The Influence of NIR Pigments on Coil Coatings’ Thermal Behaviors
Source abstract
Abstract
The effect of over-heating in urban areas, called the urban heat island effect (UHI effect), is responsible for greater energy consumption for cooling buildings. Several reflective near-infrared (NIR) coatings, called cool coatings have proved to be effective for contrasting the UHI effect. The thermal and appearance properties of cool coatings depend on the color and they often have been studied only at the initial state, without undergoing atmospheric degradation and soiling. In this work, the thermal, visual and durability behaviors of red and brown polyester-based organic coatings for roof applications were studied. All samples were subjected to accelerated degradation cycles composed of UV-B and salt spray chamber exposure. The sample degradation was assessed by infrared spectroscopy, gloss and colorimetric analyses. Moreover, the thermal behavior was studied by means of a simplified experimental setup. Finally, a soiling and weathering test was conducted to simulate the soiling of three years’ external exposure. Despite the phenomena of chemical degradation and a decrease in aesthetic properties, the samples maintain their thermal performance, which is not even influenced by dirt products. In addition, NIR pigments significantly improve the thermal behavior of brown coatings.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Urban Heat Island Mitigation · Pigment Synthesis and Properties · Skin Protection and Aging
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Industrial Engineering, University of Trento, Via Sommarive 9, 38123 Trento, Italy
References (67)
Show source-provided references
1. European Commision (2020, February 15). Energy Efficiency in Buildings. Available online: https://ec.europa.eu/energy/en/topics/energy-efficiency/energy-performance-of-buildings.
2. Life cycle and life cycle cost implications of integrated phase change materials in office buildings10.1002/er.4238 ↗
3. Mavrakou, T., Polydoros, A., Cartalis, C., and Santamouris, M. (2018). Recognition of Thermal Hot and Cold Spots in Urban Areas in Support of Mitigation Plans to Counteract Overheating: Application for Athens. Climate, 6.10.3390/cli6010016 ↗
4. EPA (2020, January 08). Heat Island Effect, Available online: https://www.epa.gov/heat-islands.
5. Santamouris, M. (2001). Energy and Climate in the Urban Built Environment, Routledge.10.1016/B978-008043865-8/50014-3 ↗
6. Utilizing green and blue space to mitigate urban heat island intensity10.1016/j.scitotenv.2017.01.158 ↗
7. Thermal behavior of a vertical green facade and its impact on the indoor and outdoor thermal environment10.1016/j.enbuild.2019.109502 ↗
8. Reducing urban heat island effects: A systematic review to achieve energy consumption balance
9. On the development, optical properties and thermal performance of cool colored coatings for the urban environment10.1016/j.solener.2006.08.005 ↗
10. Estimating the ecological footprint of the heat island effect over Athens, Greece10.1007/s10584-006-9128-0 ↗
11. On the impact of urban heat island and global warming on the power demand and electricity consumption of buildings—A review10.1016/j.enbuild.2014.09.052 ↗
12. Soiling of building envelope surfaces and its effect on solar reflectance—Part II: Development of an accelerated ageing method for roofing materials10.1016/j.solmat.2013.11.028 ↗
13. Green and cool roofs’ urban heat island mitigation potential in tropical climate10.1016/j.solener.2018.08.006 ↗
14. Using advanced thermochromic technologies in the built environment: Recent development and potential to decrease the energy consumption and fight urban overheating10.1016/j.solmat.2018.10.023 ↗
15. Occupancy-based zone-level VAV system control implications on thermal comfort, ventilation, indoor air quality and building energy efficiency10.1016/j.enbuild.2019.109473 ↗
16. Cool roofs and cool pavements application in Acharnes, Greece10.1016/j.scs.2017.11.035 ↗
17. Solar spectral optical properties of rutile TiO2 coated mica-titania pigments10.1016/j.dyepig.2014.04.028 ↗
18. The influence of Mn/N-codoping on the thermal performance of ZnAl2O4 as high near-infrared reflective inorganic pigment10.1016/j.jallcom.2016.12.100 ↗
19. Color variation of electrophoretic styrene-acrylic paints under field and accelerated ultraviolet exposure10.1016/j.matdes.2016.12.051 ↗
20. Single novel Ca0.5Mg10.5(HPO3)8(OH)3F3 coating for efficient passive cooling in the natural environment10.1016/j.solener.2020.03.103 ↗
21. Long-term monitoring for comparison of seasonal effects on cool roofs in humid subtropical climates10.1016/j.enbuild.2019.109572 ↗
22. Nanostructured zinc aluminates: A promising material for cool roof coating10.1016/j.jsamd.2019.10.003 ↗
23. Energy Performance of Cool Roofs Followed by Development of Practical Design Tool10.3389/fenrg.2019.00122 ↗
24. Effects of natural soiling and weathering on cool roof energy savings for dormitory buildings in Chinese cities with hot summers10.1016/j.solmat.2019.110016 ↗
25. Potential energy and climate benefits of super-cool materials as a rooftop strategy10.1016/j.uclim.2019.100495 ↗
26. Synthesis of solar heat-reflective ZnTiO3 pigments with novel roof cooling effect10.1016/j.ceramint.2019.05.081 ↗
27. Sodium titanate as an infrared reflective material for cool roof application10.36410/jcpr.2019.20..86 ↗
28. Adaptive thermochromic roof system: Assessment of performance under different climates10.1016/j.enbuild.2019.02.040 ↗
29. Estimates of cooling effect and energy savings for a cool white coating used on the roof of scale model buildings10.1088/1757-899X/479/1/012024 ↗
30. Experimental analysis on the active and passive cool roof systems for industrial buildings in Malaysia10.1016/j.jobe.2018.05.001 ↗
31. Effect of high aged albedo cool roofs on commercial buildings energy savings in U.S.A. climates
32. Estimating thermal performance of cool colored paints10.1016/j.enbuild.2009.07.026 ↗
33. A quick assessment of the photocatalytic activity of TiO2 pigments—From lab to conservation studio10.1016/j.microc.2015.11.048 ↗
34. Bottom-like benefits of prepainted metal
35. The coupled galvanizing and painting line at Marcegaglia Plant
36. Bianco, M. (2009, January 4–7). New Galvanizing Line Coupled with High-Speed Painting Line at Marcegaglia’s Ravenna Plant, Italy. Proceedings of the Iron and Steel Technology Conference (AISTech 2009), St. Louis, MO, USA.
