Research Progress of Self-Cleaning, Anti-Icing, and Aging Test Technology of Composite Insulators
Source abstract
Abstract
Composite insulators are widely used in power systems because of their advantages of light weight, good pollution resistance, and high mechanical strength. With the increasingly serious environmental pollution problem, especially in winter at high latitudes, composite insulators are easily affected by fog, bird droppings, algae, and icing. Long-term exposure to the outdoor insulator surface will cause aging, which will then pose ae potential safety hazard to the stable operation of insulators. Therefore, the self-cleaning, anti-icing, and aging test technologies of composite insulators are particularly important. This paper introduces the research progress and current situation of self-cleaning, anti-icing surface preparation, and aging test technology of composite insulators, and looks forward to the future development of composite insulators.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High voltage insulation and dielectric phenomena · Smart Materials for Construction · Surface Modification and Superhydrophobicity
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
College of Mechanical and Electrical Engineering, Gansu Agricultural University, Lanzhou 730070, China
College of Civil Aviation Safety Engineering, Civil Aviation Flight University of China, Guanghan 618307, China
Funding
National Modern Agricultural Industry Technology System
References (100+)
Show source-provided references
1. Aging of silicone rubber-based composite insulators under multi-stressed conditions: An overview10.1088/2053-1591/ab3f0d ↗
2. Lu, M. (2020). Insulator Application and Fault Case Analysis, China Power Press.
3. Effect of coldfog on the corona induced degradation of silicone rubber samples10.1109/TDEI.2015.7116368 ↗
4. Corona degradation of the polymer insulator samples under different fog conditions10.1109/TDEI.2015.005256 ↗
5. Zhang, Z., Liang, T., Li, C., Jiang, X., Wu, J., and Wu, B. (2020). Electrical strength and physicochemical performances of HTV silicone rubber under salt-fog environment with DC energized. Polymers, 12.10.3390/polym12020324 ↗
6. Hydrophobicity characteristics of algae-fouled HVDC insulators in subtropical climates10.1016/j.epsr.2017.11.009 ↗
7. Research of biological contamination and its effect on the properties of RTV-coated insulators10.1016/j.epsr.2018.10.025 ↗
8. Influence of algae growth on the external insulation performance of HVDC insulators10.1109/TDEI.2018.006662 ↗
9. Simulation experimental study on bird droppings flashover characteristics of transmission lines in tropical areas
10. Study on bird droppings flashover characteristics of composite insulators for 330 kV transmission lines
11. Experimental investigation on composite insulators AC flashover performance with fan-shaped non-uniform pollution under electro-thermal stress10.1016/j.ijepes.2020.106142 ↗
12. Mechanical and Electrical Properties of Cycloaliphatic Epoxy/Silica Systems for Electrical Insulators for Outdoor Applications10.4313/TEEM.2015.16.2.82 ↗
13. Zhao, M., Li, W., Wu, Y., Zhao, X., Tan, M., and Xing, J. (2019). Performance Investigation on Different Designs of Superhydrophobic Surface Texture for Composite Insulator. Materials, 12.10.3390/ma12071164 ↗
