Friction Mechanism Features of the Nickel-Based Composite Antifriction Materials at High Temperatures
Source abstract
Abstract
The friction behavior of the formed antifriction films and their effect on the functional properties of the composite based on the powder nickel alloy EI929 with solid lubricant CaF2 at high temperatures was investigated. An antifriction film was formed on the contact surfaces during the friction process. Such a film was the result of the interaction of the contact surfaces with atmospheric oxygen at high temperatures. It contains oxides of alloying elements from materials of the frictional contact and solid lubricant calcium fluoride. The quantitative ratio of formed oxides depends on the temperature operating conditions of material. The data of thermodynamic simulation of the high-temperature interaction of the composite with oxygen coincide with the experimental data obtained by studying the fine structure of surface antifriction films. Antifriction films consist of oxide phases in combination with solid CaF2 lubricant. Anti-friction films provide high wear resistance of the self-lubricating composite in the range of temperatures 1073–1173 K due to the balance between the rate of their formation and wear. When the temperature exceeds 1200 K, the film loses its lubricating properties and acts as an abrasive substance due to the intense oxidation. Abrasive surfaces of materials were subjected also to microscopic examination, in which the mechanically mixed layer (MML) was described. The study of the friction surface roughness parameters confirmed the presence of the formed friction self-lubricating film and allowed to determine its parameters. The friction mechanism was the formation of an oxide layer combined with a solid lubricant, which provides high antifriction properties in the range of 1073–1273 K.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Tribology and Wear Analysis · Material Properties and Applications · Polymer Science and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Lightweight Elements Engineering, Foundry and Automation, Wroclaw University of Science and Technology, Lukasiewicza 7-9 str., 50371 Wroclaw, Poland
Igor Sikorsky Kyiv Polytechnic Institute, National Technical University of Ukraine, 37 Peremogy ave., 03057 Kyiv, Ukraine
Department of Mechanics, Materials and Biomedical Engineering, Wroclaw University of Science and Technology, Smoluchowskiego 25 str., 50370 Wroclaw, Poland
Department of Technical Systems Operation and Maintenance, Wroclaw University of Science and Technology, Smoluchowskiego 48 str., 50372 Wroclaw, Poland
References (49)
Show source-provided references
1. Tribological properties of nickel-based self-lubricating composite at elevated temperature and counterface material selection10.1016/j.wear.2007.09.005 ↗
2. High speed machining of aero-engine alloys10.1590/S1678-58782004000100001 ↗
3. Kostornow, A.G. (2012). Tribotechnical Materials Science, Publishing house Knowledge. (In Russian).
4. Abdel, M.W. (2019). Structure and properties of the new antifriction composite materials for high-temperature friction units. Lecture Notes in Mechanical Engineering, Springer.
5. Machining induced surface integrity in titanium and nickel alloys: A Review10.1016/j.ijmachtools.2010.11.003 ↗
6. Temperature dependence on tensile deformation mechanisms in a novel Nickel-based single crystal superalloy10.1016/j.msea.2020.138997 ↗
7. Study of wear mechanisms at high temperature scratch testing10.1016/j.wear.2017.04.027 ↗
8. Cui, G., Liu, Y., Gao, G., Liu, H., and Kou, Z. (2020). Microstructure and high-temperature wear performance of FeCr matrix self-lubricating composites from room temperature to 800 °C. Materials, 51.10.3390/ma13010051 ↗
9. Effect of secondary structures on the functional properties of high-speed sintered bearings for printing machines10.1007/s11106-015-9688-5 ↗
10. Friction, wear, and targeted synthesis of rubbing surfaces of self-lubricating composites10.1007/s11106-007-0018-4 ↗
11. High temperature tribological behaviors of (WAl)C–Co ceramic composites with the additions of fluoride solid lubricants10.1016/j.matchemphys.2015.07.039 ↗
12. Layered atomic structures of double oxides for low shear strength at high temperatures10.1016/j.scriptamat.2010.02.004 ↗
13. Development of predictable secondary structures in materials for high-temperature bearings10.1007/s11106-006-0116-8 ↗
14. Dry sliding wear behavior of Al2O3-TiC ceramic composites added with solid lubricant CaF2 by cold pressing and sintering10.1080/10402004.2014.962206 ↗
15. Tribological behaviour of self-lubricating materials at high temperatures10.1080/09506608.2017.1410944 ↗
