Preparation, Corrosion Resistance, and Electrochemical Properties of MnO2/TiO2 Coating on Porous Titanium
Source abstract
Abstract
In this work, MnO2/TiO2 coating on metallic porous titanium was prepared through a hydrothermal-based chemical method, followed by a chemical precipitation reaction of KMnO4 and MnSO4 aqueous solutions. The surface of the MnO2/TiO2/Ti was uniform and compact, with a high load capacity. The corrosion resistance and electrochemical properties of the MnO2/TiO2/Ti coating were investigated in comparison with those of pure Ti and TiO2 coatings. Cyclic voltammetry and constant current charge–discharge measurements showed that the MnO2/TiO2/Ti electrode presented good electrochemical performance. The MnO2/TiO2/Ti electrode had the highest capacitor performance compared to the other electrodes, and the nano-MnO2 coating significantly decreased the corrosion current densities. The nano-MnO2 coating exhibited excellent anti-corrosion properties at room temperature and better capacitance performance compared with pure Ti and TiO2 coatings. After surface modification, TiO2/Ti-coated MnO2 had better electrochemical behavior and significantly improved corrosion resistance than the TiO2/Ti nanocomposites. Its specific capacitance reached 314 F/g, which was 3.5 times that of the TiO2/Ti electrode material.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Supercapacitor Materials and Fabrication · Advanced battery technologies research · Electrocatalysts for Energy Conversion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Materials Science and Engineering, Shandong Jianzhu University, Fengming Road, Jinan 250101, China
Funding
the 2018 Doctoral Research Funds of Shandong Jianzhu University · Joint Fund Project for Natural Science Foundation of Shandong Province
References (45)
Show source-provided references
1. China’s new energy development: Status, constraints and reforms10.1016/j.rser.2015.09.054 ↗
2. Where Do Batteries End and Supercapacitors Begin10.1126/science.1249625 ↗
3. Simple Capacitors to Supercapacitors-An Overview10.1016/S1452-3981(23)15517-9 ↗
4. Materials for electrochemical capacitors10.1038/nmat2297 ↗
5. Fabrication of 9.6 V High-performance Asymmetric Supercapacitors Stack Based on Nickel Hexacyanoferrate-derived Ni(OH)2 Nanosheets and Bio-derived Activated Carbon10.1038/s41598-018-37566-8 ↗
6. Carbon-based materials as supercapacitor electrodes10.1039/b813846j ↗
7. A review of electrode materials for electrochemical supercapacitors10.1039/C1CS15060J ↗
8. Engineering of MnO2-based nanocomposites for high-performance supercapacitors
9. Facile electrodeposition route for the fabrication of Ni/Ni(OH)2 nanocomposite films with different supporting electrolytes and their Electrochemical properties10.1016/j.cplett.2022.139471 ↗
10. Flexible Zn2SnO4/MnO2 core/shell nanocable-carbon microfiber hybrid composites for highperformance supercapacitor electrodes10.1021/nl104205s ↗
11. Charge storage mechanism of MnO2 electrode used in aqueous electrochemical capacitor10.1021/cm049649j ↗
12. H-TiO2@MnO2//H-TiO2@C Core–Shell Nanowires for High Performance and Flexible Asymmetric Supercapacitors10.1002/adma.201203410 ↗
13. Hierarchically structured TiO2-MnO2 nanowall arrays as potential electrode material for high performance supercapacitors10.1016/j.ijhydene.2014.05.118 ↗
14. Three-dimensional ZnO@MnO2 core@shell nanostructures for electrochemical energy storage10.1039/c3cc41048j ↗
15. High-performance pseudocapacitor electrodes based on a-Fe2O3/MnO2 coreshell nanowire heterostructure arrays10.1021/jp4039573 ↗
16. Hydrogenated ZnO Core—Shell Nanocables for Flexible Supercapacitors and Self-Powered Systems10.1021/nn306044d ↗
17. Electrochemical properties of MnO2-deposited TiO2 nanotube arrays 3D composite electrode for supercapacitors10.1016/j.ijhydene.2015.05.014 ↗
