The Relationship between Solid Content and Particle Size Ratio of Waterborne Polyurethane
Source abstract
Abstract
A series of high solid content carboxylic acid/sulfonic acid waterborne polyurethanes was prepared by the emulsion dispersion method. The particle size and solid content were measured. By changing the particle size of the large particles to achieve different particle size ratios, high solid content waterborne polyurethanes were obtained at specific particle size ratios. When the particle size ratio was >7, 4–5 or 2–3, the aqueous polyurethane could reach a higher solid content (more than 56%). This indicated that solid content is related to particle size distribution in high solid content waterborne polyurethane. Moreover, the corresponding three-dimensional stacked models (simple cubic accumulation, face-centered cubic accumulation, cubic close packing and hexagonal closest packing) were established.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Polymer composites and self-healing · Silicone and Siloxane Chemistry · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Materials Science and Engineering, Beijing Institute of Technology, Beijing 100081, China
Department of Senior Middle School, Beijing Haidian Foreign Language Experiment School, Beijing 100095, China
References (20)
Show source-provided references
1. Cross-linking kinetics and swelling behaviour of aliphatic polyurethane10.1016/S0032-3861(99)00785-5 ↗
2. Polyurethane dispersions derived from polycarbonatediols and m-di(2-isocyanatopropyl) benzene10.1002/pen.21477 ↗
3. Newly UV-curable polyurethane coatings prepared by multifunctional thiol- and ene-terminated polyurethane aqueous dispersions mixtures: Preparation and characterization10.1016/j.polymer.2008.12.018 ↗
4. Recent advances in synthesis, characterization and rheological properties of polyurethanes and POSS/polyurethane nanocomposites dispersions and films10.1016/j.progpolymsci.2009.08.002 ↗
5. Puszka, A. (2018). Thermal and mechanical behavior of new transparent thermoplastic polyurethane elastomers derived from cycloaliphatic diisocyanate. Polymers, 10.10.3390/polym10050537 ↗
6. New thermoplastic polyurethane elastomers based on aliphatic diisocyanate: Synthesis and characterization10.1007/s10973-016-5923-7 ↗
7. High solid and high performance UV cured waterborne polyurethanes10.1016/j.colsurfa.2010.08.046 ↗
8. High solid and high stability waterborne polyurethanes via ionic groups in soft segments and chain termini10.1016/j.jcis.2009.03.028 ↗
9. Hydrolytic stability and physical properties of waterborne polyurethane based on hydrolytically stable polyol10.1016/j.colsurfa.2007.04.051 ↗
10. A comparative study of new linear and hyperbranched polyurethanes built up from a synthesized isocyanate-terminated polyester/urethane10.1007/s00289-017-1996-0 ↗
11. Polyurethane/aromatic polyamide sulfone copolymer dispersions from transesterified castor oil10.1007/s00289-016-1728-x ↗
12. Synthesis and characterization of aqueous (polyurethane/aromatic polyamide sulfone) copolymer dispersions from castor oil10.1016/j.porgcoat.2014.01.026 ↗
13. Preparation and properties of waterborne polyurethane–urea anionomers. I. The influence of the degree of neutralization and counterion10.1002/app.11249 ↗
14. Emulsifyable air drying urethane alkyds10.1016/j.porgcoat.2009.09.017 ↗
15. Synthesis and characterization of high solid content aqueous polyurethane dispersion10.1002/app.24627 ↗
16. Crystallinity evolution of soft segments during the synthesis of polyester-based waterborne polyurethane10.1002/app.40270 ↗
17. Preparation and performance of waterborne polyurethane with different particle sizes
18. A new method to synthesize high solid content waterborne polyurethanes by strict control of bimodal particle size distribution10.1016/j.porgcoat.2015.03.013 ↗
19. Electrochemical behavior of polyurethane ether electrolytes/carbon black composites and application to double layer capacitor10.1016/S0013-4686(00)00763-5 ↗
20. The preparation of high solid content waterborne polyurethane by special physical blending10.1016/j.porgcoat.2017.10.021 ↗