Electrochemical Impedance Spectroscopy Investigation on the Corrosive Behaviour of Waterborne Silicate Micaceous Iron Oxide Coatings in Seawater
Source abstract
Abstract
The anticorrosive composite coatings based on waterborne silicate were prepared to replace existing solvent-based coatings suitable for ships. A series of composite coatings were prepared by adding zinc powder and micaceous iron oxide to the waterborne silicate resin. The adhesion, pencil hardness and impact resistance of the coatings were investigated and corrosion performance in seawater is characterized by electrochemical impedance spectroscopy (EIS). The results show that coatings have excellent adhesion and impact resistance and their pencil hardness can reach up to 4H. During the immersion of composite coatings in seawater for 8 h, only one time constant appears in the Bode plot, coating capacitance (Qc) gradually increases but dispersion coefficient (n) and coating resistance (Rc) gradually decrease. The breakpoint frequency formula was deduced, considering the dispersion effect. With the increase of micaceous iron oxide, the fluctuation of breakpoint frequency with immersion time is weakened. It can be used to evaluate the corrosion resistance of inorganic anticorrosive coatings in seawater. In addition, different penetration models of corrosive media were proposed for the coatings with low or high content of micaceous iron oxide.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Concrete Corrosion and Durability · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Materials Science and Engineering, Dalian Maritime University, Dalian 116026, China
Dalian Jinzhong (Lvshun) Heavy Industry Co., Ltd., Dalian 116041, China
Funding
Project of Equipment Pre-research Field Fund · Equipment Pre-research Sharing Technology Project
References (53)
Show source-provided references
1. Wang, G.P. (2006). Marine Coating and Coating Technology, Chemical Industry Press. [2nd ed.].
2. Wang, N., Cheng, K.Q., Zhang, J., Zhang, D., and Kang, P. (2012). Method for preparing polyaniline modified mesoporous molecular sieve anticorrosion coating. (201210109355.5), CN Patent.
3. Investigation on anticorrosion performance of polyaniline-mesoporous MCM-41 composites in new water-based epoxy coating10.1002/maco.201307458 ↗
4. Investigation on anticorrosion performance of nano and micro polyaniline in new water-based epoxy coating10.1016/j.porgcoat.2011.05.007 ↗
5. Using nanoemeraldine salt-polyaniline for preparation of a new anticorrosive water-based epoxy coating10.1016/j.porgcoat.2010.03.005 ↗
6. Waterborne epoxy nanocoatings modified by nanoemulsions and nanoparticles10.1016/j.jmst.2014.01.004 ↗
7. Corrosion resistance of waterborne epoxy coating pigmented by nano-sized aluminium powder on steel10.1007/s11771-012-0971-z ↗
8. Jiang, C. (2015). A waterborne metal anticorrosion coating. (201410488980.4), CN Patent.
9. Yao, Z.J., Li, L., Zhou, J.T., Li, T.M., and Liu, P.J. (2014). Marine anticorrosion coating. (201410337820.X), CN Patent.
10. Preparation, characterization of UV-Curable Waterborne Polyurethane-Acrylate and the application in metal iron surface protection10.1002/app.39539 ↗
11. Ding, Y.S., Ding, Y.Q., Fang, H.G., and Yang, S.Z. (2014). An ultraviolet curing waterborne epoxy-polyurethane-acrylate copolymer resin-based anticorrosion paint and preparation method. (201410275754.8), CN Patent.