14. Development of composite insulators in China10.1109/94.798115 ↗
15. Analysis of in-service composite insulators used in overhead railway traction10.1016/j.engfailanal.2019.104227 ↗
16. Zero emission targets as long-term global goals for climate protection10.1088/1748-9326/10/10/105007 ↗
17. Energy Transitions Commission (2019). China 2050: A Fully Developed Rich Zero-Carbon Economy.
18. China’s flexibility challenge in achieving carbon neutrality by 206010.1016/j.rser.2022.112112 ↗
19. Toward carbon-neutral electricity and mobility: Is the grid infrastructure ready?10.1016/j.joule.2021.06.011 ↗
20. Evaluating long-term emission impacts of large-scale electric vehicle deployment in the US using a human-Earth systems model10.1016/j.apenergy.2021.117364 ↗
21. Towards a low carbon economy by removing fossil fuel subsidies?10.1016/j.chieco.2018.03.006 ↗
22. Li, C., Yang, Y., Xu, G., Zhou, Y., Jia, M., Zhong, S., Gao, Y., Park, C., Liu, Q., and Wang, Y. (2022). Insulating materials for realising carbon neutrality: Opportunities, remaining issues and challenges. High Volt.10.1049/hve2.12232 ↗
23. Composite Insulator’s Hydrophobicity Detection Method Based on Sparse Representation Classification Algorithm
24. Hydrophobicity changes in silicone rubbers10.1109/TDEI.1999.9286748 ↗
25. DC pollution flashover performance of HVDC composite insulator under different non-uniform pollution conditions10.1016/j.epsr.2020.106351 ↗
26. Study on AC Artificial-Contaminated Flashover Performance of Various Types of Insulators10.1109/TPWRD.2007.899760 ↗
27. Study on AC pollution flashover performance of composite insulators at high altitude sites of 2800-4500 m10.1109/TDEI.2009.4784559 ↗
28. Preparation strategy and evaluation method of durable superhydrophobic rubber composites10.1016/j.cis.2021.102549 ↗
29. Investigation of self-cleaning and bouncing properties of superhydrophobic alu-minum nitride/silicone rubber10.1002/app.51990 ↗
30. Study on hydrophobic properties of fluororubber prepared by template method under high temperature conditions10.1016/j.colsurfa.2020.125837 ↗
31. Fabrication of self-cleaning superhydrophobic silicone rubber insulator through laser texturing10.1080/02670844.2020.1780673 ↗
32. Flashover characteristics of discrete water droplets on the surface of super-hydrophobic silicone rubber10.1109/TDEI.2014.004281 ↗
33. A superhydrophobic surface with aging resistance, excellent mechanical restorablity and droplet bounce properties10.1039/D0SM00462F ↗
34. Anti-icing Performance of a Superhydrophobic PDMS/Modified Nano-silica Hybrid Coating for Insulators10.1163/016942411X574826 ↗
35. Robust Mg(OH)2/epoxy resin superhydrophobic coating applied to composite insulators10.1016/j.apsusc.2018.10.039 ↗
36. Dynamic behavior of water droplets and flashover characteristics on a superhydrophobic silicone rubber surface10.1063/1.4983714 ↗
37. Icing behavior of water droplets impinging on cold superhydrophobic surface10.1016/j.surfcoat.2019.02.035 ↗
38. Superhydrophobic Coatings for Improved Performance of Electrical Insulators10.1002/mame.201800313 ↗
39. Suppression of surface charge on micro- and nano-structured superhydrophobic silicone rubber10.1109/TDEI.2018.007008 ↗
40. Compare study between icephobicity and superhydrophobicity10.1016/j.physb.2018.12.014 ↗
41. On Hydrophobic and Icephobic Properties of TiO2-Doped Silicon Rubber Coatings
42. Effect of Superhydrophobic Coating on the Anti-Icing and Deicing of an Airfoil10.2514/1.C033828 ↗
43. Strategies for anti-icing: Low surface energy or liquid-infused?10.1039/C6RA11383D ↗
44. Micro–Nano-Nanowire Triple Structure-Held PDMS Superhydrophobic Surfaces for Robust Ultra-Long-Term Icephobic Performance10.1021/acsami.2c02992 ↗
45. Accelerated aging effect on high temperature vulcanized sili-cone rubber composites under DC voltage with controlled environmental conditions10.1016/j.engfailanal.2020.104870 ↗
46. Jing, P., Zhiqiang, L., Peng, W., Qian, J., Chunjie, W., and Yuxin, L. (2020, January 13–17). Research on Ultraviolet Aging Properties of Modified Silicone Rubber for Composite Insulator. Proceedings of the 2020 International Symposium on Electrical Insulating Materials (ISEIM), Tokyo, Japan.
