Comparative Study of Tribological and Corrosion Characteristics of TiCN, TiCrCN, and TiZrCN Coatings
Source abstract
Abstract
Coatings based on titanium carbonitride alloyed with zirconium and chromium were deposited using the method of reactive magnetron sputtering on the surface of titanium VT1–0. The effect of alloying titanium carbonitride with zirconium and chromium on the tribo- and corrosion properties of the coating has been studied. Coatings with different compositions were formed by changing the ratio of alloying elements to titanium in a single target. To study the obtained coatings, a scanning electron microscopy, nanoindentation, sliding wear test (ball on disk method), and corrosion tests in 0.5 M Na2SO4 and 30% NaCl solution were used. As a result of wear and corrosion tests, friction coefficients, mass index, and corrosion rate of alloyed and pure titanium carbonitride coatings were obtained. The average coefficient of friction of the coatings varied in the range of 0.17–0.31. The values of nanohardness are determined depending on the composition of the coatings. From corrosion data, it is determined that TiCrCN and TiZrCN coatings exhibit better corrosion properties compared to TiCN coatings. As a result of the dependences obtained, the preferred composition of the coating, the most resistant to wear and corrosion damage, was revealed.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Advanced materials and composites · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
The Institute of Metallurgy and Ore Beneficiation, Satbayev University NJSC, Almaty 050013, Kazakhstan
Faculty of Mechanical Engineering, Wroclaw University of Science and Technology, 50-370 Wroclaw, Poland
Funding
Ministry of Education and Science of the Republic of Kazakhstan
References (44)
Show source-provided references
1. Wear and corrosion resistance of titanium carbo-nitride coated Al-7075 produced through PVD10.1007/s12034-020-2069-9 ↗
2. The microstructure and wear resistance of microarc oxidation composite coatings containing nano-hexagonal boron nitride (HBN) particles10.1007/s11665-017-2582-1 ↗
3. Physical and mechanical properties investigation of oxide coatings on titanium
4. Almagul, U., Bagdaulet, K., Murat, O., Azamat, Y., and Kaysar, K. (2019, January 28). Investigations of waste sludge of titanium production and its leaching by nitric acid. Proceedings of the International Multidisciplinary Scientific Geoconference Surveying Geology and Mining Ecology Management SGEM, Albena, Bulgaria.
5. Plasma electrolytic oxidation technology for producing protective coatings of aluminum alloys
6. Double-layer coatings on WC-Co hardmetals containing diamond and titanium carbide/nitride10.1016/S0925-9635(00)00214-4 ↗
7. Corrosion resistance appraisal of TiN, TiCN and TiAlN coatings deposited by CAE-PVD method on WC–Co cutting tools exposed to artificial sea water10.1016/j.apsusc.2015.08.041 ↗
8. Inclined impact-sliding wear tests of TiN/Al2O3/TiCN coatings on cemented carbide substrates10.1016/j.surfcoat.2011.09.067 ↗
9. Effect of TiAlN PVD coatings on corrosion performance of WC–6%Co10.1179/174329408X326399 ↗
10. Rakhadilov, B., Buitkenov, D., Idrisheva, Z., Zhamanbayeva, M., Pazylbek, S., and Baizhan, D. (2021). Effect of Pulsed-Plasma Treatment on the Structural-Phase Composition and Tribological Properties of Detonation Coatings Based on Ti–Si–C. Coatings, 11.10.3390/coatings11070795 ↗
11. Influence of cutting speed and workpiece material on the wear mechanisms of CVD TiCN/A-Al2O3 coated cutting inserts during turning10.1016/j.wear.2017.11.019 ↗
12. (Zr,Ti)CN coatings as potential candidates for biomedical applications10.1016/j.surfcoat.2011.03.074 ↗
13. Study on tribological behavior and cutting performance of CVD diamond and DLC films on Co-cemented tungsten carbide substrates10.1016/j.apsusc.2009.10.092 ↗
14. Investigation of microdiamonds obtained by the oxygen-acetylene torch method10.18321/ectj647 ↗
15. Microstructure and mechanical properties of TiN/TiCN/TiC multilayer thin films deposited by magnetron sputtering
