near α → β phase transition temperature10.1016/j.ceramint.2020.03.197 ↗
36. Spark plasma sintering assisted rapid growth of titanium boride layers on titanium: Microstructures and growth kinetics10.1016/j.surfcoat.2022.128083 ↗
37. TiB whisker coating on titanium surfaces by solid-state diffusion: Synthesis, microstructure, and mechanical properties10.1007/s11661-002-0336-6 ↗
38. Influence of thermochemical treatment on the surface topography of titanium10.15407/mfint.39.09.1183 ↗
39. Effect of impregnating atmosphere oxygen on boriding of titanium alloys10.1007/s11041-008-9054-z ↗
40. Structure and topography of the surfaces of titanium alloys after thermodiffusion saturation from boron carbide in vacuum10.1007/s11003-010-9296-y ↗
41. Pretreatment influence on titanium surface properties after gas nitriding10.1007/s11665-017-2934-x ↗
42. A new medium for boriding of Ti6Al4V alloy for biomedical applications
43. Tribological behaviour of Cl-implanted TiN coatings for biomedical applications10.1016/j.wear.2007.01.017 ↗
44. Friction and wear properties of UHMWPE against ion implanted titanium alloy10.1016/j.surfcoat.2006.09.043 ↗
45. Frictional coefficients of ion-implanted alumina against ion-implanted beta-titanium in the low load, low velocity, single pass regime10.1016/0109-5641(92)90076-O ↗
46. Influence of the surface nanocrystallization on the gas nitriding of Ti–6Al–4V alloy10.1016/j.apsusc.2013.09.105 ↗
47. Effect of SPD surface layer on plasma nitriding of Ti–6Al–4V alloy10.1016/j.msea.2013.09.077 ↗
48. Effect of pre-treatment with fine particle peening on surface properties and wear resistance of gas blow induction heating nitrided titanium alloy10.1016/j.surfcoat.2018.11.088 ↗
49. Analysis of the relationship between roughness parameters of wear surface and tribology performance of 5CB liquid crystal10.1016/j.molliq.2022.118711 ↗
50. Correlation between standard roughness parameters skewness and kurtosis and tribological behaviour of contact surfaces10.1016/j.triboint.2011.11.008 ↗
51. Influence of boriding temperature on microstructure and tribological properties of titanium10.1016/j.solidstatesciences.2020.106369 ↗