47. Wakhidin, M. (2019, January 1–4). Effects of artificial tropical climate aging on insulation performance of silicone rubber polymeric insulators. Proceedings of the 2019 2nd International Conference on High Voltage Engineering and Power Systems (ICHVEPS), Denpasar, Indonesia.10.1109/ICHVEPS47643.2019.9011130 ↗
48. Aging characterization of high temperature vulcanized silicone rubber housing material used for outdoor insulation10.1109/TDEI.2015.7076797 ↗
49. Amin, M., Mahmood, A., and Khattak, A. (2020, January 14–18). Accelerated multi stress aging and life estimation of polymeric insulators. Proceedings of the 2020 17th International Bhurban Conference on Applied Sciences and Technology (IBCAST), Islamabad, Pakistan.
50. AC Flashover Voltage Model for Polluted Suspension Insulators and an Experimental Investigation in Salt Fog10.1109/ACCESS.2020.3030326 ↗
51. Contamination deposition and discharge characteristics of outdoor insulators in fog-haze condi-tions10.1016/j.ijepes.2020.106176 ↗
52. Pollution Flashover Characteristics of High-Voltage Outdoor Insulators: Analytical Study10.1007/s13369-021-05745-x ↗
53. Pollution Flashover Under Different Contamination Profiles on High Voltage Insulator: Numerical and Experiment Investigation10.1109/ACCESS.2021.3063201 ↗
54. 50 years in icing performance of outdoor insulators10.1109/MEI.2014.6701103 ↗
55. Potential of slippery liquid infused porous surface coatings as flashover inhibitors on porcelain insulators in icing, contaminated, and harsh environments10.1016/j.porgcoat.2020.106082 ↗
56. Preparation of superhydrophobic paper mulch and study on its anti-UV performance10.1016/j.jscs.2021.101322 ↗
57. Study on preparation and properties of superhydrophobic surface of RTV silicone rubber10.1016/j.jmrt.2020.12.074 ↗
58. Preparation of superhydrophobic conductive CNT/PDMS film on paper by foam spraying method10.1016/j.colsurfa.2022.129327 ↗
59. Recent advances in the mechanical durability of superhydrophobic materials10.1016/j.cis.2015.12.007 ↗
60. Recent progress in superhydrophobic coatings used for steel protection: A review10.1016/j.colsurfa.2016.12.057 ↗
61. A fast method to fabricate superhydrophobic surfaces on zinc substrate with ion assisted chemical etching10.1016/j.apsusc.2014.03.183 ↗
62. Chemically Stable and Mechanically Durable Superamphiphobic Aluminum Surface with a Micro/Nanoscale Binary Structure10.1021/am503441x ↗
63. Transparent, durable and thermally stable PDMS-derived superhydrophobic surfaces10.1016/j.apsusc.2015.02.157 ↗
64. Ceramic Pore Channels with Inducted Carbon Nanotubes for Removing Oil from Water10.1021/am300207b ↗
65. Analysis of wear abrasion resistance of superhydrophobic acrylonitrile butadiene styrene rubber (ABS) nanocomposites10.1016/j.cej.2015.06.086 ↗
66. Super-hydrophobic zinc oxide/silicone rubber nanocomposite surfaces10.1016/j.surfin.2018.12.008 ↗
67. Robust biomimetic-structural superhydrophobic surface on aluminum alloy10.1021/am505582j ↗
68. Fluoroalkyl Silane Modified Silicone Rubber/Nanoparticle Composite: A Super Durable, Robust Superhydrophobic Fabric Coating10.1002/adma.201200184 ↗
69. Superhydrophobic cuprous oxide nanostructures on phosphor-copper meshes and their oil-water separation and oil spill cleanup10.1021/am507620s ↗
70. Cocoon-in-Web-Like Superhydrophobic Aerogels from Hydrophilic Polyurea and Use in Environmental Remediation10.1021/am500685k ↗
71. Investigation of superhydrophobic/hydrophobic materials properties using electrospinning technique10.21123/bsj.2019.16.3.0632 ↗
72. Superhydrophobic, Reversibly Elastic, Moldable, and Electrospun (SupREME) Fibers with Multimodal Functions: From Oil Absorbents to Local Drug Delivery Adjuvants10.1002/adfm.201702310 ↗
