Oxygen Plasma Improved Shear Strength of Bonding between Zirconia and Composite Resin
Source abstract
Abstract
Improving the strength of the bonding of zirconia to composite resins remains a challenge in dental restorations. The purpose of this study was to evaluate the shear strength of the bonding of zirconia to composite resins, thereby verifying the hypothesis that as the power of the non-thermal oxygen plasma increases, the bonding strength of the plasma-treated zirconia is increased. The effects of the oxygen plasma power (100, 200, and 400 W) on the surface structure, chemical composition, and hydrophilicity of the zirconia and the strength of the bonding between zirconia and composite resin were investigated. As a result, after different plasma power treatments, the surface structure and phase composition of zirconia were not different from those of zirconia without treatment. However, the oxygen plasma treatment not only reduced carbon adsorption but also greatly increased the hydrophilicity of the zirconia surface. More importantly, the strength of the bonding between the plasma-treated zirconia and composite resin was significantly higher than that in the corresponding control group without plasma treatment. Regardless of whether the zirconia was pristine or sandblasted, the higher the plasma power, the greater the bond strength obtained. The conclusion is that the oxygen plasma treatment of zirconia can effectively improve the strength of the bonding between the zirconia and composite resin without damaging the microstructure and phase composition of the zirconia.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Dental materials and restorations · Dental Erosion and Treatment · Dental Implant Techniques and Outcomes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Institute of Oral Sciences, Chung Shan Medical University, Taichung 402, Taiwan
Department of Dentistry, Chung Shan Medical University Hospital, Taichung 402, Taiwan
Department of Dental Technology, Shu Zen Junior College of Medicine and Management, Kaohsiung 82144, Taiwan
Funding
Chung Shan Medical University
References (42)
Show source-provided references
1. Anusavice, K., Shen, C., and Ralph Rawls, H. (2013). Phillips’ Science of Dental Materials, Saunders. [12th ed.].
2. A study of discoloration of the gingiva by artificial crowns
3. Effect of preoxidation of titanium on the titanium–ceramic bonding10.1016/j.surfcoat.2007.05.056 ↗
4. Calcium silicate layer on titanium fabricated by electrospray deposition10.1016/j.msec.2019.01.011 ↗
5. Future perspectives of biomaterials for dental restoration10.1016/j.jeurceramsoc.2008.08.023 ↗
6. Impact behavior of three notched all-ceramic restorations after soaking in artificial saliva10.3390/ma8074479 ↗
7. Bonding between layering materials and zirconia frameworks10.1016/j.jdsr.2012.06.001 ↗
8. Thermal cycling procedures for laboratory testing of dental restorations10.1016/S0300-5712(98)00037-2 ↗
9. Flexural creep deformation and recovery in dental composites10.1016/S0300-5712(01)00049-5 ↗
10. Influence of priming agents on the short-term bond strength of an indirect composite veneering material to zirconium dioxide ceramic
11. Effect of surface treatment on bond strength between an indirect composite material and a zirconia framework10.2334/josnusd.54.39 ↗
12. Effect of various intraoral repair systems on the shear bond strength of composite resin to zirconia10.4047/jap.2013.5.3.248 ↗
13. Shear bond strengths of an indirect composite layering material to a tribochemically silica-coated zirconia framework material10.4012/dmj.2015-311 ↗
14. Shear bond strength of indirect composite material to monolithic zirconia10.4047/jap.2016.8.4.267 ↗
15. Adhesion between zirconia and indirect composite resin10.1016/j.ijadhadh.2016.03.011 ↗