37. (2020, April 29). Ecca—Prepainted Metal Site. Available online: https://www.prepaintedmetal.eu/home.
38. The European coil coatings market
39. Going Green: Making reality match ambition for sustainable coil coatings10.1007/s11998-015-9766-0 ↗
40. Coil-coating branch focussing versatility
41. Innovative surface design with coil coatings
42. Performance of polyester and modified polyester coil coatings exposed in different environments with high UV radiation10.1016/j.porgcoat.2007.01.006 ↗
43. Comparison of organic coating accelerated tests and natural weathering considering meteorological data10.1016/j.porgcoat.2006.09.036 ↗
44. Effects of mechanical deformation on the protection properties of coil coating products10.1016/S0010-938X(99)00086-4 ↗
45. (2020, April 29). Condorcoat NB 100 Complex Oxide Convertion Coating. Available online: https://condoroil.com/docs_skt_imgs/SK_TECH_prod/St-%20Condorcoat%20NB%20100%20Rev.%2003.10%20Inglese.pdf.
46. (2020, April 29). Condorcoat EC 980: New Chrome Free Pretreatment for Galvanized Steel. Available online: https://www.expometals.net/en-gb/news-page-condoroil-group/condorcoat-ec-980-new-chrome-free-pretreatment-for-galvanized-steel-id12028.
47. Giannakopoulos, I. (2012). The Mechanical Properties of Polyester Based Coil Coatings. Correlations with Chemical Structure. [Ph.D. Thesis, Imperial College].
48. (2020, April 16). Overview of RAL Classic Colours. Available online: https://www.ral-farben.de/content/anwendung-hilfe/all-ral-colours-names/overview-ral-classic-colours.html.
49. (2020, April 16). RAL Colours. Available online: https://www.ralcolor.com/.
50. Infrared Reflecting Complex Inorganic Colored Pigments10.1002/9783527626915.ch24 ↗
51. Infrared Reflective Inorganic Pigments10.2174/2211334710801010067 ↗
52. (2006). Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials, ASTM International. ASTM G154-06.
53. (2018). Standard Practice for Operating Salt Spray (Fog) Apparatus, ASTM International. ASTM B117-18.
54. (2018). Standard Test Method for Specular Gloss, ASTM International. ASTM D523-14(2018).
55. Carter, E.C., Ohno, Y., Pointer, M.R., Robertson, A.R., Seve, R., Schanda, J.D., and Witt, K. (2004). Colorimetry, Commission Internationale de l’éclairage. [3rd ed.]. CIE 15: Technical Report.
56. (2013). Standard Practice for Surface Wettability of Coatings, Substrates and Pigments by Advancing Contact Angle Measurement, ASTM International. ASTM D7334-08.
57. (2018). Standard Practice for Laboratory Soiling and Weathering of Roofing Materials to Simulate Effects of Natural Exposure on Solar Reflectance and Thermal Emittance, ASTM International. ASTM D7897-18.
58. Quality Control
59. Testing accelerated weathering tests for appropriate weathering chemistry: Ozone filtered xenon arc10.1007/BF02697921 ↗
60. Effect of the polyester chemical structure on the stability of polyester–melamine coatings when exposed to accelerated weathering10.1016/j.porgcoat.2011.03.009 ↗
61. Accelerated weathering degradation behavior of polyester thermosetting powder coatings10.1016/j.porgcoat.2016.07.004 ↗
62. Role of steel and zinc coating thickness in cut edge corrosion of coil coated materials in atmospheric weathering conditions; Part 2: Field data and model10.1016/j.porgcoat.2016.06.019 ↗
63. Role of steel and zinc coating thickness in cut edge corrosion of coil coated materials in atmospheric weathering conditions; Part 1: Laboratory study10.1016/j.porgcoat.2016.06.013 ↗
64. SECM imaging of the cut edge corrosion of galvanized steel as a function of pH10.1016/j.electacta.2014.11.192 ↗
65. Investigation of the cut-edge corrosion of organically-coated galvanized steel after accelerated atmospheric corrosion test10.1016/j.arabjc.2013.04.023 ↗
66. Coil-coated Zn-Mg and Zn-Al-Mg: Effect of climatic parameters on the corrosion at cut edges10.1016/j.porgcoat.2015.01.023 ↗
67. Cut edge corrosion protection in organically coated galvanised steels using ion exchanged and naturally occurring clay mineral pigments10.1149/1.2215585 ↗