16. Cui, G., Li, H., Gao, G., and Kou, Z. (2020). Design and high-temperature tribological properties of CoCrW with rare earth fluoride composites. J. Mater. Res. Technol.10.1016/j.jmrt.2019.12.072 ↗
17. High-temperature stability of YSZ and MSZ ceramic materials in CaF2–MgF2–MgO molten salt system10.1111/jace.15377 ↗
18. The influence of solid lubricant on tribological properties of sintered Ni–20%CaF2 composite material10.1016/j.ceramint.2019.05.262 ↗
19. Thermal, rheological, wettability and hard machining performance of MoS2 and CaF2 based minimum quantity hybrid nano-green cutting fluids10.1016/j.jmatprotec.2018.10.036 ↗
20. Friction and wear behavior of nickel-alloy-based high temperature self-lubricating composites against Si3N4 and Inconel 71810.1016/j.triboint.2014.03.005 ↗
21. Friction and wear behavior of Ni-based solid-lubricating composites at high temperature in a vacuum environment10.1016/j.matdes.2017.03.030 ↗
22. Structure design of Al2O3/TiC/CaF2 multicomponent gradient self-lubricating ceramic composite and its tribological behaviors10.1016/j.ceramint.2017.12.199 ↗
23. Wear behavior of cold pressed and sintered Al2O3/TiC/CaF2-Al2O3/TiC laminated ceramic composite10.1007/s40195-012-0247-5 ↗
24. Chen, Z., Guo, N., Ji, L., and Xu, C. (2019). Synthesis of CaF2 nanoparticles coated by SiO2 for improved Al2O3/TiC self-lubricating ceramic composites. Nanomaterials, 9.10.3390/nano9111522 ↗
25. Materials, properties, manufacturing methods and cutting performance of innovative ceramic cutting tools—A review
26. High temperature solid-lubricating materials: A review10.1016/j.triboint.2018.12.037 ↗
27. The study of wear characteristics of sintered high speed steels containing CaF2, MnS and TiC additives at elevated temperature10.1016/j.wear.2004.01.016 ↗
28. Laser alloying of bearing steel with boron and self-lubricating addition10.1515/amtm-2016-0002 ↗
29. Microstructure and high temperature tribological behavior of Fe3Al–Ba0.25 Sr0.75 SO4 self-lubricating composites10.1016/j.triboint.2016.04.011 ↗
30. Evolution of dislocation structure and deformation resistance in creep exemplified on single crystals of CaF210.1016/j.msea.2008.04.086 ↗
31. Friction and wear behaviour of Fe-Cu-C based self-lubricating material with CaF2 as solid lubricant10.1108/ILT-04-2016-0085 ↗
32. GOST 5632-2014 (2015). Stainless Steels and Corrosion Resisting, Heat-Resisting and Creep Resisting Alloys, Grades, Interstate Council for Standardization, Metrology and Certification (ISC).
33. Self-lubricating mechanisms via the in situ formed tribofilm of sintered ceramics with CaF2 additions when sliding against hardened steel10.1016/j.ijrmhm.2006.04.010 ↗
34. Gray, P., and Scott, S.K. (1994). Chemical Oscillations and Instabilities: Non-Linear Chemical Kinetics, Clarendon Press.
35. Nonlinear chemical dynamics
36. Study of wear processes of weld clads10.12776/ams.v20i2.293 ↗
37. Samal, P.J., and Newkirk, J. (2015). ASM Handbook, Volume 7: Powder Metallurgy, ASM International.10.31399/asm.hb.v07.9781627081757 ↗
38. Refractory materials for energy applications10.1002/ente.201600571 ↗
39. Lockman, Z. (2019). 1-Dimensional Metal Oxide Nanstructures: Growth, Properties, and Devices, CRC Press, Taylor&Francis Group.10.1201/9781351266727 ↗
40. Graf, M., Ullmann, M., Korpala, G., Wester, H., Awiszus, B., Kawalla, R., and Behrens, B.-A. (2018). Forming and oxidation behavior during forging with consideration of carbon content of steel. Metals, 8.10.3390/met8120996 ↗
41. Review of the high-temperature oxidation of iron and carbon steels in air or oxygen10.1023/A:1023685905159 ↗
42. Basuki, E.A., Nababan, D.C., Muhammad, F., Korda, A.A., and Prajitno, D.H. (2019). Isothermal oxidation behaviour of 69.5Fe-14Ni-9Al-7.5Cr alloy at high temperatures. Int. J. Coros, 8517648.10.1155/2019/8517648 ↗
43. Scendo, M., Zorawski, W., and Goral, A. (2019). Influence of nickel powders on corrosion resistance of cold sprayed coatings on Al7075 substrate. Metals, 9.10.3390/met9080890 ↗
44. The iron effect on oxidation and interdiffusion behaviour in MCrAlX coated Ni-base superalloys10.1016/j.matdes.2019.107599 ↗
45. Characterization of plastic deformation induced by machining in a Ni-based superalloy10.1016/j.msea.2020.139104 ↗
46. Manufacturing, physical and tribological properties of Cu-ETP based MMC strengthened with Al2O3 particles
47. Oxidation of nickel and transport properties of nickel oxide10.1016/j.jpcs.2004.03.011 ↗
48. Introduction: Self-organization in nonequilibrium chemical systems10.1063/1.2354477 ↗
49. Scale levels of damage to the raceway of a spherical roller bearing10.1016/j.engfailanal.2015.11.019 ↗