16. Microstructure, mechanical and tribological properties of TiCN nanocomposite films deposited by DC magnetron sputtering10.1016/j.surfcoat.2011.05.034 ↗
17. Structural characterization and adhesion appraisal of TiN and TiCN coatings deposited by CAE-PVD technique on a new carbide composite cutting tool10.1080/01694243.2015.1075857 ↗
18. Oxidation behavior of titanium carbonitride coating deposited by atmospheric plasma spray synthesis10.1007/s11666-017-0620-z ↗
19. Synthesizing, microstructure and microhardness distribution of Ti−Si−C−N/TiCN composite coating on Ti−6Al−4V by laser cladding10.1016/j.surfcoat.2012.12.038 ↗
20. Microstructure and corrosion behavior of TiC/Ti(CN)/TiN multilayer CVD coatings on high strength steels10.1016/j.apsusc.2013.05.037 ↗
21. Tribological properties of composite Ti(N,O,C) coatings containing hard amorphous carbon layers10.1016/S0257-8972(99)00514-9 ↗
22. Tribological characterisation of magnetron sputtered Ti(C, O, N) thin films10.1504/IJMPT.2010.034270 ↗
23. Deposition and characterization of Ti(C,N,O) coatings by unbalanced magnetron sputtering10.1016/S0257-8972(02)00494-2 ↗
24. The influences of Ag content on the friction and wear properties of TiCN–Ag films10.1016/j.vacuum.2021.110719 ↗
25. Influence of silver content on the tribomechanical behavior on Ag-TiCN bioactive coatings10.1016/j.surfcoat.2011.09.059 ↗
26. Tribocorrosion behavior of low friction TiSiCN nanocomposite coatings deposited on titanium alloy for biomedical applications10.1016/j.surfcoat.2018.04.049 ↗
27. Magnetron sputtering of nanocomposite (Ti,Cr)CNyDLC coatings10.1016/S0257-8972(02)00561-3 ↗
28. Corrosion and tribological performance of quasi-stoichiometric titanium containing carbo-nitride coatings10.1016/j.arabjc.2016.09.009 ↗
29. Study of (Zr,Ti)CN, (Zr,Hf)CN and (Zr,Nb)CN films prepared by reactive magnetron sputtering10.1016/j.tsf.2011.01.375 ↗
30. GOST 19807-91 Wrought Titanium and Titanium Alloys (2022, March 30). Grades GOST № 19807-91 from 17 July 1991. Available online: http://vsegost.com/Catalog/28/28149.shtml.
31. Mamaeva, A., Kenzhegulov, A., Panichkin, A., Alibekov, Z., and Wieleba, W. (2022). Effect of Magnetron Sputtering Deposition Conditions on the Mechanical and Tribological Properties of Wear-Resistant Titanium Carbonitride Coatings. Coatings, 12.10.3390/coatings12020193 ↗
32. Constitution and microstructure of magnetron sputtered nanocomposite coatings in the system Ti–Al–N–C10.1016/j.tsf.2005.07.290 ↗
33. Pathways of atomistic processes on TiN(001) and (111) surfaces during film growth: An ab initio study J10.1063/1.1567797 ↗
34. Physical metallurgy
35. Mechri, H., Saoula, N., and Madaoui, N. (2016, January 31). Friction and wear behaviors of TiCN coating treated by R.F magnetron sputtering. Proceedings of the 7th African Conference on Non Destructive Testing ACNDT 2016 & the 5th International Conference on NDT and Materials Industry and Alloys (IC-WNDT-MI): Research Center in Industrial Technologies CRTI, Algiers, Algeria.
36. Adhesion properties of calcium phosphate coatings on titanium
37. Characterization of TiCN and TiCN/ZrN coatings for cutting tool application10.1016/j.ceramint.2012.07.061 ↗
38. Toughness of hard nanostructured ceramic thin films10.1016/j.surfcoat.2006.07.020 ↗
39. The Deformation and Ageing of Mild Steel: III Discussion of Results10.1088/0370-1301/64/9/303 ↗
40. The Cleavage Strength of Polycrystals
41. Designing advanced coatings for wear protection10.1179/sur.1991.7.2.137 ↗
42. Synthesis and mechanical properties of TiAlCxN1−x coatings deposited by arc ion plating10.1016/j.surfcoat.2005.08.065 ↗
43. On the significance of the H/E ratio in wear control: A nanocomposite coating approach to optimized tribological behavior10.1016/S0043-1648(00)00488-9 ↗
44. Lou, J., Gao, Z., Zhang, J., He, H., and Wang, X. (2021). Comparative investigation on corrosion resistance of stainless steels coated with titanium nitride, nitrogen titanium carbide and titanium-diamond-like carbon films. Coatings, 11.10.3390/coatings11121543 ↗