Cellulose-Graphene Bifunctional Paper Conservation Materials: For Reinforcement and UV Aging Protection
Source abstract
Abstract
Paper artifacts have unique cultural and historical values. However, over time, many paper artifacts appear with disease characteristics such as embrittlement and photoaging, losing the most fundamental function of the literature archive. The reinforcement handling of degraded paper artifacts is, therefore, a necessary measure to extend their service life, the key to which lies in the reinforcement and prevention of photoaging. This paper intended to use graphene oxide (GO) as a UV protective agent, carboxymethyl cellulose (CMC) as a reinforcement, and polyethyleneimine (PEI) as a modifier. In this work, the amino-modified graphene oxide carboxymethyl cellulose composite (CMC-aGO) was prepared by chemical modification, which was used as bifunctional paper protection material with anti-ultraviolet and reinforcement. It showed excellent performance in both tensile strength testing and UV resistance testing. The CMC-aGO raw material is low cost, colorless, transparent, simple to synthesize, convenient to operate, and is an excellent conservation material with dual functions of UV aging protection and paper reinforcement.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Cellulose Research Studies · Cultural Heritage Materials Analysis · Recycling and Waste Management Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Art and Media, Xi’an Technological University, Xi’an 710021, China
Shaanxi Institute for the Preservation of Culture Heritage, Xi’an 710075, China
References (36)
Show source-provided references
1. A new and highly efficient conservation treatment for deacidification and strengthening of aging paper by in-situ quaternization10.1016/j.carbpol.2019.01.034 ↗
2. Paper conservation methods: A literature review10.1007/s10570-015-0699-7 ↗
3. Barnat-Hunek, D., Grzegorczyk-Franczak, M., Klimek, B., Pavlikova, M., and Pavlik, Z. (2021). Properties of multi-layer renders with fly ash and boiler slag admixtures for salt-laden masonry. Constr. Build. Mater., 278.10.1016/j.conbuildmat.2021.122366 ↗
4. Identification of cellulose nitrate based adhesive repairs in archaeological pottery of the university of melbourne’s middle eastern archaeological pottery collection using portable ftir-atr spectroscopy and pca10.1186/s40494-016-0116-z ↗
5. Investigations of historical textiles from the imperial pavilion (hunkar kasri) of the new mosque eminonu-istanbul (turkey) by multiple analytical techniques10.1016/j.culher.2016.12.009 ↗
6. Conservation of historical reinforced concrete structures damaged by carbonation induced corrosion by means of electrochemical realkalisation10.1016/j.culher.2008.01.006 ↗
7. Atr-ftir characterization of old pressure sensitive adhesive tapes in historic papers10.1016/j.culher.2016.03.005 ↗
8. A study of mechanical properties of papers exposed to various methods of accelerated ageing. Part I: The effect of heat and humidity on original wood-pulp papers10.1016/j.culher.2008.07.009 ↗
9. Application of hydrophobically modified hydroxyethyl cellulose-methyl methacrylate copolymer emulsion in paper protection10.1515/npprj-2022-0015 ↗
10. Wu, X., Mou, H.Y., Fan, H.M., Yin, J.Y., Liu, Y.B., and Liu, J.A. (2022). Improving the flexibility and durability of aged paper with bacterial cellulose. Mater. Today Commun., 32.10.1016/j.mtcomm.2022.103827 ↗
11. Use of wet cellulose to cure shotcrete repairs on bridge soffits. Part 1: Field trial and observations10.1139/l06-023 ↗
12. Durability of chinese repair bamboo papers under artificial aging conditions10.1080/00393630.2019.1608706 ↗
13. Microfibrillated cellulose films for mending translucent paper: An assessment of film preparation and treatment application options10.1080/19455224.2021.2017314 ↗
14. Present status and applications of bacterial cellulose-based materials for skin tissue repair10.1016/j.carbpol.2012.10.071 ↗
15. Egertsdotter, E.M.U., and Aidun, C.K. (2007, January 14–16). Renewable materials for tissue repair/biocompatibility of cellulose nanocrystals. Proceedings of the 5th IASTED International Conference on Biomedical Engineering, Innsbruck, Austria.
