HVOF Cermet Coatings to Improve Sliding Wear Resistance in Engineering Systems
Source abstract
Abstract
High-Velocity Oxy-Fuel (HVOF) cermet coatings are widely employed in sliding conditions, due to their optimized microstructure, composed of a carbide phase embedded into a ductile metal matrix. In the present short review, the characteristics and mechanical properties of HVOF cermet coatings are considered, and the dry sliding behaviour of the main types of coatings is analysed at room and high temperature. The role of microstructural parameters, including defects, surface roughness and the nature of the counterface is discussed. The review also considers a specific application, namely HVOF coatings for discs in brake applications. This application is gaining in importance, since it reduces the wear of the braking components and thus the emission of airborne particulate matter.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Advanced materials and composites · Tribology and Wear Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Dept. Industrial Engineering, University of Trento, 38122 Trento, Italy
References (40)
Show source-provided references
1. The tribological and electrochemical behavior of HVOF-sprayed Cr3C2–NiCr ceramic coating on carbon steel10.1016/j.ceramint.2014.12.102 ↗
2. A comparative study on the microstructure and surface property evaluation of coatings produced from nanostructured and conventional WC-Co powders HVOF-sprayed on Al707510.1016/j.surfcoat.2015.06.017 ↗
3. Sliding wear properties of HVOF sprayed WC-20%Cr3C2-7%Ni cermet coatings10.1016/j.surfcoat.2006.10.007 ↗
4. Wear characteristics of Cr 3 C 2 -NiCr and WC-Co coatings deposited by LPG fueled HVOF10.1016/j.triboint.2009.12.016 ↗
5. Numerical analysis of flame and particle behavior in an HVOF thermal spray process10.1016/j.matdes.2016.02.008 ↗
6. Effect of oxygen/fuel ratio on the in-flight particle parameters and properties of HVOF WC-CoCr coatings10.1016/j.surfcoat.2011.03.129 ↗
7. Optimizing HVOF spray process parameters to attain minimum porosity and maximum hardness in WC-10Co-4Cr coatings10.1016/j.surfcoat.2014.03.022 ↗
8. Straffelini, G. (2015). Friction and Wear Methodologies for Design and Control, Springer International Publishing.10.1007/978-3-319-05894-8 ↗
9. Optimization Parameters of WC-12Co HVOF Sprayed Coatings on SUS 400 Stainless Steel10.1016/j.promfg.2019.02.071 ↗
10. The parameters optimization and abrasion wear mechanism of liquid fuel HVOF sprayed bimodal WC-12Co coating10.1016/j.surfcoat.2011.09.071 ↗
11. Microstructural and mechanical properties of advanced HVOF-sprayed WC-based cermet coatings10.1016/j.surfcoat.2015.12.016 ↗
12. Abrasive wear behaviour of WC–CoCr and Cr3C2–20(NiCr) deposited by HVOF and detonation spray processes10.1016/j.surfcoat.2004.10.136 ↗
13. Multimodal powders: A new class of feedstock material for thermal spraying of hard coatings10.1016/S1359-6462(01)00866-1 ↗
14. Structure and wear behaviour of HVOF sprayed Cr3C2-NiCr and WC-Co coatings10.1016/S0261-3069(03)00059-1 ↗
15. Berndt, C.C. (1996, January 7–11). Chromium carbide coatings produced with various HVOF spray systems. Proceedings of the Thermal Spray Practical Solutions for Engineering Problems. In Proceedings of the 9th National Thermal Spray Conference, Cincinnati, OH, USA.
16. Effect of Carbide Grain Size on the Sliding and Abrasive Wear Behavior of Thermally Sprayed WC-Co Coatings10.1080/10402009708983682 ↗
17. Microstructure and sliding wear behaviour of thermal spray carbide coatings
18. Sliding wear behaviour of HVOF sprayed WC–Co coatings deposited with both gas-fuelled and liquid-fuelled systems10.1016/S0043-1648(03)00293-X ↗
19. Microstructural and tribological studies of as-sprayed and heat-treated HVOF Cr3C2–CoNiCrAlY coatings with a CoNiCrAlY bond coat10.1016/j.surfcoat.2014.10.039 ↗
20. Comparative study of the dry sliding wear behaviour of HVOF-sprayed WC-(W,Cr)2C-Ni and WC-CoCr hardmetal coatings10.1016/j.wear.2013.11.001 ↗
21. Tribocorrosion behaviour of HVOF cermet coatings10.1016/j.corsci.2007.02.003 ↗
22. Comparison between WC-10Co-4Cr and Cr3C2-25NiCr coatings sprayed on H13 steel by HVOF10.1016/S1003-6326(15)64011-0 ↗
23. Improving the wear resistance of HVOF sprayed WC-Co coatings by adding submicron-sized WC particles at the splats’ interfaces10.1016/j.surfcoat.2015.11.017 ↗
24. Microstructural Characteristics and Tribological Behavior of HVOF-Sprayed Novel Fe-Based Alloy Coatings10.3390/coatings4010098 ↗
25. Microstructural evolution and tribological behavior of Mo–Cu–N coatings as a function of Cu content10.1016/j.matchemphys.2011.08.002 ↗
26. Surface properties of Mo-implanted PVD TiN coatings using MEVVA source10.1016/j.apsusc.2013.05.014 ↗
27. Wear engineering oxides/anti-wear oxides10.1016/S0043-1648(98)00181-1 ↗
28. Composite coating containing WC/12Co cermet and Fe-based metallic glass deposited by high-velocity oxygen fuel spraying10.1016/j.jallcom.2010.03.209 ↗
29. Cermet coatings with Fe-based matrix as alternative to WC–CoCr: Mechanical and tribological behaviours10.1016/j.surfcoat.2012.03.094 ↗
30. Tribology of FeVCrC coatings deposited by HVOF and HVAF thermal spray processes10.1016/j.wear.2017.10.014 ↗
31. Properties of HVOF-sprayed TiC-FeCrAl coatings10.1016/j.wear.2018.11.002 ↗
32. Pin-on-disc study of a friction material dry sliding against HVOF coated discs at room temperature and 300 °C10.1016/j.triboint.2017.05.030 ↗
33. Friction, Temperature, and Wear Analysis for Ceramic Coated Brake Disks10.1115/1.2831558 ↗
34. Braking performance and noise in excessive worn brake discs coated with HVOF thermal spray process10.1007/s12206-017-0106-4 ↗
35. A pin-on-disc simulation of airborne wear particles from disc brakes10.1016/j.wear.2009.11.014 ↗
36. Effect of roughness on the wear behavior of HVOF coatings dry sliding against a friction material10.1016/j.wear.2016.10.013 ↗
37. Sliding Behaviour of Friction Material Against Cermet Coatings: Pin-on-Disc Study of the Running-in Stage10.1007/s11249-018-1004-3 ↗
38. A pin-on-disc tribometer study of disc brake contact pairs with respect to wear and airborne particle emissions
39. Characterization of airborne wear debris produced by brake pads pressed against HVOF-coated discs10.1007/s40544-019-0284-4 ↗
40. ECHA (2020, June 01). SVHC List. Available online: https://echa.europa.eu/it/candidate-list-table?p_p_id=disslists_WAR_disslistsportlet&p_p_lifecycle=1&p_p_state=normal&p_p_mode=view&p_p_col_id=column1&p_p_col_pos=2&p_p_col_count=3&_disslists_WAR_disslistsportlet_javax.portlet.action=searchDissLists.