12. Effect of nano-ZnO particles on the corrosion resistance of polyurethane-based waterborne coatings immersed in sodium chloride solution via EIS technique10.1016/j.porgcoat.2013.04.013 ↗
13. Highly dispersive waterborne polyurethane/ZnO nanocomposites for corrosion protection10.1007/s11998-015-9674-3 ↗
14. Nanoferrite dispersed waterborne epoxy-acrylate: Anticorrosive nanocomposite coatings10.1016/j.porgcoat.2014.11.023 ↗
15. Study on Synthesis of nano-SiO2/polyacrylate compound antirust emulsion
16. A study of the corrosion resistance of a waterborne acrylic coating modified with nano-sized titanium dioxide10.1016/j.porgcoat.2011.09.004 ↗
17. In-Situ AFM and EIS Study of waterborne acrylic latex coatings for corrosion protection of carbon steel10.1149/2.0851501jes ↗
18. On structure and oxidation behaviour of non-stoichiometric amorphous aluminium phosphate coating10.1080/02670844.2018.1560912 ↗
19. Mechanical and biological properties of electrodeposited calcium phosphate coatings10.1016/j.msec.2019.03.020 ↗
20. Control of degradation rate of Mg alloys using silica sol-gel coatings for biodegradable implant materials10.1007/s10971-018-4824-6 ↗
21. Preparation of MoSi2-SiC-Al2O3-SiO2 coating on mullite fibrous insulation with silica sol as binder by non-firing process10.1016/j.ceramint.2018.10.197 ↗
22. Effect of graphene on corrosion resistance of waterborne inorganic zinc-rich coatings10.1016/j.jallcom.2018.09.315 ↗
23. Silicate coating to prevent leaching from radiolabeled surrogate far-field fallout in aqueous environments10.1016/j.chemosphere.2019.01.104 ↗
24. Research and development trend of environmentally friendly anticorrosive and antifouling coatings for hulls
25. Optimising the corrosion protective abilities of lamellar micaceous iron oxide containing primers10.1108/00035590010344321 ↗
26. Anticorrosive coatings: A review10.1007/s11998-008-9144-2 ↗
27. Evaluation of the corrosion resistance of an epoxy-polyamide coating containing different ratios of micaceous iron oxide/Al pigments10.1016/j.corsci.2011.01.045 ↗
28. Influences of glass flakes on fire protection and water resistance of waterborne intumescent fire resistive coating for steel structure10.1016/j.porgcoat.2010.10.007 ↗
29. Flake alignment in composite coatings10.1016/j.memsci.2003.09.022 ↗
30. Evaluation of cathodic protection behavior of waterborne inorganic zinc-rich silicates containing various contents of MIO pigments10.1108/00035591311287438 ↗
31. An impedance model for the estimation of water absorption in organic coatings. Part II: A complex equation of mixture10.1016/S0010-938X(03)00015-5 ↗
32. Influence of the photo-oxidative degradation on the water barrier and corrosion protection properties of polyester paints10.1016/S0010-938X(96)00062-5 ↗
33. Correlation of morphology and barrier properties of thin microwave plasma polymer films on metal substrate10.1016/j.electacta.2003.12.030 ↗
34. Electrical measurements in the study of immersed paint coatings on metal. I. Comparison between capacitance and gravimetric methods of estimating water uptake
35. An impedance model for the estimation of water absorption in organic coatings. Part I: A linear dielectric mixture equation10.1016/S0010-938X(03)00014-3 ↗
36. Assessment of water uptake in coil coatings by capacitance measurements10.1016/S0300-9440(02)00190-X ↗
37. Evaluation and investigation of surface treatment of industrial coatings by impedance spectroscopy10.1179/026708404225016418 ↗
38. A variant of the Brasher–Kingsbury equation10.1016/j.corsci.2003.10.001 ↗
39. Evaluation of protectiveness of organic coatings by means of high-frequency EIS measurement
40. Study on the curing mechanism of sodium silicate inorganic zinc-rich coating
41. Peng, G.Y. (2012). Preparation and Properties of Waterborne Inorganic Coatings with Potassium Silicate/Silica Sol as Film-Forming Substance. [Master’s Thesis, South China University of Technology].
42. Zhou, C.J. (2014). Preparation of Silicate Waterborne Inorganic Zinc-Rich Anticorrosion Coatings and Studies on Its Performance. [Master’s Thesis, Shenyang University of Technology].
43. (1980). GB/T 1720-1979 Method of Test for Adhesion of Paint Films, China Petroleum and Chemical Industry Federation.
44. (2007). GB/T 6739-2006 Paints and Varnishes-Determination of Film Hardness by Pencil Test, China Petroleum and Chemical Industry Federation.
45. (1993). GB/T 1732-1993 Determination of Impact Resistance of Film, China Petroleum and Chemical Industry Federation.
46. Studies on estimating methods of polarization performance for coated steel in seawater10.4028/www.scientific.net/MSF.654-656.2418 ↗
47. Resistance of solid surfaces to wetting by water10.1021/ie50320a024 ↗
48. Jiang, L., and Feng, L. (2007). Bionic Intelligent Nano Interface Material, Chemical Industry Press.
49. Corrosion resistance of epoxy phosphate/waterborne epoxy coatings on steel
50. Self-aligned graphene as anticorrosive barrier in waterborne polyurethane composite coatings10.1039/C4TA02262A ↗
51. Cao, C.N., and Zhang, J.Q. (2002). Introduction to Electrochemical Impedance Spectroscopy, Science Press.
52. Investigation of effect of aluminium powder on performance of epoxy coatings by breakpoint frequency method
53. Corrosion protection by organic coatings