18. Outstanding supercapacitive properties of Mn-doped TiO2 micro/nanostructure porous film prepared by anodization method10.1038/srep22634 ↗
19. Selfordered nanotubular TiO2 multilayers for high-performance photocatalysts and supercapacitors10.1016/j.electacta.2016.04.049 ↗
20. Preparation and properties of MnO2–TiO2 nanotube array composite electrodes using titanium foam as the current collector10.1016/j.ijhydene.2018.03.138 ↗
21. Synthesis of Few Layered MnO2 Nanosheets Encapsulated TiO2 Nanorods Electrode for Supercapacitor Application10.1149/MA2018-01/2/208 ↗
22. Efficient Photochemical Water Splitting by a Chemically Modified n-TiO210.1126/science.1075035 ↗
23. Highly crystallized mesoporous TiO2 films and their applications in dye sensitized solar cells10.1039/b417465h ↗
24. Coadsorption of Horseradish Peroxidase with Thionine on TiO2 Nanotubes for Biosensing10.1021/la050875x ↗
25. Protein Adsorption on Nanocrystalline TiO2 Films: An Immobilization Strategy for Bioanalytical Devices10.1021/ac980764l ↗
26. Electrochemical and bioactive characteristics of the porous surface formed on Ti-xNb alloys via plasma electrolytic oxidation10.1016/j.surfcoat.2019.125027 ↗
27. The effect of in-situ reactive incorporation of MoOx on the corrosion behavior of Ti-6Al-4 V alloy coated via micro-arc oxidation coating10.1016/j.corsci.2021.109764 ↗
28. Simultaneous improvement of corrosion resistance and bioactivity of a titanium alloy via wet and dry plasma treatments10.1016/j.jallcom.2020.156840 ↗
29. Zehra, T., Kaseem, M., Hossain, S., and Ko, Y.-G. (2021). Fabrication of a protective hybrid coating composed of TiO2, MoO2, and SiO2 by plasma electrolytic oxidation of titanium. Metals, 11.10.3390/met11081182 ↗
30. Hydrothermal Synthesis, Characterization, and Electrochemical Properties of MnO2-Titanate Nanotubes (MnO2-TNTs)10.1007/s11664-022-09550-6 ↗
31. Nanostructured Sheets of Ti―O Nanobelts for Gas Sensing and Antibacterial Applications10.1002/adfm.200701120 ↗
32. Hierarchical TiO2 nanonetwork—Porous Ti 3D hybrid photocatalysts for continuous-flow photoelectrodegradation of organic pollutants10.1039/C6CY02150F ↗
33. Dye-sensitized solar cell based on TiO2/MnO2 composite film as working electrode10.1088/1742-6596/877/1/012005 ↗
34. Preparation and Characterizations of Na2Ti3O7, H2Ti3O7 and TiO2 Nanobelts10.4028/www.scientific.net/AMR.306-307.1233 ↗
35. Rational Design of Hierarchically Porous Birnessite-Type Manganese Dioxides Nanosheets on Dif-ferent One-Dimensional Titania-Based Nanowires for High Per-formance Supercapacitors10.1016/j.jpowsour.2014.07.114 ↗
36. Synthesis and characterization of flowerlike MoS2 nanostructures through CTAB-assisted hydrothermal process10.1016/j.matlet.2012.07.014 ↗
37. Artificial lamellar mesostructures to WS2 nanotubes10.1021/ja012055m ↗
38. Hierarchical binder-free MnO2/TiO2 composite nanostructure on flexible seed graphite felt for high-performance supercapacitors10.1016/j.vacuum.2020.109648 ↗
39. Coaxial Carbon Nanofibers/MnO2 Nanocomposites as Freestanding Electrodes for High-Performance Electrochemical Capacitors10.1016/j.electacta.2011.07.140 ↗
40. Corrosion protection performance and interfacial interactions of polythiophene/silanes/MnO2 nanocomposite coatings on magnesium alloy in marine environment10.1080/1023666X.2021.1887627 ↗
41. Structure stability and corrosion resistance of nano-TiO2 coatings on aluminum in seawater by a vacuum dip-coating method10.1016/j.surfcoat.2010.09.028 ↗
42. Supercapacitor performances of MnO2 and MnO2/ reduced graphene oxide prepared with various electrodeposition time10.1016/j.vacuum.2020.109455 ↗
43. Highly flexible and transferable supercapacitors with ordered three-dimensional MnO2/Au/MnO2 nanospike arrays10.1039/C5TA01960E ↗
44. Graphene-Based Ultracapacitors10.1021/nl802558y ↗
45. Graphene double-layer capacitor with ac line-filtering performance10.1126/science.1194372 ↗