73. Superhydrophobic nanostructured ZnO thin films on aluminum alloy substrates by electrophoretic deposition process10.1016/j.apsusc.2014.11.170 ↗
74. Multifunctional polypyrene/silica hybrid coatings with stable excimer fluorescence and robust superhydrophobicity derived from electrodeposited polypyrene films10.1039/C4TC02653E ↗
75. Fabrication o.zf a superhydrophobic surface from porous polymer using phase separation10.1016/j.apsusc.2014.01.053 ↗
76. Composite insulators and their aging: An overview10.1007/s11431-007-0053-x ↗
77. Influence of electric field on the ice-coating process of insulators with a different dielectric sur-face10.1049/iet-smt.2018.5570 ↗
78. Effect on superhydrophobic surfaces on electrical porcelain insulator, improved technique at polluted areas for longer life and reliability10.14419/ijet.v4i4.5405 ↗
79. Patterned superhydrophobic metallic surfaces10.1021/la8037582 ↗
80. Nanosecond laser textured superhydrophobic metallic surfaces and their chemical sensing applications10.1016/j.apsusc.2015.09.027 ↗
81. Superhydrophobic surfaces fabricated by microstructuring of stainless steel using a femtosecond laser10.1016/j.apsusc.2009.07.061 ↗
82. Preparation and basic properties of superhydrophobic silicone rubber with micro-nano hierarchical structures formed by picosecond laser-ablated template10.1109/TDEI.2017.005924 ↗
83. Hydrophobicity, surface charge and DC flashover characteristics of direct-fluorinated RTV silicone rubber10.1109/TDEI.2015.7076794 ↗
84. Micro-nanostructured polymer surfaces using injection molding: A review10.1016/j.mtcomm.2017.09.013 ↗
85. A simple method for preparing super-hydrophobic powder from paper sludge ash10.1016/j.matlet.2014.11.123 ↗
86. Self-organized micro/nano structures in metal surfaces by ultrafast laser irradiation10.1016/j.optlaseng.2010.04.010 ↗
87. One-step fabrication of near super-hydrophobic aluminum surface by nano-second laser ablation10.1016/j.apsusc.2015.06.104 ↗
88. Hierarchical structural nanopore arrays fabricated by pre-patterning aluminum using nanosphere lithography10.1002/smll.201102274 ↗
89. Techniques for the fabrication of super-hydrophobic surfaces and their heat transfer applications
90. Super-Hydrophobic Properties of Aluminum Surfaces Synthesized by a Two-Step Chemical Etching Process10.1166/jnn.2019.17060 ↗
91. One-step method for fabrication of biomimetic superhydrophobic surface on aluminum alloy10.1016/j.colsurfa.2014.11.017 ↗
92. Development of stable superhydrophobic coatings on aluminum surface for corro-sion-resistant, self-cleaning, and antiicing applications10.1016/j.matdes.2015.12.155 ↗
93. Facile fabrication of superhydrophobic nanos-tructures on aluminum foils with controlled-condensation and delayed-icing effects10.1016/j.apsusc.2012.05.032 ↗
94. Injection moulding antireflective nanostructures10.1016/j.mee.2014.03.027 ↗
95. Mold machining and injection molding of diffractive microstructures10.1016/j.jmapro.2017.02.014 ↗
96. Injection compression molding of high-aspect-ratio nanostructures
97. Characterization of the micro injection-com-pression molding process for the replication of high aspect ratio micro-structured surfaces10.1007/s00542-016-3149-z ↗
98. A reflow process for glass microlens array fabrication by use of precision compression molding10.1088/0960-1317/18/5/055022 ↗
99. Fabrication of transparent superhydrophobic surface on thermoplastic polymer using laser beam machining and compression molding for mass production10.1016/j.cirp.2014.03.085 ↗
100. Bulk metallic glass mold for high volume fabrication of micro optics10.1007/s00542-014-2395-1 ↗