16. Interfacial strengths of various alloy surface treatment for resin-bonded fixed partial dentures10.1016/0022-3913(90)90171-8 ↗
17. Relationship between sandblasting and composite resin-alloy bond strength by a silica coating10.1016/S0022-3913(05)80178-7 ↗
18. Durability of the resin bond strength to zirconia ceramic after using different surface conditioning methods10.1016/j.dental.2005.11.040 ↗
19. Influence of air-abrasion and subsequent heat treatment on bonding between zirconia framework material and indirect composites10.4012/dmj.2012-077 ↗
20. Effect of sandblasting on the long-term performance of dental ceramics10.1002/jbm.b.30097 ↗
21. Influence of surface and heat treatments on the flexural strength of Y-TZP dental ceramic10.1016/j.jdent.2004.07.001 ↗
22. Microstructural and crystallographic surface changes after grinding zirconia-based dental ceramics10.1002/jbm.b.30382 ↗
23. Damage and reliability of Y-TZP after cementation surface treatment10.1177/0022034510363253 ↗
24. Optimal sandblasting conditions for conventional-type yttria-stabilized tetragonal zirconia polycrystals10.1016/j.dental.2018.11.009 ↗
25. Aspects of silane coupling agents and surface conditioning in dentistry: An overview10.1016/j.dental.2012.02.009 ↗
26. Silica coating of zirconia by silicon nitride hydrolysis on adhesion promotion of resin to zirconia10.1016/j.msec.2014.10.029 ↗
27. Scaminaci Russo, D., Cinelli, F., Sarti, C., Giachetti, L., Scaminaci Russo, D., Cinelli, F., Sarti, C., and Giachetti, L. (2019). Adhesion to zirconia: A systematic review of current conditioning methods and bonding materials. Dent. J., 7.10.3390/dj7030074 ↗
28. Effect of different surface treatments on bond strength, surface and microscopic structure of zirconia ceramic10.1016/j.fdj.2016.04.005 ↗
29. Characterization of plasma fluorinated zirconia for dental applications by X-ray photoelectron spectroscopy10.1016/j.apsusc.2011.07.013 ↗
30. Surface characterization of Ti and Y-TZP following non-thermal plasma exposure10.1002/jbm.b.31887 ↗
31. Bond strength of composite luting cement to zirconia ceramic surfaces10.1016/j.dental.2005.02.005 ↗
32. Enhanced hydrophilicity and biocompatibility of dental zirconia ceramics by oxygen plasma treatment10.3390/ma8020684 ↗
33. Influence of atmospheric pressure low-temperature plasma treatment on the shear bond strength between zirconia and resin cement10.1016/j.jpor.2016.02.001 ↗
34. Non-thermal plasma enhanced bonding of resin cement to zirconia ceramic10.1016/j.cpme.2016.08.002 ↗
35. Park, C., Park, S.W., Yun, K.D., Ji, M.K., Kim, S., Yang, Y.P., and Lim, H.P. (2018). Effect of plasma treatment and its post process duration on shear bonding strength and antibacterial effect of dental zirconia. Materials, 11.10.3390/ma11112233 ↗
36. Effect of different times of nonthermal argon plasma treatment on the microtensile bond strength of self-adhesive resin cement to yttria-stabilized tetragonal zirconia polycrystal ceramic10.1016/j.prosdent.2018.03.025 ↗
37. Kim, D.S., Ahn, J.J., Bae, E.B., Kim, G.C., Jeong, C.M., Huh, J.B., and Lee, S.H. (2019). Influence of non-thermal atmospheric pressure plasma treatment on shear bond strength between Y-TZP and self-adhesive resin cement. Materials, 12.10.3390/ma12203321 ↗
38. ISO/TS 11405 (2015). Dental Materials—Testing of Adhesion to Tooth Structure, International Organization for Standardization.
39. Evaluation of the surface roughness and morphologic features of Y-TZP ceramics after different surface treatments10.1089/pho.2008.2293 ↗
40. Improved physicochemical properties and biocompatibility of stainless steel implants by PVA/ZrO2-based composite coatings10.1016/j.surfcoat.2014.08.066 ↗
41. High surface energy enhances cell response to titanium substrate microstructure10.1002/jbm.a.30320 ↗
42. Surface characterisation and bonding of Y-TZP following non-thermal plasma treatment10.1016/j.jdent.2012.10.002 ↗