16. A visible light rgb wavelength demultiplexer based on polycarbonate multicore polymer optical fiber10.1016/j.optlastec.2019.03.034 ↗
17. Gelkop, B., Aichnboim, L., and Malka, D. (2021). Rgb wavelength multiplexer based on polycarbonate multicore polymer optical fiber. Opt. Fiber Technol., 61.10.1016/j.yofte.2020.102441 ↗
18. Adhesives used in paper conservation: Chemical stability and fungal bioreceptivity10.1016/j.culher.2018.03.027 ↗
19. Rahman, M.S., Hasan, M.S., Nitai, A.S., Nam, S., Karmakar, A.K., Ahsan, M.S., Shiddiky, M.J., and Ahmed, M.B.J.P. (2021). Recent developments of carboxymethyl cellulose. Polymers, 13.10.3390/polym13081345 ↗
20. Carboxymethlycellulose used in ceramic glazes part iii: Influence of cmc characteristics on glaze slip and consolidated glaze layer properties
21. The evaluation of some consolidation agents applied in the conservation of graphical documents
22. Preparation and application of modified carboxymethyl cellulose si/polyacrylate protective coating material for paper relics
23. Farivar, F., Yap, P.L., Tung, T.T., and Losic, D. (2021). Highly water dispersible functionalized graphene by thermal thiolene click chemistry. Materials, 14.10.3390/ma14112830 ↗
24. Costa, M.C.F., Marangoni, V.S., Ng, P.R., Nguyen, H.T.L., Carvalho, A., and Neto, A.H.C. (2021). Accelerated synthesis of graphene oxide from graphene. Nanomaterials, 11.10.3390/nano11020551 ↗
25. Binder, J., Rogoza, J., Tkachenko, L., Pasternak, I., Sitek, J., Strupinski, W., Zdrojek, M., Baranowski, J.M., Stepniewski, R., and Wysmolek, A. (2021). Suspended graphene on germanium: Selective local etching via laser-induced photocorrosion of germanium. 2D Mater., 8.10.1088/2053-1583/abfedc ↗
26. All-optical technique to correlate defect structure and carrier transport in transferred graphene films10.1021/am401518y ↗
27. Probing graphene grain boundaries with optical microscopy10.1038/nature11562 ↗
28. Probing graphene grain boundaries and enhancing the electrical properties of graphene films by pt modification10.1016/j.matlet.2014.05.113 ↗
29. Saladino, M.L., Markowska, M., Carmone, C., Cancemi, P., Alduina, R., Presentato, A., Scaffaro, R., Bialy, D., Hasiak, M., and Hreniak, D. (2020). Graphene oxide carboxymethylcellulose nanocomposite for dressing materials. Materials, 13.10.3390/ma13081980 ↗
30. Ponnuchamy, V., and Esakkimuthu, E.S. (2022). Density functional theory study of lignin, carboxymethylcellulose and unsustainable binders with graphene for electrodes in lithium-ion batteries. Appl. Surf. Sci., 573.10.1016/j.apsusc.2021.151461 ↗
31. Carboxymethylcellulose/mof-5/graphene oxide bio-nanocomposite as antibacterial drug nanocarrier agent10.15171/bi.2019.02 ↗
32. Water-soluble reduced graphene oxide-carboxymethylcellulose hybrid nanomaterial for electrochemical biosensor design10.1002/cplu.201402017 ↗
33. Guan, H., Li, J., Zhang, B., and Yu, X. (2017). Synthesis, properties, and humidity resistance enhancement of biodegradable cellulose-containing superabsorbent polymer. J. Polym., 2017.10.1155/2017/3134681 ↗
34. Calcium alkoxides as alternative consolidants for wall paintings: Evaluation of their performance in laboratory and on site, on model and original samples, in comparison to conventional products10.1016/j.culher.2017.07.008 ↗
35. Carboxymethyl chitosan-functionalized graphene for label-free electrochemical cytosensing10.1016/j.carbon.2012.08.020 ↗
36. Carboxymethyl chitosan modified lipid nanoformulations as a highly efficacious and biocompatible oral anti-leishmanial drug carrier system10.1016/j.ijbiomac.2022.02.006 ↗